Melodeon.net Forums
Discussions => General Discussion => Topic started by: hopey on January 14, 2009, 11:15:21 PM
-
Hello,
Is there such a thing as an instrument makers registry in the world of melodeons/accordions? I worked as at a piano shop for years and we had what we refered to as the 'piano Bible'.
I've searched the net for information on my instrument, and as yet I've found nothing. I'm thinking about changing the bellow gaskets.
If anyone can shed any light on this I'd be grateful.
Sonola Celtic 1. 23 keys 8 bass Serial number 287
Thanks
-
If anyone can shed any light on this I'd be grateful.
Sonola Celtic 1. 23 keys 8 bass Serial number 287 Thanks
One EBay listing says that it was a "trade name" of Guerrini in the '50's. But something in the back of my head says that it was taken as a "Sino-Italian" trade name over the past few years (could be very wrong, of course)
-
I have been trying to find a similar register myself and as of yet have turned up nothing. There is one book that deals primarily with chromatic accordions titled, "The Golden Age of the Accordion" that documents accordion manufacturing in the United States.
Anywho, the book only metions Sonola once and just states that Sonola was an Italian company that made the Sonola and Renelli brands.
Thats probably not much help is it?
Perhaps we need to get someone from the forum to learn Italian and head to Castlefidaro to sort these things out.
Cheers, Nathan
-
Sonola were indeed linked to Guerrini. I am told the Sonola branded instruments were aimed at the market for well built but unostentatious instruments. Bear in mind that, in the fifties when this started, most Italian accordions had more shiny bits than a tart's handbag.
My better half had a fine-sounding and utterly reliable sixties Sonola PA until recently (and we p/x'd it for a good value), which had replaced a previous stolen Sonola.
Never heard of or seen a Sonola melodeon, though.
-
Hopey, Sonola can be found from here as a brand name of Guerrini: http://www.accordionlinks.com/manufacturer.html
There must be many (DIY) topics about bellows gaskets here. You don't need to contact the factory because of that. Could be a long and expensive route to get one gasket, specially if they don't have them ready and available.
-
I'm thinking about changing the bellow gaskets.
Bellows gaskets are fairly standard. Old instruments often originally had gaskets made of soft leather, nowadays closed cell neoprene is the norm. It comes as a self adhesive strip that you fit and cut to length in place. Its not a difficult job, probably the main part of the task is removing all the old gasket material and glue. I have a couple of different thicknesses available, contact me by email if you want more details.
-
Just above this topic, (at the head of General Discussion) is a locked topic called Instrument Database Project which is designed for exactly what you are asking for. Unfortunately it hasn't won the hearts and minds of the members of the forum and remains more or less unpopulated. Myself and several others would dearly love to see this project prosper and flourish. As you and nousuvesi have both shown interest perhaps a new push would breath fresh life into the project and it could begin to grow towards it's full potential.
-
Just above this topic, (at the head of General Discussion) is a locked topic called Instrument Database Project which is designed for exactly what you are asking for. Unfortunately it hasn't won the hearts and minds of the members of the forum and remains more or less unpopulated. Myself and several others would dearly love to see this project prosper and flourish. As you and nousuvesi have both shown interest perhaps a new push would breath fresh life into the project and it could begin to grow towards it's full potential.
Martin,
I think the challenge for most of us is the Project appears to be buried in a mess of technical discussion on database coding techniques and the differentiators between minor variants of pre-war Hohners.
I have dived in from time to time as new posts caught my eye, however I think if the project is the win the hearts and minds and move forward, it needs to be formally launched to the forum. Tell us what's there, how to use it, why we should use it, what to add to it?
And how to report problems so that the hard working team that put it together can bring out the next version.
Hope that helps,
Andy
-
Followed the links, and found the page. I'm more than happy to add my melodeon to the list, but, being an absolute beginner I know very little about my, or any other melodeons.
I know how many buttons there are , the key it's in and the serial no. Beyond that I feel a bit stupid. I'm not sure what you would like me to do at this stage.
Of course I would love to help.
Thanks
-
As you and nousuvesi have both shown interest perhaps a new push would breath fresh life into the project and it could begin to grow towards it's full potential.
[/quote]
To the best of my ability I would love to help out with the instrument database project, however; I am uncertain what I can or what needs to be done. Please pass any thoughts on how I can help to me.
Back to Sonola briefly, as I understand it the Sonola brand was taken over by Guerini in the early 60s or late fifties. I the 1940s Sonola had a retail store in Chicago that was importing their accordions to the states and competing with the many American brands around at the time. I myself have also never seen a Sonola button accordion and was unaware until now they dabbled in such things.
