Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: EastAnglianTed on December 28, 2012, 09:15:48 PM

Title: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: EastAnglianTed on December 28, 2012, 09:15:48 PM
    As the topic title says. I love my Erica, so was wondering;
    Is it possible? Is it worth it, how much would it be? Has anyone tried it before? Does it make sense?
    I ask as I have recently borrowed my uncles Castagnari Mory and fell in love with the amount of bass notes I had to play with. I'm not saying install handmade reeds or anything, but tinker with the innards and install some old Hohner reeds. Hmmmmm...
    Not really a pressing subject, I may have the dosh in the next few months, but I have repaired one of my old Melodeons, and it works quite well. Is there a 12 bass end that would fit an Erica D/G?
    Arrgh, the speculation!  >:E
Title: Re: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: Theo on December 28, 2012, 09:37:29 PM
The bass end reed blocks and mechanism from a Hohner Corona will give you most of the parts required.
Title: Re: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: Microbot on December 28, 2012, 09:41:03 PM
Hi Ted,

just spotted your Melnet query ... I agree, the Erica is a brilliant instrument, and a 12 bass version even better ...

...have a look at my website...

http://www.michaelrowbotham.eclipse.co.uk/melodeons.html

....on the 'melodeons' page it shows (centre bottom) a black 12 bass Erica. These were made in G/C, C/F and B/C - a D/G version, starting from one of these, would be fairly straightforward to set up. You could simply fit one of the 12 button bass ends to a D/G treble end, adding new bass/chord reeds of your choice.

But beware - some of the 12 bass B/C models are stradella-type unisonoric basses. Go for a C/F or G/C with 12 bass - all the ones I have seen have been melodeon-style diatonic basses.

Also beware, these 12 bass instruments have a 'rake' on the bass buttons, with the inner and outer row slightly offset (again have a look at the website Photo). This can be altered and made  'opposing', though some players do not find the rake a problem.

Good luck!

Mike R
Title: Re: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: Lester on December 28, 2012, 09:48:18 PM
Once I have finished my current C/C# to C/F Erica project I have a Double Ray in B/C with a 12 button stradella bass that will become a 4th button start 12 bass D/G. As Mike highlighted above the bass buttons currently have an offset between the inside and outside rows so I think I will have to fix that as well. Hopefully it will become my main box as it has all I need, Erica size and sound, 4th button start and 12 basses - what's not to like.
Title: Re: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: Microbot on December 28, 2012, 10:03:33 PM
Hi Ted, Theo and Lester

But .... don't ignore Theo's approach ... the advantage of Theo's approach is that, whilst you have a fair bit of jiggery pokery with swapping action and reedblocks using a Corona, there is no button 'rake' to deal with. You need simple open out 4 additional bass-button holes and install the reedblocks+action from the Corona... the buttons will then be all correctly aligned.

Mike
Title: Re: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: EastAnglianTed on December 28, 2012, 10:35:05 PM
    Cheers for the responses.
    So in essence, drill 4 extra holes in bass end of Erica, and source 4 extra action levers then replace existing reed blocks, for example, with exhibit a: http://www.ebay.com/itm/brand-new-hohner-ADG-BASS-reeds-fits-panther-corona-compadre-fast-shipping-/110985052504?_trksid=p2047675.m1850&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D13904%26meid%3D4483914853170005610%26pid%3D100011%26prg%3D1095%26rk%3D3%26sd%3D281030444282%26
    Then re-tune as/if necessary? Estimate circa £60-70 or so?   
    I'm a bit of a numbnut when it comes to picturing stuff in me noggin  ;D
Title: Re: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: EastAnglianTed on December 28, 2012, 10:40:37 PM
    Plus, Mike, that Erica on your site is a beautiful little number. I think, I could be wrong, that that photo is one of the only ones I've ever seen.
Title: Re: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: Harmonicatunes on December 28, 2012, 11:24:13 PM
My advice would be to get an expert to do the job for you. There are three on this thread.
Title: Re: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: EastAnglianTed on December 28, 2012, 11:54:18 PM
    Its a case of price and intrigue for me though. Saying that, any idea how much it would be professionally guys?
Title: Re: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: Theo on December 29, 2012, 12:05:41 AM
There is one other issue with the corona blocks that the holes in the chord block don't quite line up, which means there is a bit more work, and if course the reed block clamps all have to be replaced.
Title: Re: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: EastAnglianTed on December 29, 2012, 12:09:24 AM
    So it would be a hefty job then? ???
Title: Re: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: Adam-T on December 29, 2012, 08:21:26 AM
don`t let the thought of Raked bass buttons put you off a potentially easy option . I`ve never found bass button Rake (which is the standard fare on Steirisches and Heligonkas) to be an issue swapping to and back from so someone who`ll be playing the same box all the time should have a short initial getting used to period only, then it`ll be "Normal".....

I`d stick to the simplest method you can find to get the job done and leave hacking Corona reedblocks and mechs into the original Erica casings to Pro fettlers like Theo (especially as the Chord reedblocks don`t line up) .
Title: Re: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: Keithypete. on December 29, 2012, 11:18:46 AM
https://picasaweb.google.com/103571715539757100098/DropBox?authkey=Gv1sRgCK7Qm-7n2Zu6FQ#5827323333517532018

As you can see, I'm part of the way through thus very job. I bought the mechanism - comes without arms - direct from Hohner. I have adapted some arms with stiff wire to allow me to use pistons and screw-in buttons. The mechanical/ cabinet making side isn't too daunting or difficult. Tuning will be left to a professional tuner.
Title: Re: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: EastAnglianTed on December 29, 2012, 02:50:40 PM
    Sorry Keithypete, your link doesn't seem to be working for me.
    And yeah, thinking I may start getting quotes from pro's, providing it won't cost an arm and a leg.
Title: Re: Bumping a 2-row 8-bass Erica up to a 2-row 12-bass
Post by: Keithypete. on December 29, 2012, 05:18:35 PM
I have put a new link in, which should take you to the picture of the work in progress.

Adam, although the chord reedblocks don't line - as Theo pointed out to me - it's relatively straightforward to remove the sole, and flip it into position & re-affix. My problem is that now I have 50% more bass than before, I don't know what to do with them all. Or what they should be on a B/C. Any suggestions?
SimplePortal 2.3.5 © 2008-2012, SimplePortal