Melodeon.net Forums
Discussions => Instrument Makes and Models => Topic started by: Pierre B on October 28, 2012, 12:45:05 PM
-
Hi,
Post here because the FR-18 UG doesn't seem to have the answer to my question.
How do I identify the 12 keyboard layouts (tablature) in the manual? Nothing in the manual says, for exemple, tab 1 is XYZ, tab = XZ, etc.
What's the difference between choosing a Key and choosing a tablature? The box is in G (GCF, I guess) by default. If I change key, how does is affect the keyboard layout?
The manual is really not explicit about that.
Thank you.
-
How do I identify the 12 keyboard layouts (tablature) in the manual? Nothing in the manual says, for exemple, tab 1 is XYZ, tab = XZ, etc.
The tab pics show each button and the push/pull note in each of the 12 tabs
What's the difference between choosing a Key and choosing a tablature? The box is in G (GCF, I guess) by default. If I change key, how does is affect the keyboard layout?
If you change the key to say, A, the layout doesn't change however GCF becomes ADG... afaik ;)
-
"The tab pics show each button and the push/pull note in each of the 12 tabs"
Thanks xgx
Realy unfriendly and dum. Roland missed the target. When you buy a box with a specific layout, you say I want a B/C, a A/D, etc. You don't say I want 1st row, 1st button is B, etc.
Anyway, on a certain Roland forum (not here), many rate the manual as badly done.
-
Gives you really good instructions on how to fit the bass strap!!!! Seriously though it is all there but not explicit and not easy to navigate through. Didn't help that mine has disintegrated with use so the page sare all over the place!
On the topic of posts it is possibly better to extend a post rather than keep adding new ones on related topics?? Theo any comments???
-
Ray , as a bookbinder I can either repair your manual or send you a new bound copy.
If you would like to PM me we could sort it out. Free gratis of course, us Melnetters must stick together.
-
That's a very fine offer, but I've punched holes in it and put it in a ring binder now!
-
Has anyone ever read an easy to follow manual on anything. I have had thousands on different tools, machines, instruments and assemblies. I can never remember a step by step instructional which is easy to follow.
I understand that changing a key affects the outside row on treble and bass no matter which tablature as they call it is selected.
Does a tablature have to be changed completely to off to install one's own structure. I did not do that, but without that; I could not effectively overwrite with my selection as yet. What is the fix?
Pilot
-
Has anyone ever read an easy to follow manual on anything. I have had thousands on different tools, machines, instruments and assemblies. I can never remember a step by step instructional which is easy to follow.
I understand that changing a key affects the outside row on treble and bass no matter which tablature as they call it is selected.
Does a tablature have to be changed completely to off to install one's own structure. I did not do that, but without that; I could not effectively overwrite with my selection as yet. What is the fix?
Pilot
setting the 'key' on your selected tablature changes all three rows and all the basses too. Just keep reading, be patient and you will get there. The tablatures are set for many different designs of keyboard. Decide on the one you want, set the key and away you go! When you have a spare 30 minutes, look at the printed tablature plans and you will find BC, three row quint boxes, organettos, the lot, but not bcc# you have to write your own for that. Good luck.
-
I understand that changing a key affects the outside row on treble and bass no matter which tablature as they call it is selected.
Does a tablature have to be changed completely to off to install one's own structure. I did not do that, but without that; I could not effectively overwrite with my selection as yet. What is the fix?
Pilot
Pilot, are you using Roland's Tablature Maker to install your own button values ? If you are then whichever Tab you alter, or rewrite, will be overwritten when you reload it back into the FR-18 via the USB stick. If you are changing just one of the 12 tablatures, it will also re-install, or overwrite, the other eleven tabs with the existing tabs which reside in the Tab Maker programme; these correspond with those in the manual. The idea of the off button is to assist you in replicating a chosen layout; if you have a ten button first row then the off button allows you to switch off the two unwanted buttons in the FR-18's 12-button first row, so that they don't sound. As far as altering an existing tablature, you can change one or as many buttons as you desire, it's entirely up to you and it will have no bearing on the ability to save the amended file.
I'm not sure if this is valid, but if I was changing a layout in a tablature, to maintain consistency with most of the other tabs, I would set up my desired start button (most of them appear to be 3rd button start) in the Key of G, and then use the key change button to transpose the keyboard layout to my chosen key. But don't forget to save your Key setting before you switch it off, otherwise it will go back to the default key of G.
I was rather fortunate, with regard to the layout, as Tablature 1 corresponded with my "proper" box so I've not had to import another layout but I do have plans to experiment with other "alterations" to make up for the lack of reversals, but that's a project for the future.
I hope this answers your query and that you can make sense of it, but if not I'm happy to pass on what knowledge I have gained, pm me if necessary.
Ian