Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Lin Leighton on January 19, 2009, 12:34:50 PM

Title: Helpful Hint ~Warning re screws
Post by: Lin Leighton on January 19, 2009, 12:34:50 PM
I bought a brand new Dinio Baffetti Black Pearl II from Music Room just a few weeks ago.  Whilst out playing for our traditional Boxing Day tour I discovered that the screw at the bottom of the cover on the trebel side had come off!!!

Handy Hint No 1 to you all  ..........  remember to check and tighten your screws regularly ( which I'm sure you all do anyway !!)

best wishes

Lin
Title: Re: Helpful Hint ~Warning re screws
Post by: Quebecois on January 19, 2009, 02:41:58 PM
Hmmm... I have seen lots of players with a screw loose...:)  not much to do about that though...
Title: Re: Helpful Hint ~Warning re screws
Post by: Lester on January 19, 2009, 05:52:52 PM
With my rather elderly Tommy I also underetake a regular button check as they tend to unscrew themselves and it's difficult to play if they fall of at the start of a set   :)
Title: Re: Helpful Hint ~Warning re screws
Post by: Quebecois on January 19, 2009, 08:20:59 PM
Ditto with my Morgane, also some button tops tend to come off!
Title: Re: Helpful Hint ~Warning re screws
Post by: Lin Leighton on January 23, 2009, 02:01:49 PM
weeelll I contacted Music Room, they said " if I dont hear from them by the middle of the week then assume they cant help" and guess what, I havent heard anything, and then they send me an email inviting me to come along to their one day exposition of all things squeezable including Dino Bafettis! how ironic is that!  ha ha

emmmmmmmmmmmm Theo, I dont spose you have a screw about your workshop that would be suitable , by any chance, do you???    ;)


Lin
Title: Re: Helpful Hint ~Warning re screws
Post by: finnhorse on January 23, 2009, 02:24:21 PM
Somewhat unrelated, but I twisted the head off one of my Pokerwork screws  ??? -- had a bastard of a time finding a replacement because the keyboard sockets are threaded for that particular part (I eventually located one).  Still waiting for either Hohner to offer accordion parts and service in the United States, or for the whole country to go on the metric system.  Looks like I'll be here for a while.  I understand they're "working on" a service contract with some dealers.

Right, well, if your screws come loose (no one's really interesting without a few loose ones anyway) then don't over-tighten them, either.  Too much torque can be a bad thing.   :)
Title: Re: Helpful Hint ~Warning re screws
Post by: Theo on January 23, 2009, 02:24:31 PM
Lin, I have lots of screws in my workshop, is it just a standard woodscrew? If you can send me a picture, I'll see if I have anything similar.  Is it one of these:
Title: Re: Helpful Hint ~Warning re screws
Post by: Theo on January 23, 2009, 02:27:45 PM
because the keyboard sockets are threaded for that particular part (I eventually located one).  Still waiting for either Hohner to offer accordion parts and service in the United States, or for the whole country to go on the metric system. 

They are just standard 3mm screws, widely available from specialist crew suppliers in Europe, though you might have to buy 100!  I supply them in smaller quantities.
Title: Re: Helpful Hint ~Warning re screws
Post by: Lin Leighton on January 23, 2009, 02:36:29 PM
Hi Theo
You have absolutely what the simple question "Can you send me a picture?" can do to a teminally-bad-at-techno-things person !!!  I think I could manage to send a picture in an email, but definately no idea how to post one on this forum.  the other problem is I am at work, not at home, just now so I cant even look at the box , but I will do so tonight and come back to you.

oh, and emmmmmmmm  ... I only want 1  ::)   ::)
Lin
Title: Re: Helpful Hint ~Warning re screws
Post by: finnhorse on January 23, 2009, 02:59:27 PM
because the keyboard sockets are threaded for that particular part (I eventually located one).  Still waiting for either Hohner to offer accordion parts and service in the United States, or for the whole country to go on the metric system. 

They are just standard 3mm screws, widely available from specialist crew suppliers in Europe, though you might have to buy 100!  I supply them in smaller quantities.

