Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: malcolmbebb on January 06, 2013, 06:54:27 PM

Title: Another fingerboard question
Post by: malcolmbebb on January 06, 2013, 06:54:27 PM
The subject line works on two levels, if you're bored enough to be interested.

Anyway, seen this (http://www.ebay.co.uk/itm/Hohner-Melodeon-Diatonique-melodeon-Fingerboard-Kit-/251206294118?pt=UK_MusicalInstr_Keyboard_RL&var=&hash=item3a7d0fda66) a couple of times on Ebay. Is this the same one that Theo and Charlie supply, or a competitor?

And anyone bought one? (if different)

Minor edits added!
Title: Re: Another fingerboard question
Post by: Lester on January 06, 2013, 06:57:35 PM
The subject line works on two levels, if you're bored enough to be interested.

Anyway, seen this (http://www.ebay.co.uk/itm/Hohner-Melodeon-Diatonique-melodeon-Fingerboard-Kit-/251206294118?pt=UK_MusicalInstr_Keyboard_RL&var=&hash=item3a7d0fda66) a couple of times on Ebay. Is this the same one that Theo and Charlie, or a competitor?

And anyone bought one?

I guess it is the same item as supplied by Theo/Charlie and Jilly/Pete of this parish who makes them.

http://forum.melodeon.net/index.php/topic,8938.0.html (http://forum.melodeon.net/index.php/topic,8938.0.html)

I have one on the Pokerwork of Death, it was an early one and has paint finish issues (now solved I beleive) but not a bad piece of kit.
Title: Re: Another fingerboard question
Post by: Theo on January 06, 2013, 06:58:48 PM
It is the same one, being sold direct from the maker, Pete Ward of Acorn accordions.  In fact the photos are some I took for him of the prototype, the same photos appear on my website. They are slightly cheaper from Charlie and myself at present, but will be going up to the same price as Pete sometime soon. Also available in bare wood for finishing to your own prefered style.
Title: Re: Another fingerboard question
Post by: pete /acorn on January 06, 2013, 07:50:12 PM
Hi
The price I am charging on ebay inc postage,I will not be supplying to private individuals except through ebay,it took too much time talking on phone dealing with potential customers then orders not placed
As Lester indicates the paint finish is now better,also the back and top of the fingerboard is thicker than originals
un finished also available

Bonafide trade enquiries welcome.

Pete

Title: Re: Another fingerboard question
Post by: malcolmbebb on January 06, 2013, 08:02:32 PM
Well, good luck Pete. Hope you sell a good few!


Theo, save me PM'ing, have you got an old style 2915 au naturel in stock?


(Typo corrected!)
Title: Re: Another fingerboard question
Post by: syale on January 07, 2013, 12:34:53 AM
Is there a single row (114) available?

Stephen
Title: Re: Another fingerboard question
Post by: Theo on January 07, 2013, 08:30:44 AM
No there is not an Acorn keyboard for 114. 
Title: Re: Another fingerboard question
Post by: pete /acorn on January 07, 2013, 08:44:00 AM
Hi
If someone can lend me a keyboard for a 114 or let me have a broken one I will be making another batch next week and will do a 114 version.

Pete
Title: Re: Another fingerboard question
Post by: syale on January 08, 2013, 01:16:31 AM
Hi
If someone can lend me a keyboard for a 114 or let me have a broken one I will be making another batch next week and will do a 114 version.

Pete

 And I would be a customer  (:)
Title: Re: Another fingerboard question
Post by: WestOz on January 08, 2013, 04:45:12 AM
I have bought & fitted a couple of Pete's Fingerboards  - really improve the Pokerworks, with removable back, key packing limiting button travel, and a thumb groove. Good product and good service from Charlie.
Title: Re: Another fingerboard question
Post by: brianread on January 08, 2013, 09:36:21 AM
I bought one originally from Pete, and fitted it.  Highly recommended.  My Pokerwork has been lent to a beginner, who has now bought her own box, but is saying she misses the thumb groove, so i'll be fitting one of these for her at some point.
Title: Re: Another fingerboard question
Post by: Lester on January 08, 2013, 09:41:54 AM
I may be the only one who does not like thumb grooves on any keyboard. I play with my thumb on the back edge of the keyboard so having a thumb groove just presents a sharper edge to rest my thumb on, so I actually prefer the original Hohner wooden or plastic keyboards. YMMV
Title: Re: Another fingerboard question
Post by: pete /acorn on January 08, 2013, 10:06:55 AM
My fingerboards don't have to have the thumb groove and could be made as per the rounded front edge of the origionals but this would be a special order. I would like to point out that the top and bottom edge of the ones I make are very rounded therefore people who play with their thumb behind the fingerboard should not have a problem.

