Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: JJRobson on August 26, 2013, 09:16:16 PM

Title: Leaky Bellows
Post by: JJRobson on August 26, 2013, 09:16:16 PM
Evening all.

I'm learning melodeon on a Scarlatti DG and I've noticed that the bellows are leaking a fair bit which, as I'm progressing, is starting to get annoying! I've tried to find the exact spot that the air is escaping but so far I've had no luck. Could anyone offer any advice on how to pinpoint and fix an air leak? Or failing that, someone in the oxfordshire area who does box repairs?

Cheers!
Title: Re: Leaky Bellows
Post by: Lester on August 26, 2013, 09:30:41 PM
The chances are the leak, if it is a bellows leak, is from the gasket area where the bellows meet the casework. My usual method is to use an eyeball as a leak detector as it is very sensitive to air being blown on to its surface. Depending on where the leak is it may be matter of replacing bellows gasket or something more drastic if the leak is actually in the bellows. Alternatively the leak could elsewhere and difficult to diagnose by remote control.

If you have no success I can be found near Aylesbury in Bucks www.lesterbailey.org (http://www.lesterbailey.org)
Title: Re: Leaky Bellows
Post by: an bosca ceoil on August 26, 2013, 10:48:55 PM
What is your usual method for removing debris from the eyeball ;)
Title: Re: Leaky Bellows
Post by: Adam-T on August 27, 2013, 07:05:50 AM
LOL B - Hence why using the lips and are safer as leak detectors
Title: Re: Leaky Bellows
Post by: Malcolm Clapp on August 27, 2013, 10:17:17 AM
And if eyeballs and lips don't work, another option.....

Maybe only works with concertinas though....
Title: Re: Leaky Bellows
Post by: Theo on August 27, 2013, 10:42:59 AM
Getting back on topic...

Air leaks don't always mean a faulty bellows. Badly fitted pallets are the next place to suspect. Pallets that don't lie flat, or don't fully cover the air holes. Tiny cracks in glued joints, or missing screws are another possibility.
Title: Re: Leaky Bellows
Post by: pikey on August 27, 2013, 01:06:04 PM
Getting back on topic...

Air leaks don't always mean a faulty bellows. Badly fitted pallets are the next place to suspect. Pallets that don't lie flat, or don't fully cover the air holes. Tiny cracks in glued joints, or missing screws are another possibility.

I'd try a new gasket first, thats usually been the main source of my leaks.

If that doesnt work, sit in a quiet room, and push and pull the bellows together hard without playing any notes in pulses - you might be able to hear any escaping wind from any pallets.

To check for holes in bellows, take them off, and look from inside up to a bright light - you should be able to see any holes. If there are any, patch them from the inside with small bits of thin leather (or similar) and PVA glue, or if desperate use small strips of woven fabric tape (carpet tape is good).

Look inside the ends - are any of the strap screws protruding through the wood into the casing? a dab of PVA glue usually sorts that out.

Pikey
Title: Re: Leaky Bellows
Post by: Nick Collis Bird on August 27, 2013, 04:30:25 PM
And if eyeballs and lips don't work, another option.....

Maybe only works with concertinas though....

And I thought that I was the only one who used that method.  ;D
Back to topic.
THE SMOKE TEST.
This is used in the gas industry to test for leaks also for woodwind, electronics software etc.
It comes as a form of aerosol and is passive, eg that it won't gum up or rot anything.
  I've never used this method, but the idea is to remove one end, puff in the smoke, slap the end back on and gently squeeze and watch all those wonderful leaks.
It may be possible to inject the smoke through the air button, but as I've said I've never tried this.
Now where's that haystack and 'Tina  >:E
 
Title: Re: Leaky Bellows
Post by: Chris Ryall on August 27, 2013, 07:03:32 PM
thanks for that Nick  ::) presumably you have tried out the water bath method?  :P
Title: Re: Leaky Bellows
Post by: Nick Collis Bird on August 27, 2013, 07:13:34 PM
thanks for that Nick  ::) presumably you have tried out the water bath method?  :P

Only in the river Sid , and it didn't work.  ;)
On a serious  note, I don't see why the smoke idea shouldn't work, it's easily available from gas fitter suppliers or on line.
It's certainly used in woodwind manufacture for leak detection.
Title: Re: Leaky Bellows
Post by: Theo on August 28, 2013, 09:43:23 AM

On a serious  note, I don't see why the smoke idea shouldn't work, it's easily available from gas fitter suppliers or on line.
It's certainly used in woodwind manufacture for leak detection.

Interesting idea leading to a couple of questions:
Does the smoke persist inside for long enough to get all the bellows pins in, or would it need to be injected through a suitable aperture eg the last bellows pin hole?
Do you need a particularly good light to see the escaping smoke?
Title: Re: Leaky Bellows
Post by: Nick Collis Bird on August 28, 2013, 02:19:42 PM
In a word or three I don't know. But I imagine taking the end plate off exposing the air valve pallet and sucking it in from there.
  It must be easily visible as gas fitters use it for leak detection. I'm not sure about a light, maybe a box of matches, a candle?  >:E
Title: Re: Leaky Bellows
Post by: blafleur on August 28, 2013, 02:39:34 PM
On a serious  note, I don't see why the smoke idea shouldn't work, it's easily available from gas fitter suppliers or on line.
It's certainly used in woodwind manufacture for leak detection.