Oh I know which screw it is - and that was exactly where the problem arose.  You should have seen the looks I got from the Gomers down at the hardware store(s) in town when I asked for metric.  Each one took it upon himself to "inform" me that the United States is not on the metric system. 
Title: Re: Helpful Hint ~Warning re screws
Post by: Falseknight on January 23, 2009, 06:46:09 PM
Now perhaps you'll see the advantage of our benevolent colonial legacy - what could have been  ;D ;D ;D
Title: Re: Helpful Hint ~Warning re screws
Post by: Ebor_fiddler on January 23, 2009, 08:57:20 PM
Falseknight - wash your mouth out with soap and water!  ;) Metric is foreign, ie a metre is a French yard and a litre is a French quart. The Americans are wise to keep away from these evil influences - look how the dollar is going against the pound. It must have something to do with the evil EC spells having to cross running water from Europe or something ....  ???

Thinks (Quick - get back in scope). Yes, Hohner use metric ....
Title: Re: Helpful Hint ~Warning re screws
Post by: finnhorse on January 23, 2009, 09:35:24 PM
I swear out British pubs have bigger pints..

EDIT: to reflect that Americans usually call a "pint" a 16 oz. glass, slightly larger than a soda can.
Title: Re: Helpful Hint ~Warning re screws
Post by: Andy in Vermont on January 26, 2009, 11:55:08 AM
I swear out British pubs have bigger pints..

EDIT: to reflect that Americans usually call a "pint" a 16 oz. glass, slightly larger than a soda can.

FYI most American pubs will actually (and IMO scandalously!) serve you 14 oz. as a "pint."  About a month or two ago I heard an NPR story about someone who has been out there taking measurements! 
(I guess everyone needs a hobby.)
-Andy
Title: Re: Helpful Hint ~Warning re screws
Post by: BruceHenderson on January 26, 2009, 12:29:24 PM
  I swear out British pubs have bigger pints..   
EDIT: to reflect that Americans usually call a "pint" a 16 oz. glass, slightly larger than a soda can. 

   Yes, we use the old "wine gallon" for everything liquid.  It has a decided advantage in an economy that used to be highly agricultural in that "US liquid measurements" were the same as "dry measurements".  A "dry quart" of wheat seed would have been equivalent to a "quart" of machinery oil to a Kansas farmer in the old days.
   I think that the "wine gallon" isn't used or even legal since the standardization of the "Imperial System for Liquid Measurements" in the UK.  The Imp. gallon/quart/pint is based on the traditional "ale gallon" so it's certainly appropriate for use for beer these days.
   And, of course, there's the usual bit of disagreement about what a "fluid ounce" is, so 16 US fl. oz. is equivalent to about  17.4 UK fl. oz.
   It's a pity that the larger UK measurement doesn't mean that you get more.  When I was in the UK for MAW, I noticed that the usual "dollars for pounds" rule is still in effect -- a CD that's $15 is 15 UKP, a ball point pen ("biro") that's 99 cents is 99 pence, etc.  Must be something in the air ...  :(
Title: Re: Helpful Hint ~Warning re screws
Post by: Martin J on January 26, 2009, 02:29:29 PM
Hi Theo
 but definately no idea how to post one (picture) on this forum. 

