Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Quebecois on December 26, 2008, 10:28:37 PM

Title: Replacement reeds - Harmona-Weltmeister - Any good?
Post by: Quebecois on December 26, 2008, 10:28:37 PM
Can someone tell me if these reeds (http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170282404377) are worth the money?

I would use them to restore a little 1-row and give it a new life.

Thanks.

Title: Re: Replacement reeds - Harmona-Weltmeister - Any good?
Post by: Lars on December 27, 2008, 05:06:37 PM
I used to play a Harmona/Weltmeister one row in D (made in the late 90's) before I got my Baldoni.

I found the reeds to be very good - they had a lot of toot, and though I played it very very rough I never found any problems with them. They kept in tune throughout the level of volume.

The only thing that I found was that they had a somewhat "harder" sound than similar italian reeds. Great sound for Quebecois, but nothing like the sound of a Hohner 114 or a Messervier.

At that price I have myself been temptet, but alas, the fincial issues...
Title: Re: Replacement reeds - Harmona-Weltmeister - Any good?
Post by: Martin J on December 27, 2008, 05:11:42 PM
Hi Québécois

Can't comment on those reeds but I have bought from Charlie Marshall on this site under Repairers etc. and his pricing was rather more competitive.  Depends on P&P for you I suppose.  Calls himself CGM, got a web site and supplies Castagnoni reeds.  I have always found it best to telephone him and get his recommendations, he's very helpful and knowledgable..  He often has items on Ebay.

Hope this helps.
Title: Re: Replacement reeds - Harmona-Weltmeister - Any good?
Post by: Aaro on December 27, 2008, 08:00:53 PM
Hi

I do not know if I am right, but to my knowledge Harmona use Harmonikas reeds from Czech.
http://www.harmonikas.cz/en/home.html
Correct me if I am wrong.

I've tried in Harmonikas reeds and they have been quite OK.

Aaro
Title: Re: Replacement reeds - Harmona-Weltmeister - Any good?
Post by: Quebecois on December 29, 2008, 03:21:16 PM
Hi Québécois

Can't comment on those reeds but I have bought from Charlie Marshall on this site under Repairers etc. and his pricing was rather more competitive.  Depends on P&P for you I suppose.  Calls himself CGM, got a web site and supplies Castagnoni reeds.  I have always found it best to telephone him and get his recommendations, he's very helpful and knowledgable..  He often has items on Ebay.
Hope this helps.
I contacted them and they have indeed very good deals on Cagnoni reeds, with very reasonable postage fees.
Thanks for the tip :)
Title: Re: Replacement reeds - Harmona-Weltmeister - Any good?
Post by: IanD on December 29, 2008, 03:39:57 PM
Hi

I do not know if I am right, but to my knowledge Harmona use Harmonikas reeds from Czech.
http://www.harmonikas.cz/en/home.html
Correct me if I am wrong.

I've tried in Harmonikas reeds and they have been quite OK.

Aaro

Hi Aaro

Have you tried any of their top-end "a mano" reeds which use spark erosion to cut the holes and have very fine clearance between reed and frame ?

Do you know how much these cost compared to "tipo a mano" reeds (and the Italian suppliers) ?

Cheers

Ian
Title: Re: Replacement reeds - Harmona-Weltmeister - Any good?
Post by: Aaro on December 30, 2008, 07:02:29 AM


Hi Aaro

Have you tried any of their top-end "a mano" reeds which use spark erosion to cut the holes and have very fine clearance between reed and frame ?

Do you know how much these cost compared to "tipo a mano" reeds (and the Italian suppliers) ?

Cheers

Ian

Hi Ian

I do not have the experience of Harmonikas A Mano reeds.
I am test only mechanica and export dural qualities reeds.    

I do not know their cost tipo a mano  or a mano reeds, but I think that they are close to the same as the Italian suplier.

Aaro
SimplePortal 2.3.5 © 2008-2012, SimplePortal