Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: waltzman on January 15, 2009, 04:18:20 PM

Title: erika bellows
Post by: waltzman on January 15, 2009, 04:18:20 PM
I'm doing a complete overhaul on an old wooden erika club.  The bellows on it is in pretty good shape with no leaks but it is a very boring 'grocery bag paper' brown color.  Does any one have any suggestions about how to remedy this?  I assume it's a real PITA to replace the papers just for appearance. Has anyone tried coloring the paper with something?  Or gluing paper over the top of the existing paper? 
Title: Re: erika bellows
Post by: ACE on January 15, 2009, 09:56:47 PM
I made some concertina papers, which I designed with the paint program on the computor. Then multiplied the design to fill a sheet of A4 paper, printed them out, cut them up with scissors and glued them on the concertina with pva.

The first batch was too thick as I used a good quality paper to print on, but I used a cheaper thinner paper and it worked a treat. Some of these were over the top of some old papers that would not strip off.

I reckon you should be able to do the same on the melodeon. Instead of the normal bellows patterned papers I would be tempted to have a picture that showed when opened on the front of the box.
Title: Re: erika bellows
Post by: Quebecois on January 16, 2009, 12:51:04 AM
You can use acrylic ink to paint the bellows folds.
Title: Re: erika bellows
Post by: waltzman on January 16, 2009, 12:45:18 PM
You can use acrylic ink to paint the bellows folds.

I think I may give this a try. I wasn't sure what type 'paint' would work the best.
Title: Re: erika bellows
Post by: Theo on January 16, 2009, 01:57:26 PM
I would be reluctant to put any sort of paint on old, but otherwise sound bellows.  You risk making the bellows stiffer, paint soaking into the bellows may make the paper and car brittle leading to cracking.  The bellows are 70 years old and need to be treated with care.  You could replace the edging tape with a bright colour without compromising the bellows.  If you want bright and shiny why not get one of these:
Title: Re: erika bellows
Post by: waltzman on January 16, 2009, 02:11:00 PM
I would be reluctant to put any sort of paint on old, but otherwise sound bellows.  You risk making the bellows stiffer, paint soaking into the bellows may make the paper and car brittle leading to cracking.  The bellows are 70 years old and need to be treated with care.  You could replace the edging tape with a bright colour without compromising the bellows.  If you want bright and shiny why not get one of these:

Yes, well that's a bit more color than I was looking for.
Title: Re: erika bellows
Post by: Theo on January 16, 2009, 02:24:25 PM
But seriously you can get quite colourful with bellows tape, it comes in black, red, green, blue, white, gold, yellow, brown and two different textures. You can be creative with combining colours to make a design on the bellows.  The old tape usually comes off quite easily.
Title: Re: erika bellows
Post by: risto on January 16, 2009, 06:32:57 PM
Or gluing paper over the top of the existing paper? 

I can assure you, you may be getting stiffer bellows than you ever wanted. The thickness of the card board, material used on top: material/thickness of cloths, papers (even wall paper) and even the glue used, all are layers affecting the overall thickness. The overall thickness in turn is the dominating factor in how stiff the bellows eventually will be. Trust me, I've tried many combinations.

Edit: typos...
Title: Re: erika bellows
Post by: waltzman on January 16, 2009, 07:40:05 PM
Or gluing paper over the top of the existing paper? 

I can assure you, you may be getting stiffer bellows than you ever wanted. The thickness of the card board, material used on top: material/thickness of cloths, papers (even wall paper) and even the glue used, all are layers affecting the overall thickness. The overall thickness in turn is the dominating factor in how stiff the bellows eventually will be. Trust me, I've tried many combinations.

Edit: typos...

I thought this was probably a bad idea that's why I wanted to know if anyone had tried it.  Thanks for your feedback.
Title: Re: erika bellows
Post by: Quebecois on January 16, 2009, 10:54:20 PM
I would be reluctant to put any sort of paint on old, but otherwise sound bellows.  You risk making the bellows stiffer, paint soaking into the bellows may make the paper and car brittle leading to cracking. 

Acrylic ink is not like paint! It's a water-based ink.

But it is true that it's probably better to leave the card alone and use color bellows tape instead.
Title: Re: erika bellows
Post by: risto on January 17, 2009, 12:29:29 PM

But it is true that it's probably better to leave the card alone and use color bellows tape instead.


Safest, yes. There would be other problems as well. For instance, the very tip of the paper or cloth usually goes under the bellows corner. If you didn't remove the bellows corners you would have to be able to cut and glue the top material very precisely. But if we say you were able to strip the bellows to barebone ie. remove all the tapes, most of the top papers, glue remains, bellows corners, leaving only the card board and leathers, then why not, if you have all the equpment and suitable materials.

PS. "...if you have all the equpment... " The leathers and bellows top material are usually glued so that the bellows are streched wide open. If you glue them bellows not wide open the bellows will not open properly after the glue has dried. The device is simply an adjustable long bar, kept inside the bellows, with plates or "hooks" at both ends.
Title: Re: erika bellows
Post by: waltzman on January 17, 2009, 02:04:55 PM

But it is true that it's probably better to leave the card alone and use color bellows tape instead.


Safest, yes. There would be other problems as well. For instance, the very tip of the paper or cloth usually goes under the bellows corner. If you didn't remove the bellows corners you would have to be able to cut and glue the top material very precisely. But if we say you were able to strip the bellows to barebone ie. remove all the tapes, most of the top papers, glue remains, bellows corners, leaving only the card board and leathers, then why not, if you have all the equpment and suitable materials.

I'm finding myself becoming more and more fond of that original brown color.

PS. "...if you have all the equpment... " The leathers and bellows top material are usually glued so that the bellows are streched wide open. If you glue them bellows not wide open the bellows will not open properly after the glue has dried. The device is simply an adjustable long bar, kept inside the bellows, with plates or "hooks" at both ends.
SimplePortal 2.3.5 © 2008-2012, SimplePortal