Melodeon.net Forums

Discussions => Other Free Reed Instruments => Topic started by: Garry Probert on August 27, 2017, 11:01:23 PM

Title: pancotti macerat accordion for spare parts ?
Post by: Garry Probert on August 27, 2017, 11:01:23 PM
Hi guys visited a boot fair today always on the lookout came across this rather swanky looking  pancotti macerata accordion f £20 missing a few key covers but lots of aluminium frame reeds in surprisingly clean condition but the thing weighs a ton.
Wonder if anyone has any info on the date and make as google doesn't seem to have a lot of info on them, dont think its a  rare instrument and i bought it just for the reeds but didn't want to strip it if its "interesting"
thanks

 
Title: Re: pancotti macerat accordion for spare parts ?
Post by: Garry Probert on August 28, 2017, 03:58:32 PM
Hi guys lots of views and ,no .............don't do it" lol

So assuming it's just an old italian workhorse I can happily cannibalize for the reeds without my inherent vintage instrument guilt creeping in.
 
Title: Re: pancotti macerat accordion for spare parts ?
Post by: Malcolm Clapp on August 29, 2017, 02:15:47 AM
Imo, cannibalize away without guilt >:E

The cost of restoration will almost certainly exceed its value as a playing instrument, and it isn't a model that has much interest to collectors.
However, Pancotti are reputed to have made some interesting melodeons, if you ever come across one....

Not only a decent number of reeds to play with, but suggest you also put aside the bellows pins which may come in handy, plus a supply of small screws which you might find useful for other projects.
Title: Re: pancotti macerat accordion for spare parts ?
Post by: Mike-T on August 29, 2017, 08:59:05 AM
Plus a set of bellows to make a tuning table with  (:)
Title: Re: pancotti macerat accordion for spare parts ?
Post by: Theo on August 29, 2017, 09:32:17 AM
A spare base button can come in handy as Hohner air button,  and that cream pearloid might be useful if you need to repair damage on another box.
Title: Re: pancotti macerat accordion for spare parts ?
Post by: Garry Probert on August 29, 2017, 11:13:20 AM
Thanks guys ,something very satisfying dismantling and putting all the little screws into pots along with springs etc
Hadn't really noticed the straps applied me lord sheringham came up great

I really dont need the parts but its just nice to have then just in case. thanks for the info I will save all the suggested bits I was a little disappointed they were not zinc reeds but the few i've tried sound great, they have a little line across the corner no idea what that denotes or how old the PA is but it must have been stored well, as no rust just floppy valves.

I also bought an awesome pair of Ron marks 60s water ski,s .....................just couldn't resist them 
shelving,wine rack no idea what to do with them and i,m trying to declutter lol     
Title: Re: pancotti macerat accordion for spare parts ?
Post by: Theo on August 29, 2017, 01:45:02 PM
The line across the corner is on virtually all Italian reeds and shows which side is the top.
Title: Re: pancotti macerat accordion for spare parts ?
Post by: Garry Probert on August 29, 2017, 07:33:44 PM
Hi theo
Quote
The line across the corner is on virtually all Italian reeds and shows which side is the top.
thanks for the info ,they look hand scribed and a few reeds have two lines?i,m just guessing the PA is 30s/40s from the look but i,m intrigued as its actual age as the inside is incredibly clean and it also has an aluminium soundboard this is probably standard
but i've only had a couple of old PAs so thought it unusual.
Title: Re: pancotti macerat accordion for spare parts ?
Post by: Theo on August 29, 2017, 10:51:16 PM
Sometimes the number of lines on the corner is to identify which bank of reeds they belong to.
Title: Re: pancotti macerat accordion for spare parts ?
Post by: triskel on August 30, 2017, 12:11:57 AM
i,m just guessing the PA is 30s/40s from the look but i,m intrigued as its actual age as the inside is incredibly clean and it also has an aluminium soundboard this is probably standard
but i've only had a couple of old PAs so thought it unusual.

The shape of the keyboard ends is very Art Deco in style (think 1930's cinemas!), and not a design you'd see too often on an accordion. Art Deco ends, usually in a simpler and more angular design, seem to have been fashionable around 1936-7 whilst, by late 1937, the new 1938 Italian models were already starting to get streamlined. By the end of the 1930's/beginning of the 1940s they were already fully streamlined.

Many of the best 1930's accordions had aluminium soundboards.
SimplePortal 2.3.5 © 2008-2012, SimplePortal