Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Harmonicatunes on April 03, 2013, 11:00:49 AM
-
Recently picked up a Hohner 1040 single row in C. Has the Pokerwork trim but a wooden keyboard, so I'm guessing 1950s.
Pretty clean all round, little wear. Air tight. Tuning OK(ish)
One problem. The high C (number nine button push) does not sound at all. I've yet to open up the box, that is my next step. Once I do, any ideas on how to get the note to sound?
-
Probably some dirt stuck in the reeds.
-
Open it up and ping the reeds, luckily your problem is with push reeds which are the ones you can see, insert a bit of shim (I also use my scalpel blade) under the reed and ping it. This should dislodge any grime/grit/hair etc which is stopping the reeds speaking.
Like Theo said who types faster than me (:)
-
Done as advised. All working now. Many thanks!