Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Hasse on October 28, 2008, 09:57:19 PM
-
I have a 4 voice box and until recently it was a C/C#, but I changed it to C#/C. Before changing there was a small air rush before the reed was activated when playing 1 voice (F1) in the C# row (inner row). Now after changing the reed plates this problem remains on the same reed block, now being the C row. This rush of air didn't turn up until after one or two weeks of playing the box. Could it simply be that I need to improve the fixation of reedblock to the soundboard?
When checking the reedblock it seems to be straight. I had some problems with the slides not closing enough, but that was just caused by debris and a thrashed leather valve, so I don't think that's the problem. Any ideas ???
Edited 29 October:
Well, maybe I should add that I didn’t notice this problem until after I attended a small after work session… with beer… not that much playing really… but beer… and something with happy dancing people and a hard wall… Well, now I confessed! Oh dear oh dear… :-[
Hasse
-
Hi Hasse
It does sound as if the air leak is doe to a badly fitting reedblock. Another thing to check is for damage to the reedblock itself. Some reedblock designs leave a weakness between the base plate and the rest of the block. Like this picture:
-
Thanks for your answer Theo!
It gives me more ideas to work with. I think I'm gonna start with the fixation of the reedblock, and hopefully that will work. Maybe I ought to work with the fixation of the other reed blocks, just to prevent any future problems. But then again, I don't plan to bump into wall with my box in the near future, and there is no need to create new problems where there aren't any yet!
Thanks! :)