Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: OwenG on January 16, 2009, 01:08:42 PM
-
Hi all,
Just wondering how easy it would be to tape up the thirds on a Hohner Club III? Is it as straightforward as taking the end off, working out which hole the third comes out of, and covering it with a piece of tape?
Also, what's the best tape to use? I'm not looking at making a permanent change, but would be interested in hearing what it would sound like without the thirds.
Cheers,
Owen
-
Just wondering how easy it would be to tape up the thirds on a Hohner Club III? Is it as straightforward as taking the end off, working out which hole the third comes out of, and covering it with a piece of tape?
Yep!
Well it's exactly what I did with my Tommy.
I found the easiest way was to
- take the bass blocks out
- operate the chord button to see what holes open
- work out which reeds that would sound
- work out which is the third (middle sized one :))
- stick (masking tape) tape over the block hole (chose the block hole rather than the sound board hole as the sound board hole had gasket material on it)
- reassemble melodeon
- Robert's your father's brother
-
That will work on an Italian instrument like a Tommy as the thirds are on the same plate push and pull.
I'm afraid it won't work on a Hohner as the thirds are on different plates.
Therefore you will have to tape the reed itself not the hole in the reed-block.
Masking tape works OK.
-
I made my polkawork into a single voice for a while. I cut up a crisp packet and trapped it under the reed block. Worked fine, left no residue and just took it out when I got bored. Salt and Vinegar, Cheese and onion, they all work well.
-
I guess it gave the single-voice Polkawork a particularly crisp sound :)
(I'll see myself out . . . )
-
Salt and Vinegar, Cheese and onion, they all work well.
How's about Cajun Squirrel (http://www.independent.co.uk/life-style/food-and-drink/news/is-cajun-squirrel-the-new-cheese-and-onion-1242591.html)... or does that only work on one rows?
Ye gods, what next... bbq gerbil I s'pose... ::)
Ed J
-
Just wondering how easy it would be to tape up the thirds on a Hohner Club III? .
Depends how notes of chords are shared with other chords in the Club model. In My Hohner Morgane voices (reeds, notes) are shared with other chords so that if you tape the third out of one chord you may taping out the root or fifth of another chord at the same time. Hope you have better luck.