Lin
Just below this box you type in is a +Additional Options...   Press this then browse for the pic you want (has to be somewhere on your computer) highlight the file name and it will appear just as Theo's srew pic did - magic
Title: Re: Helpful Hint ~Warning re screws
Post by: C age ing on January 26, 2009, 05:42:35 PM
Blame all this weight and measures stuff on the Victorians. Matching the massive Empire with an equivalent ego, they decided that the one hundred pound hundredweight was a bit wimpish so upped it to one hundred and twenty-eight, which handily was a nearer approximation for a metric tonne. The pint also rose to twenty fluid ounces. Recall with horror when the Radar company I worked for used both systems on their drawings. The problem was that the International Standards Organisation's mensuration standards only recognised kilometres and millimetres at the time, so the draftsmen complained that it took more time to stencil the measurements, than to actually draw even complex plans.
Be thankful though as Scandinavia and Russia used to use a temperature scale with 0 as freezing point and 80 as the boiling point of water, Reumar or something.
Bring back the Groat and the horrors of Whitworth, BSP, BSC, BSM, BSF, Gas, Unified and all the other threads.
Old Bill.
Title: Re: Helpful Hint ~Warning re screws
Post by: Bill the Farmer on January 26, 2009, 06:23:20 PM
I bought some Whitworth coach bolts on eBay the other day.  ;D
Title: Re: Helpful Hint ~Warning re screws
Post by: Martin J on January 26, 2009, 06:28:41 PM
Bring back the horrors of Whitworth, BSP, BSC, BSM, BSF, Gas, Unified and all the other threads.
Old Bill.
What with you and Bill, "I bought some Whitworth coach bolts on eBay the other day", this is becoming a wide ranging thread.  boom, boom
Title: Re: Helpful Hint ~Warning re screws
Post by: Theo on January 26, 2009, 06:56:38 PM
Blame all this weight and measures stuff on the Victorians. Matching the massive Empire with an equivalent ego, they decided that the one hundred pound hundredweight was a bit wimpish so upped it to one hundred and twenty-eight, which handily was a nearer approximation for a metric tonne.

When I went to school a stone was 14lb, a quarter (hundredweight) was 28lb and a hundredweight was 112lb.  Was that a new slimmed down 1950s hundredweight? :o
Title: Re: Helpful Hint ~Warning re screws
Post by: Quebecois on January 26, 2009, 07:35:54 PM
So much easier with metric... 1, 10, 100, 1000... :)
Title: Re: Helpful Hint ~Warning re screws
Post by: Stiamh on January 26, 2009, 09:04:02 PM
I thought Canada had gone metric until I came to Quebec. Imperial measurements... in French!

Soon after I got here I was working with someone and nearly fell over backwards when he said "Passe-moi ce boulon de six pouces" :)
Title: Re: Helpful Hint ~Warning re screws
Post by: Quebecois on January 26, 2009, 09:24:21 PM
I thought Canada had gone metric until I came to Quebec. Imperial measurements... in French!
Yep, the québécois are French-speaking British people, whether they like it or not :)

Les "clous de deux/trois/quatre/six pouces", les "deux par quatre", la "pinte de lait", le "gallon de peinture", la "livre de beurre"... the list goes on and on. Building materials are still sold using imperial sizes, but nuts and bolts, drill bits and screws are usually available in both metric and imperial.



Title: Re: Helpful Hint ~Warning re screws
Post by: Malcolm Austen on January 27, 2009, 09:09:33 AM
I would like to complain about the drift in this thread mind you the weather here was really foggy what was it like where you are.
Title: Re: Helpful Hint ~Warning re screws
Post by: Theo on January 27, 2009, 09:13:52 AM
So much easier with metric... 1, 10, 100, 1000... :)


Better that lbs, stones and cwt I agree, but would you really like hours or minutes divided into 100 parts?   Base 60 number system has so many advantages.   A third of an hour is an exact number of minutes, you can't do that with decimal. 

Thread drift - what's that ???
Title: Re: Helpful Hint ~Warning re screws
Post by: Mike Higgins on January 27, 2009, 09:25:09 AM
Can I point you towards the following
"An Essay Towards a Real Character and a Philosophical Language, the Right Reverend John Wilkins' 1668" where, by using a pendulum etc, he describes a universal mesurement that comes out at about 39 inches and a quarter.

Strange too that we in the UK use avoirdupois

Mumbling incoherently at this point.
Title: Re: Helpful Hint ~Warning re screws
Post by: C age ing on January 27, 2009, 11:05:33 AM
Fully agree on this thread creep, it must be stopped.
But what about rod, pole or perch? Perfect measurements, a quarter of a cricket pitch. A chain, ten cricket pitches. An acre, the area that a horse drawn plough can manage in a day. What does a hectare represent?
Back to Lin's problem. Can send a two inch diameter slug of iron, a cold chisel and lump hammer. With the aid of your gas oven and using your Tommy as an anvil and the bellows as makeshift vice, should be able to produce the missing screw in your Retford Manufactory. On the other hand, Theo might be able to supply one, or nick something from Dennis's train set.
Title: Re: Helpful Hint ~Warning re screws
Post by: Quebecois on January 27, 2009, 01:21:10 PM
Dare I mention, the king's foot? :(
Title: Re: Helpful Hint ~Warning re screws
Post by: Lin Leighton on January 28, 2009, 08:47:23 PM
much as I hate to interrupt a jolly good thread drift, but I thought you might like to know I have been successfully screwed by Theo   ;D

emmmmmmmmmmmmmm  what I mean is, ive received a screw from Theo - good all round egg -- so problem solved