Once I almost bought a Sonola piano accordion but decided against and went with a Hohner Corona instead, this is neither here nor there I guess.
Anywho..
Cheers,
Nathan
-
Thanks nousuvesi
The database is running and I hope Theo is going to launch it in some way and issue some operating instructions. Hope I'm not jumping the gun Theo, if there's anything I can do to help let me know.
Once you know how to populate the database you could enter the info you have given in this thread and then it will become part of the permanant reference for everyone in the future.
Also to Theo - once I know the 'how' details I will email manufacturers as I said I would earlier. Q Will they be allowed access to enter and/or correct details of their models as they will not necessarily be forum members ?
-
The instrument database is now live, linked via a page on the the main website.
As an anti-spam precaution you must request an account before you can add information. Contact details are on the main site.
-
Hi Theo
Have just gone to the database and find I need info on "sysops". If I were a non computer person I'd have no idea what these are or where I get them so I press the link and am faced with a blank email page. What I am supposed to say or do or enter etc. I'm playing Devil's advocate here but I do think it would increase usage if it were made simple and understandable in words of one syllable for non computer users.
My second Q is about the makers. I intend emailing them to update the database with their models. Faced with the current entry method I feel many may just abandon the idea. Can it be simplified or indeed automated in as much as the email I send automatically authorises their entry. (I'm not much of a computer man so please forgive ideas that may be unfeasible)
Thanks
-
Point taken about the wording, I'll go back and make improvements.
As for the makers I suppose we could set up accounts for each one. Then when you get a positive response and have an email contact we can send them their login details.
For the makers, how would you want the system simplified? Once logged in they just have to fill in a blank form for each model. I'll have to leave it for Bill or Guy to answer the questions about input by email.
How's that now? Any further suggestions welcome.
-
Faced with the current entry method I feel many may just abandon the idea. Can it be simplified or indeed automated in as much as the email I send automatically authorises their entry. (I'm not much of a computer man so please forgive ideas that may be unfeasible)
I assume by this you're still referring to the sign-up procedure?
Anyone with administrator permissions can set up a new user account, something that may be prompted by e-mail, p.m. or any other relevant request. So, if you're going to be contacting manufacturers directly and think that sign-up might be a problem in this particular case, then I guess the most straightforward course of action would be to make you a 'sysop' too. That way, you could deal with it simply and without any messing about, once you've got initial replies. PM me if you think this would be a better solution and I'll change your status accordingly.
Guy
-
One other idea that came to mind was the ability to add a sound clip for each melodeon. This is undoubtely possible but may be constrained by server space??
-
One other idea that came to mind was the ability to add a sound clip for each melodeon. This is undoubtely possible but may be constrained by server space??
If at all possible, it's better to add a YouTube link than to just include a recording. That way, you can see where the sound is coming from, rather than just take it on trust that the instrument is really what it's supposed to be. There are a couple of YouTube links included on the wiki already, so you can view those pages to see how it's done (it's easy...).
I doubt that Theo wants people to be uploading recordings onto hist server, but there's no reason why people shouldn't link to tracks hosted elsewhere. Maybe it's something to look into further.
-
One other idea that came to mind was the ability to add a sound clip for each melodeon. This is undoubtely possible but may be constrained by server space??
If at all possible, it's better to add a YouTube link than to just include a recording. That way, you can see where the sound is coming from, rather than just take it on trust that the instrument is really what it's supposed to be. There are a couple of YouTube links included on the wiki already, so you can view those pages to see how it's done (it's easy...).
I doubt that Theo wants people to be uploading recordings onto hist server, but there's no reason why people shouldn't link to tracks hosted elsewhere. Maybe it's something to look into further.
Much better idea, I bow to your superiority!
-
Hi Theo
Have just gone to the database and find I need info on "sysops". If I were a non computer person I'd have no idea what these are or where I get them so I press the link and am faced with a blank email page. What I am supposed to say or do or enter etc. I'm playing Devil's advocate here but I do think it would increase usage if it were made simple and understandable in words of one syllable for non computer users.
I'd appreciate some feedback on the changes I've made in response to your suggestions. I think it's now clearer, but I value your opinions, and I'm happy to make further alterations.
My second Q is about the makers. I intend emailing them to update the database with their models. Faced with the current entry method I feel many may just abandon the idea. Can it be simplified or indeed automated in as much as the email I send automatically authorises their entry. (I'm not much of a computer man so please forgive ideas that may be unfeasible)
Thanks
Have you taken up Guys suggestion that you become a wiki sysop so you can look after the manufacturers?
-
I've PM'd a reply Theo