Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: blackdot1234 on November 25, 2008, 07:30:30 PM
-
i have tommy from 2001 tuned LMM is it possible to have the low 3rd voice brought up to middle to go with other sets of reeds by tuning or would reeds need to be changed it is b/c
-
You would definitely need to have the low set of reeds replaced. Tuning up an octave is just not a practical possibility.
-
thanks for that they are antonelli reeds any idea on cost of them and fitting and tuning
-
Well Antonelli branded reeds are no longer made. Antonelli and a couple of other reed makers amalgamated a few years ago and they now trade as Voci Armoniche.
-
How about these ones?
http://www.briggsaccordions.com/images%20reeds%201.html
-
yes i saw these in the briggs as well they are the same as mine and i think cairdin is using them as well are they not made by antonelli any more but stamped with the brand name
-
would the voci reeds be a good match to put in to tommy
-
would the voci reeds be a good match to put in to tommy
I am use Voci Armoniche reeds in my own boxes and they are very good.
regards
aaro
-
thanks for the help i wonder where briggs is getting his antonelli reeds or can you order diffrent types from voci.if so would it be the norm to fit a third middle set or something else the two other voices are dry tuned
-
thanks for all info i will go for middle reeds and make a new reed block so i can keep low set .will i be able to router out a reed block from solid ie beech,mahogany or cherry and glue on a bottom closure piece .what would be the easiest way, has anyone made there own reed blocks if so let me know does the timber make that much diffrence