Old Bill ..............  shame on you, you know jolly well I cant raid Dennis train set!!!

No Strings attached ............... thanks for the advice.  much appreciated.  however, having done as you said, and clicked post reply, an error message came up saying "cant attach files of this type""  ha ha it can only happen to me  It was only a photo from Whity 2006 with 1 or 2 other members of this forum, but i expect it was taken with the wrong camera (not the wrong trousers!!)

Thanks for all help and advice
Lin

Title: Re: Helpful Hint ~Warning re screws
Post by: Malcolm Austen on January 29, 2009, 09:16:01 AM
Fine attempt Lin to get this thread back on subject and it's good to know that Theo gave you one as the old joke would go and at last Old Bill and the rest of us have finished on this subject.

Now I think my favorite thread form, from my days in the apprentice training school, would have to be the American Buttress such an attractive little thread.
Title: Re: Helpful Hint ~Warning re screws
Post by: pipives on January 29, 2009, 11:17:36 AM


Thread drift - what's that ???


Is it like a snow Drift?  ::)
Title: Re: Helpful Hint ~Warning re screws
Post by: Theo on January 29, 2009, 11:30:13 AM


Thread drift - what's that ???


Is it like a snow Drift?  ::)

Sort of, but the most superior type of thread drift is when the thread drifts onto other types of thread, screw threads in this case.  Thread drift while making or using screw threads can be extremely serious.
Title: Re: Helpful Hint ~Warning re screws
Post by: Lin Leighton on January 31, 2009, 02:10:12 PM
and talking of snow drifts, Ive now got snow all over my face,  oops  I mean egg, cos guess what??

today a screw arrived entirely unannounced from Music Room, bless them, so I have to eat humble pie, and apologise profusely and say they are in my/our good books again (with an aside toTheo - dont worry about the credit crunch, I will still pay you for the screw!!!!!!)   :D
Lin
Title: Re: Helpful Hint ~Warning re screws
Post by: Scallyanglo on January 04, 2010, 06:32:03 PM
because the keyboard sockets are threaded for that particular part (I eventually located one).  Still waiting for either Hohner to offer accordion parts and service in the United States, or for the whole country to go on the metric system.  

They are just standard 3mm screws, widely available from specialist crew suppliers in Europe, though you might have to buy 100!  I supply them in smaller quantities.

Aha. To confirm, these are the same as shown below i.e. 40mm long with very fine thread?
Title: Re: Helpful Hint ~Warning re screws
Post by: melodeon on January 04, 2010, 07:34:58 PM
Don't forget Lord Neuffield  thread.

So how many stones does a Castagnari Handry 18 weigh ?

Or is stones reseved for humans only ?
Title: Re: Helpful Hint ~Warning re screws
Post by: Stiamh on January 04, 2010, 09:09:35 PM
Stone, Jeff, stone.

No final s. As in quid.

Also as in (knowing your fondness for biblical quotations), let him who is without sin cast the first....  >:E
Title: Re: Helpful Hint ~Warning re screws
Post by: Andrew Culwell on January 04, 2010, 10:19:48 PM
I thought Canada had gone metric until I came to Quebec. Imperial measurements... in French!
Yep, the québécois are French-speaking British people, whether they like it or not :)

Les "clous de deux/trois/quatre/six pouces", les "deux par quatre", la "pinte de lait", le "gallon de peinture", la "livre de beurre"... the list goes on and on. Building materials are still sold using imperial sizes, but nuts and bolts, drill bits and screws are usually available in both metric and imperial.




