Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: tedrick on February 08, 2013, 12:19:04 PM

Title: bad valve or bad reed?
Post by: tedrick on February 08, 2013, 12:19:04 PM
Hi Everyone -
I have a bad sounding high A - on my BC Cairdin mini - BC

so the A is on the pull - it sounds like this:

https://soundcloud.com/reedmunson/my-high-a-is-hinky

the problem started coming on a month ago or so - I would do the play the notes around that note/quick hard push/pull-trick and it would seem to restore the note to sounding normally again - but now that trick isn't working -

if you have a chance please take a listen - does it sound like one of the valves has just gotten mis-seated -- or is it a problem with the reed?

Thanks!
Reed
Title: Re: bad valve or bad reed?
Post by: Lester on February 08, 2013, 12:26:54 PM
Too hard for me to detect which of the notes is a high A, might be better to just play the one note for us.

But judging from the rest of your description I would guess at it being a valve problem.
Title: Re: bad valve or bad reed?
Post by: squeezy on February 08, 2013, 01:10:42 PM
It sounds like something tiny trapped between the reed and reed-plate to me - but it could also be a loose reed in the wax or a reed on the way out - all sound similar.

But as Lester says - from your description of being able to fix it by a bellows waggle to start with does make me think valve too.  You should probably open it up and give the reeds a ping and check around the wax and valves to see if you can see anything odd.

Cheers

Squeezy
Title: Re: bad valve or bad reed?
Post by: pikey on February 08, 2013, 01:52:32 PM
I had something similar with my Dino pro, it was a valve that was playing up, and it just needed stroking with a warm finger.
Title: Re: bad valve or bad reed?
Post by: Martyn on February 08, 2013, 03:15:51 PM
If you ping the reed tongue by lifting the tip slightly with a thin piece of brass or something similar and release it, that might work. Whatever it is it sounds easy to fix.

Martyn
Title: Re: bad valve or bad reed?
Post by: tedrick on February 08, 2013, 06:07:48 PM
Hi guys -
I have inspected and carefully pinged the reed, smoothed the valve - but I think the A might be on the inner side of the reed plate - so I might be in the position of having to remove the reed plates from their wax in order to see what is going on --

does this sound correct? on a standard BC, would the pull A be on the inner side of the plate?

Reed
Title: Re: bad valve or bad reed?
Post by: Lester on February 08, 2013, 06:12:09 PM
Hi guys -
I have inspected and carefully pinged the reed, smoothed the valve - but I think the A might be on the inner side of the reed plate - so I might be in the position of having to remove the reed plates from their wax in order to see what is going on --

does this sound correct? on a standard BC, would the pull A be on the inner side of the plate?

Reed

The inside reeds are the suck reeds the outside ones are the blow reeds.
Title: Re: bad valve or bad reed?
Post by: tedrick on February 08, 2013, 06:55:40 PM
so yeah - it's a pull/draw note then - I would have to cut it out - which is something I would not feel comfortable trying....
R
Title: Re: bad valve or bad reed?
Post by: squeezy on February 08, 2013, 07:11:00 PM
You could try lifting the valve on the outside and  gently extending the reed by pushing with a paper-clip through the slot.  A good hard blow will probably dislodge anything that might be obstructing the reed.  You can also shine a torch through the reedblock hole to see if the inner valve is not sitting right.
Title: Re: bad valve or bad reed?
Post by: oolong32 on February 08, 2013, 08:05:15 PM
I have a similar issue with the lower D on my G/C box. I've had a look several looks but there seems to be no fluff or similar thing obstructing the reed (it's a push note)  :(
Title: Re: bad valve or bad reed?
Post by: tedrick on February 09, 2013, 02:46:26 AM
Good news - I took the reed block out and played it like a harmonica and freed up what was ever causing the reed or valve to cause the reed not to sound right - might just be a temporary fix though -
we'll see... my box is due for a tuning so I'm looking forward to having my tuner give it a overhaul...
R
Title: Re: bad valve or bad reed?
Post by: squeezy on February 09, 2013, 12:34:56 PM
Just for the record - it probably won't cause any problem but you shouldn't generally blow the reeds in the block like a harmonica as that causes condensation from your breath on the metal and can also cause the valves to stick until it dries out.  I have to say I still do it occasionally though and it should be fine if you let it dry out.

The kind of blowing I was suggesting was a good hard blow from a short distance like blowing out a candle on a birthday cake with the reed lifted.

Whatever - it sounds like there was something, probably miniscule in there and you've moved it - I hope it stays that way!
Title: Re: bad valve or bad reed?
Post by: Theo on February 09, 2013, 01:03:13 PM
Just for the record - it probably won't cause any problem but you shouldn't generally blow the reeds in the block like a harmonica as that causes condensation

And you should never suck a reedblock like a harmonica because you will inhale any dust and rubbish that you dislodge.
Title: Re: bad valve or bad reed?
Post by: Nick Collis Bird on February 09, 2013, 01:38:50 PM
I had something similar with my Dino pro, it was a valve that was playing up, and it just needed stroking with a warm finger.

Don't we all ?
Title: Re: bad valve or bad reed?
Post by: Graham Spencer on February 09, 2013, 02:47:41 PM
I had something similar with my Dino pro, it was a valve that was playing up, and it just needed stroking with a warm finger.

Don't we all ?

I'm glad you said that - I've been trying desperately to resist responding in a somewhat unseemly manner......... ;D

Graham
Title: Re: bad valve or bad reed?
Post by: pikey on February 09, 2013, 04:40:14 PM
 >:E
SimplePortal 2.3.5 © 2008-2012, SimplePortal