Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Owen Woods on December 31, 2012, 01:30:15 PM
-
I've just written a blog post about the melodeon fingering system invented by Jon Loomes of this parish. Should be of interest to many here I would think! I think that the layout has a lot of potential.
http://ukebert.wordpress.com/2012/12/31/the-loomes-chromatic/
-
Forgotten that one! I'll make a button for it in the 'explorer' ::)
-
Please do! I did try to put it in to yours, but was discouraged when a button was not forthcoming.
-
Looks iinteresting!
Joy
-
Would that layout be possible on an FR-18?
Nigel
-
Hmmmmm........
-
i can see your point about six notes giving a regular repeated layout.where as seven note layout becomes confused in the high octave,more so for learners.in effect you have taken the twelve notes(chromatic) and spread them over two rows. any new ideas should be encouraged as it may lead to new possibilities.
i was wondering about a one row;- if we added a extra note to the seven(diatonic)notes to make eight,we could make a regular keyboard pattern.
GA
BC
DE
Ffs
GA
BC
DE
Ffs
GA
-
Done. (took 11 minutes)! http://squeezebox.chrisryall.net/ now has a Loomes button :|glug
The 'augmented' scales are awesome!
-
Ah, thanks for that. Turns out that a surprising number of chords are possible for any 6 of the 12 keys.
-
I have a Hohner Club II C/F that I was planning to convert to D/G, but I thought while I'm doing it, it might be a fun project to try the whole tone layout.
I bought a job lot of busted Hohner accordions just before Christmas, and the reeds from these should be emminently suitable for conversion.
The layout I was thinking of is attached, and I would grateful if any of the Melnet gurus could cast a critical eye over it.
-
I have a Hohner Club II C/F that I was planning to convert to D/G, but I thought while I'm doing it, it might be a fun project to try the whole tone layout.
I bought a job lot of busted Hohner accordions just before Christmas, and the reeds from these should be emminently suitable for conversion.
The layout I was thinking of is attached, and I would grateful if any of the Melnet gurus could cast a critical eye over it.
I don't think your inside (G-ish) row is quite right. It should be the same as the inside row of Ukebert's modified layout here (http://ukebert.wordpress.com/2012/12/31/the-loomes-chromatic/) (scroll down the page).
-
I have a Hohner Club II C/F that I was planning to convert to D/G, but I thought while I'm doing it, it might be a fun project to try the whole tone layout.
I bought a job lot of busted Hohner accordions just before Christmas, and the reeds from these should be emminently suitable for conversion.
The layout I was thinking of is attached, and I would grateful if any of the Melnet gurus could cast a critical eye over it.
As Steve said, the two options are the rows a fourth apart, or the rows a semitone apart. You have your rows a minor third aapart, which makes fingering rather tricky.
-
The inside (G-ish) row done this way to facilitate right hand chords.
-
Ah fair enough. In which case I would suggest moving the outermost row one button to the left, so that you get D and C# on the push on the two rows (and move the notes of the half row one button to the right). I think that this will mean that the standard major scale will be a lot easier on the fingers.
-
there seems to be several people trying to improve the keyboard layout in various ways. Have you seen the INVENTOR's new keyboard on another thread.(temperance and things).
with so much individual expertise and enthusiasm ,its a pity that you dont work together on this. can we have some one knowledgeable to write a review, and compare the various developments ? is there a compromise between diatonic and "super chromatic". a middle ground ,with some improvements but retaining a simplicity that is the essence of folk instruments. players need to say what they want,and make comments on this, as it may change the face of melodeons in the future.
brian (bellowpin)
-
I'm working on it! :P
-
Keep at it chaps! I have dabbled many times over the years with the search for a better diatonic keyboard arrangement box but have always hit a snag somewhere along the road. However If more than a limited range of keys is required I come back to the BCC# every time . However 3 extra buttons on a 4th row providing push A's and pull G's for each octave would be handy. Using the 'Shand' system the extra reeds could be incorporated in the existing number of reedblocks which would only need to be longer by one reedplate each. On most boxes there would be room for the extra 3 buttons between the normal 'inside' row and the grille.
george
-
is this the same jon loomes who makes demo clips for The Music Room? i'm in the u.s., but a thorough and good-humored demo of the Morse Geordie baritone 45b model magically appeared on their site of this gentleman putting it through its paces after i emailed a query as to what it was like and how it compared/contrasted with the Morse Albion baritone.... :||:
-
is this the same jon loomes who makes demo clips for The Music Room?
Yes - the very same man!
-
"Yes - the very same man!"
Now I misread that as "the very sane man"... but no. :o