Funny I could swear you Quebecois were French speaking North Americans.
Title: Re: Helpful Hint ~Warning re screws
Post by: Owen Woods on January 04, 2010, 10:58:42 PM
Stone, Jeff, stone.

No final s. As in quid.

Also as in (knowing your fondness for biblical quotations), let him who is without sin cast the first....  >:E

The small font made me at first read that as "him who is without aim..." :P
Title: Re: Helpful Hint ~Warning re screws
Post by: Theo on January 04, 2010, 11:19:30 PM
because the keyboard sockets are threaded for that particular part (I eventually located one).  Still waiting for either Hohner to offer accordion parts and service in the United States, or for the whole country to go on the metric system.  

They are just standard 3mm screws, widely available from specialist crew suppliers in Europe, though you might have to buy 100!  I supply them in smaller quantities.

Aha. To confirm, these are the same as shown below i.e. 40mm long with very fine thread?

That could be the correct thread, but you can't be sure from a picture.  It needs to be an M3 thread. 
Title: Re: Helpful Hint ~Warning re screws
Post by: triskel on January 05, 2010, 12:19:11 AM
You should have seen the looks I got from the Gomers down at the hardware store(s) in town when I asked for metric.  Each one took it upon himself to "inform" me that the United States is not on the metric system. 

At least it is possible (if not easy) to get metric screws in the United States - you should try getting American standard screws in Europe!  :o

I've been known to spend time on my US "holidays" in hardware stores, purchasing screws and sets of taps & dies...  ::)
Title: Re: Helpful Hint ~Warning re screws
Post by: Keithypete. on January 05, 2010, 01:28:55 AM
You should have seen the looks I got from the Gomers down at the hardware store(s) in town when I asked for metric.  Each one took it upon himself to "inform" me that the United States is not on the metric system. 

At least it is possible (if not easy) to get metric screws in the United States - you should try getting American standard screws in Europe!  :o

I've been known to spend time on my US "holidays" in hardware stores, purchasing screws and sets of taps & dies...  ::)


Imagine my horror when having purchased a Harley Davidson discovering that I then needed a new set of spanners and sockets, thinking I wouldn't need my 'old' stuff now I no longer had a British bike.
  Where does a 'Standard British Handful' fit into the weights and measures act?
Title: Re: Helpful Hint ~Warning re screws
Post by: Ebor_fiddler on January 05, 2010, 11:05:20 AM
And how will your garage floor manage without its liberal lubrication from your British Bike? Triumphi regnent OKii !! ;D
Title: Re: Helpful Hint ~Warning re screws
Post by: Rob2Hook on January 05, 2010, 05:31:05 PM
A properly built Triumph only weeps a bit from the oush rod tubes - a Velocette leaves a trail like a snail.  We always used to say that if there isn't oil coming out of a Velo, you've run dry!

Rob (ex T90 & T100 - couldn't be bothered with twin carbs)
Title: Re: Helpful Hint ~Warning re screws
Post by: Chris Ryall on January 05, 2010, 08:48:57 PM
 Where does a 'Standard British Handful' fit into the weights and measures act?

Measurement is I understand considered rather ungentlemanly, although the word "weigh!" has defo been uttered in this context >:E Incidentally it is quite common to see beer in pints amongst Bretons tho I'm not sure how French this measure might be. And the dutch still ask for cheese at the kruideneer in "ounces"

PS  See below. They also serve beer in pints in the Mission Breton at Montparnasse inside Paris (14ème arrondissement)
Title: Re: Helpful Hint ~Warning re screws
Post by: Ebor_fiddler on January 05, 2010, 09:39:53 PM
It's the folk sheer bloodymindedness at having new measures thrust upon them by THEM (whatever nationality THEY may be). The measures shown as French Canadian are all pre-Revolutionary (No, not yours Elmer - the one your lot inspired, that we are still living with the fallout from!) as is the Breton pint-equivalent. They can all be found alive, if not well, not far outside Paris!  :|||:

Chris.


P.S. My darling keeps telling me off for translating modern prices to LSD! I can still do it in my head!  ;D

C.
SimplePortal 2.3.5 © 2008-2012, SimplePortal