Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: waltzman on January 13, 2009, 08:43:35 PM

Title: liliput reeds
Post by: waltzman on January 13, 2009, 08:43:35 PM
Are the reed plates in a liliput normal size?
Title: Re: liliput reeds
Post by: an bosca ceoil on January 13, 2009, 08:55:44 PM
No
Title: Re: liliput reeds
Post by: an bosca ceoil on January 13, 2009, 09:09:16 PM
For example, just measured the low C/D on a Liliput at approx 38mm - "normal" one is approx. 43mm long
Title: Re: liliput reeds
Post by: Theo on January 13, 2009, 09:30:52 PM
The treble reedplates are also narrower than usual but the spacing between the reed tongues is the same.  I have successfully filed down the width of ordinary Hohner reedplates of the same age to make replacement Liliput reeds.  The result was good, the sound was the same.  It is a lot of work though, I would only want to do it for the occasional replacement.
SimplePortal 2.3.5 © 2008-2012, SimplePortal