Melodeon.net Forums
Discussions => General Discussion => Topic started by: Ebor_fiddler on January 21, 2009, 11:21:05 AM
-
AbcNavigator2 has ceased to play sounds on my Laptop. >:( No other sound software is silent. Has anobody else come across this problem please?
Chris ( :( )
-
AbcNavigator2 has ceased to play sounds on my Laptop. >:( No other sound software is silent. Has anobody else come across this problem please?
Chris ( :( )
Yes. AbcNavigator2 has a tendency to reset the MIDI sound volume to zero when it's closed down. Open the Volume Control panel (from taskbar or Control Panel, usually), and you may find the MIDI volume at zero. Slide it up, and all should be well.
-
Or click on Options - > Preferences, then on the MIDI tab.
Check the name shown as the MIDI Out device. With most generic sound cards it should show "Microsoft GS Wavetable SW Synth", unless you installed a specific sound card driver, which should then show in the drop-down list.
Also make sure there is a selected tune. Sometimes when opening the navigator, it shows "No Tune" in the green slider at the top of the screen, the one that shows the bar numbers as a tune plays.
-
Thanks everybody for your help. I've found what the problem was, though how it came about I haven't the slightest idea. I checked "Volume" and found that "SW Synth" slide had slipped to the bottom somehow. I put it up again and voila! Robert est ton oncle! ;D ;D ;D ;D ;D