Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Auzivision on March 29, 2013, 03:21:04 PM

Title: Vienna Wonder one row purchased by a beginner
Post by: Auzivision on March 29, 2013, 03:21:04 PM
Just for fun I decided to buy following on Ebay just because it looked interesting and reasonably well preserved. 

(http://i205.photobucket.com/albums/bb240/auzivision/Melodeon/MiscSpring2013107_zps47e51417.jpg)

I really do not know much about this or melodeons in general.  My primary goal is learn how lightly restore and possibly play a little.  The wax between the reeds has deteriorated and some of the plates are fairly loose.  Whatever is achieved with reed wax, bellows tape, and cleaning will be satisfying enough.

Worst case it becomes a decoration in my office:

(http://i205.photobucket.com/albums/bb240/auzivision/Melodeon/MiscSpring2013111_zpsa8ce44e7.jpg)

Best case, it become a hobby and I buy a real Steirische.  I'm somewhat partial to Apline folk music.
Title: Re: Vienna Wonder one row purchased by a beginner
Post by: Auzivision on March 29, 2013, 04:18:51 PM
I would appreciate tips, link, and advice on the subject.  First up, remove old wax and prep for new:

(http://i205.photobucket.com/albums/bb240/auzivision/Melodeon/MiscSpring2013103_zps5f214474.jpg)

The old stuff is just crumbling at first touch.  What about the leather flaps being curled, I presume that's bad?

Perhaps there is a way to 'coach' these into lying flat.
Title: Re: Vienna Wonder one row purchased by a beginner
Post by: Lester on March 29, 2013, 04:32:16 PM
So you need to remove the pins (I throw them away as they fulfil no useful purpose). Take off the reeds making sure you know which one goes in which position. Scrape away the dead wax from the reeds and the casework. Take off the valves, throw them away.

Now you need to source new valves and proper reed wax, don't know where you are based in Uk we mostly use Charlie Marshall (http://www.cgmmusical.co.uk/index.html). Stick the valves on with impact adhesive, hen rewax the reeds, I use a soldering iron to melt the wax into place.

The problem is then the box will almost certainly need retuning.
Title: Re: Vienna Wonder one row purchased by a beginner
Post by: Graham Spencer on March 29, 2013, 05:35:55 PM
I use a soldering iron to melt the wax into place.

I agree with (almost!) everything Lester said; Charlie is a brilliant supplier and will send materials pretty well anywhere in the world (I'm in Cyprus and I order from him with no problems whatsoever). I use Charlie's "paintbrush" method http://www.youtube.com/watch?v=q7-MUhBc1ho (http://www.youtube.com/watch?v=q7-MUhBc1ho)for rewaxing and I find it works well for me (though I use an old briki (Greek coffee pot) rather than a tuna can!).

Best of luck
Graham
 
Title: Re: Vienna Wonder one row purchased by a beginner
Post by: Theo on March 29, 2013, 06:05:09 PM
I use a soldering iron to melt the wax into place.
I agree with (almost!) everything Lester said;

The soldering iron method has its pitfalls, the main one being that a simple soldering iron gets far too hot, and will easily damage the wax. The wax is also easier to control if it heated only just enough, and you will produce less fumes, which are harmful.  You really need a temperature controlled iron on its lowest setting.
Title: Re: Vienna Wonder one row purchased by a beginner
Post by: Lester on March 29, 2013, 06:08:45 PM
I use a soldering iron to melt the wax into place.
I agree with (almost!) everything Lester said;

The soldering iron method has its pitfalls, the main one being that a simple soldering iron gets far too hot, and will easily damage the wax. The wax is also easier to control if it heated only just enough, and you will produce less fumes, which are harmful.  You really need a temperature controlled iron on its lowest setting.