Pete
Title: Re: Another fingerboard question
Post by: Lester on January 08, 2013, 10:09:12 AM
My fingerboards don't have to have the thumb groove and could be made as per the rounded front edge of the origionals but this would be a special order. I would like to point out that the top and bottom edge of the ones I make are very rounded therefore people who play with their thumb behind the fingerboard should not have a problem.

Pete

I was careful to state "does not like thumb grooves on any keyboard" it was not a criticism of your keyboards.
Title: Re: Another fingerboard question
Post by: malcolmbebb on January 09, 2013, 06:58:10 PM
Well, my plain wood fingerboard turned up today - impressively swift delivery from Theo - and I think it's pretty good.  I kind of had it in mind from the photos that I might want to modify the thumb groove, but actually I think it's fine as it is.
Now looking for a suitable durable lacquer or varnish to finish it with.

To be fair to the exponents of the "Morris hook" I would agree that the thumb groove, nicely rounded though it is, would create a couple of pressure points that you wouldn't get on a standard Hohner 2915 style and I could see how they might not get on with it.

I personally don't like the Hohner rounded edge, my favourite so far is the Club/Liliput style lip but I think I will be able to get on pretty well with this new one.
Title: Re: Another fingerboard question
Post by: Lester on January 09, 2013, 07:01:47 PM
Now looking for a suitable durable lacquer or varnish to finish it with.

I use Halfords Clear Lacquer  (http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_203865_langId_-1_categoryId_165495)seems to be very durable as it is designed for car body spraying.
Title: Re: Another fingerboard question
Post by: Theo on January 09, 2013, 07:55:30 PM

Now looking for a suitable durable lacquer or varnish to finish it with.

If you want a super durable clear finish Rustins Plastic Coating (http://www.rustins.eu/Details.asp?ProductID=857) is just about the ultimate, and can be given a matt, silk or gloss surface.  It is the finish used by Emmanuel on the melodeon building courses.
Title: Re: Another fingerboard question
Post by: Lester on January 09, 2013, 08:05:46 PM

Now looking for a suitable durable lacquer or varnish to finish it with.

If you want a super durable clear finish Rustins Plastic Coating (http://www.rustins.eu/Details.asp?ProductID=857) is just about the ultimate, and can be given a matt, silk or gloss surface.  It is the finish used by Emmanuel on the melodeon building courses.

He also used car lacquer on the 2.5 row course for the grilles which is where I got the idae from.
Title: Re: Another fingerboard question
Post by: Owen Woods on January 09, 2013, 08:07:06 PM
When will you be producing a Corona one Pete? :P
Title: Re: Another fingerboard question
Post by: pete /acorn on January 09, 2013, 08:30:52 PM
I'm looking at those next week when I do the next batch,don't know how viable they will be,will advise

Pete
Title: Re: Another fingerboard question
Post by: Andrew Roche on January 09, 2013, 09:14:54 PM
Now looking for a suitable durable lacquer or varnish to finish it with.

Rustin's Plastic Coating would be a good choice but do bear in mind that it needs to be mixed with a hardener first, which can be a bit of a pain compared to just using it straight out of the can. Spray-on acrylic lacquer from cans is quite a hassle to use, (respiratory protection, newspaper everywhere, etc), especially if you haven't done any spraying before and, IMO, looks cheap.

You could do a lot worse than an oil finish. They're not as durable, (although that's not that much of a problem, as all the oil-finished guitar necks and gunstocks that endure constant handling will attest), but are inexpensive, ridiculously easy to apply, look a lot better, feel so much nicer under the hand and can easily be refreshed.

I use either Behlen waterborne urethane, ( http://www.behlen.co.uk/Merchant2/merchant.mvc?Screen=PROD&Product_Code=B640-29406&Category_Code=MIWBF ),  or Napier London Gunstock Oil, ( http://www.napieruk.com/acatalog/London_Gunstock_Kit.html ). Behlen also do a super tough tabletop varnish called Rockhard which is similar to Rustins Plastic Coating but doesn't need to be mixed first, although it's a lot more expensive and not as widely available.
Title: Re: Another fingerboard question
Post by: an bosca ceoil on January 09, 2013, 09:29:17 PM
While there is so much interest in replacing keyboards, please see my post in Buy & Sell.
(Thought it best to ask there to save Theo moving it (:))
Title: Re: Another fingerboard question
Post by: malcolmbebb on January 10, 2013, 06:39:22 PM
Thought of using the oils, and might do in future, but my immediate needs are quite small and I have other uses for lacquer.
SimplePortal 2.3.5 © 2008-2012, SimplePortal