Is there any chance of corrosive effects on metal reeds?  The firefighter in me suspects any smoke of having particulates, most of which I'd be nervous about having on metal reeds.  Though, even if it was, maybe the small amount used would not make a difference.
Title: Re: Leaky Bellows
Post by: Theo on August 28, 2013, 03:06:16 PM
The smoke sources I was able to find on a quick search of plumbers suppliers are all based on burning something, either a special smoke match or a smoke pellet which is burned in a special spoon.  All very well with copper pipes, but they are not getting anywhere my workshop thank you very much. :o  To much inflammable stuff around.
Title: Re: Leaky Bellows
Post by: Nick Collis Bird on August 28, 2013, 03:33:13 PM
I thought it was completely passive, and can come in aerosol format. If it was "nasty" it wouldn't be used for Clarinets bassoons etc.  :-\
Title: Re: Leaky Bellows
Post by: an bosca ceoil on August 28, 2013, 04:32:40 PM
Smoke matches and pellets are used to test flue draught, not to find leaks.
The aerosol gas leak detection products are generally (fairy?) liquid.
I've seen cans of Irish fresh air for sale as souvenirs but not smoke in a tin, does it come with a genie?
Title: Re: Leaky Bellows
Post by: Nick Collis Bird on August 28, 2013, 04:52:02 PM
Ok I give up on this one. I have just read on Wiki.... Thingy that cigarette smoke was used in the 30's.
  I could have sworn that I've seen something (aerosol type, like WD40) that creates passive  smoke,
I can't see any reference to it now. Maybe it's an age thing. 'Twas just a thought.   ???
Title: Re: Leaky Bellows
Post by: Lester on August 28, 2013, 04:53:50 PM
Ok I give up on this one. I have just read on Wiki.... Thingy that cigarette smoke was used in the 30's.
  I could have sworn that I've seen something (aerosol type, like WD40) that creates passive  smoke,
I can't see any reference to it now. Maybe it's an age thing. 'Twas just a thought.   ???

Try harder (http://www.tlc-direct.co.uk/Products/TFFPA03.html)   ;)
Title: Re: Leaky Bellows
Post by: Nick Collis Bird on August 28, 2013, 05:26:48 PM
Wot blowing smoke?
Title: Re: Leaky Bellows
Post by: Andrew Wigglesworth on August 28, 2013, 05:33:54 PM
Getting back on topic...

Air leaks don't always mean a faulty bellows. Badly fitted pallets are the next place to suspect. Pallets that don't lie flat, or don't fully cover the air holes. Tiny cracks in glued joints, or missing screws are another possibility.

I'd try a new gasket first, thats usually been the main source of my leaks.

If that doesnt work, sit in a quiet room, and push and pull the bellows together hard without playing any notes in pulses - you might be able to hear any escaping wind from any pallets.

To check for holes in bellows, take them off, and look from inside up to a bright light - you should be able to see any holes. If there are any, patch them from the inside with small bits of thin leather (or similar) and PVA glue, or if desperate use small strips of woven fabric tape (carpet tape is good).

Look inside the ends - are any of the strap screws protruding through the wood into the casing? a dab of PVA glue usually sorts that out.

Pikey

I'd agree with changing the gasket. Dirt cheap and it won't do any harm and is likely to solve the problem. If it doesn't then more expensive procedures might be contemplated.
Title: Re: Leaky Bellows
Post by: an bosca ceoil on August 28, 2013, 05:40:51 PM
Would not spend that sort of money to test detectors, my missus can do it with a grille pan.
Says it only has 4 seconds visibilty anyway, so you would have to get the end back on pretty quick!
Don't rate the cigarette smoke idea now that I am into bronchoscopies but I suppose you could get away with using one of those e-cigs coupled up to the air button hole.
Not really convinced that any sort of smoke would remain visible emerging from all but the largest of openings.
Title: Re: Leaky Bellows
Post by: blafleur on August 28, 2013, 06:39:15 PM
One thing I do before installing reeds is get in a dark area with one end off the accordion and the bellows stretched out, and shine a bright light inside. It very well shows gaps from the outside.  This would still work after reeds are in for everything but the pallets.
Title: Re: Leaky Bellows
Post by: derekw on August 28, 2013, 06:59:01 PM
Nicks smoke detector?
http://www.smokepencil.com/
Title: Re: Leaky Bellows
Post by: an bosca ceoil on August 28, 2013, 07:04:20 PM
I made a stretcher thing(umy)jig with a lampholder attached to one end - ideal for finding pinholes in gusset diamonds but I think a gasket leak would need to be pretty drastic before light would shine through.
Title: Re: Leaky Bellows
Post by: an bosca ceoil on August 28, 2013, 07:12:56 PM
Nicks smoke detector?
http://www.smokepencil.com/

All joking apart, that mixture of glycol glycerine and water is the same stuff they use in e-cigs!
Title: Re: Leaky Bellows
Post by: Nick Collis Bird on August 28, 2013, 10:15:15 PM
Nicks smoke detector?
http://www.smokepencil.com/

All joking apart, that mixture of glycol glycerine and water is the same stuff they use in e-cigs!

I think you're right, but that sort of mixture must be gummy for reeds, terrible.
Anyway, the whole thing was only a suggestion.  ;D
SimplePortal 2.3.5 © 2008-2012, SimplePortal