I use a lamp dimmer to reduce the temperature of the iron, maybe I should have made this clearer. As to Charlie's brush method could not get the hang of it and the need for a stove and a can of hot wax etc seem less convenient that using an iron. YMMV
Title: Re: Vienna Wonder one row purchased by a beginner
Post by: Graham Spencer on March 29, 2013, 06:43:27 PM
Tried both, prefer the paintbrush method (small controllable electric hotplate, heavy-bottomed container, job done). If you're happier with a soldering iron, fine - whatever melts your wax!  ;)

Graham
Title: Re: Vienna Wonder one row purchased by a beginner
Post by: rees on March 30, 2013, 01:44:42 AM
Just built a massive waxing booth with built in extractor fan. My reed technician is breathing easier now.
Seriously, if you are doing a large amount of waxing, watch those fumes!
Title: Re: Vienna Wonder one row purchased by a beginner
Post by: Lester on March 30, 2013, 08:00:43 AM
Just built a massive waxing booth with built in extractor fan. My reed technician is breathing easier now.
Seriously, if you are doing a large amount of waxing, watch those fumes!

Reed Technician - get you!   (:)
Title: Re: Vienna Wonder one row purchased by a beginner
Post by: Theo on March 30, 2013, 08:02:39 AM
He probably won't talk to us now Lester,  except through his press office.
Title: Re: Vienna Wonder one row purchased by a beginner
Post by: Nick Collis Bird on March 30, 2013, 08:46:08 AM
He probably won't talk to us now Lester,  except through his press office.

What sort of wax is it?
I can't believe fumes. Bring back hot melt , that's what I say. A serious question though.
Title: Re: Vienna Wonder one row purchased by a beginner
Post by: Lester on March 30, 2013, 08:49:21 AM
He probably won't talk to us now Lester,  except through his press office.

What sort of wax is it?
I can't believe fumes. Bring back hot melt , that's what I say. A serious question though.

A mixture of beeswax, rosin and olive oil. If I ever find you using hot melt to put reeds in I will, personally, get Rees' Reed Technician to kill you to death!  >:E

http://forum.melodeon.net/index.php/topic,4494.0.html (http://forum.melodeon.net/index.php/topic,4494.0.html)
Title: Re: Vienna Wonder one row purchased by a beginner
Post by: Theo on March 30, 2013, 09:11:44 AM
I can't believe fumes. Bring back hot melt , that's what I say. A serious question though.

The fumes from heated rosin are a potent cause of asthma.  I know from personal experience.   A friend who works in occupational medicine told me that it is the biggest cause of industrial related asthma, in the form of soldering fumes where rosin is used as a flux.
Title: Re: Vienna Wonder one row purchased by a beginner
Post by: malcolmbebb on March 30, 2013, 09:35:11 AM
For the likes of you and me, Nick, it's stuff we buy from Charlie Marshall. You might (and yes, I do think you might (:)  ) fancy having a go at making it but I think an economic amount to make would be far more than you'd ever use.

I will try to remember to bring some, if you like, next time I come round. I use Charlie's method (http://www.youtube.com/watch?v=q7-MUhBc1ho) at present.

As Theo points out, rosin fumes are taken extremely seriously and people who work with solder almost invariably have extractors and annual lung checks.

For reed waxing you really don't want it that hot but if working with small quantities it is very easy to over heat it. 
Title: Re: Vienna Wonder one row purchased by a beginner
Post by: Auzivision on April 04, 2013, 06:40:38 PM
Thanks for all the tips.  Ordered some wax online.  I think I'll use the side burner on my gas grill outside.  That should offer great lighting and plenty of ventilation.

Thought I give this reed leather trick a try with the hopes it will be good enough:

https://www.youtube.com/watch?v=NFrUKEeQ1UU

I'm not striving for perfect on this, just better than it is now.

Any tips of reed cleaning while I have them out would be greatly appreciated.  Also looking for sourcing on tuning 101 and recommendations on an app like Cleartune.

Finally, any comment on brand, manufacturer, approximate age would be interesting.

Title: Re: Vienna Wonder one row purchased by a beginner
Post by: Nick Collis Bird on April 08, 2013, 07:07:42 AM


A mixture of beeswax, rosin and olive oil. If I ever find you using hot melt to put reeds in I will, personally, get Rees' Reed Technician to kill you to death!  >:E



I wouldn't go anywhere near Rees sorry reeds Lester. I leave that to my Chelmsford reed technician .
Bellows yes, reeds no.
Thanks for the wax info. By the way, technicians don't frighten me matey :Ph
SimplePortal 2.3.5 © 2008-2012, SimplePortal