Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: melod-ian on November 04, 2012, 07:28:53 PM

Title: re-reeding/tuning a cheap 3 row
Post by: melod-ian on November 04, 2012, 07:28:53 PM
So i've taken a bit of a plunge into learning a new system ! brought a very cheap 3 row GCF Barronelli off ebay.
It plays perfect, only except the tuning is very dry and a bit weak sounding.
although its a good box to learn on , im really after a more wet/ fuller sounding box.

I'm think before i get too involved in this, am i asking to much to get a Corona II sound out of a cheap instrument?, or would it really be worth just buying the Hohner.

Its just quite a nice looking box, even if the sound isn't what I'm after.

I was think of just sending the reed blocks off to someone who knows... if i start taking instruments  apart , they stay in bits :-[

what are your thoughts ?
Title: Re: re-reeding/tuning a cheap 3 row
Post by: nemethmik on November 04, 2012, 07:42:48 PM
am i asking to much to get a Corona II sound out of a cheap instrument?
...
what are your thoughts ?
If you are lucky, you can buy a Hohner Corona II off ebay.de around 300 euros.
You are a fine musician (one of the best), what music are you going to play with the Corona? Tex-Mex, Colombian?
Title: Re: re-reeding/tuning a cheap 3 row
Post by: melod-ian on November 04, 2012, 07:55:58 PM
thank you very much.. i'll be using it for a bit of Tex-Mex, but its mainly for Zydeco.
i'm keeping an eye out for a cheap Corona II..

as i say, i actually like the look of this one, if it sounded a nice as it looked it would be perfect.
SimplePortal 2.3.5 © 2008-2012, SimplePortal