Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: boxlad on January 28, 2009, 10:54:07 AM

Title: Timber Keybaord
Post by: boxlad on January 28, 2009, 10:54:07 AM
Anyon know where I might get a timber keyboard for an old one row hohner I am repairing. The one it has is destroyed and it needs to be replaced..  :-[
Thanks
Title: Re: Timber Keybaord
Post by: Malcolm Austen on January 28, 2009, 12:11:10 PM
unless Theo or Rees jumps in with one soon you could try Pete Grassby
here (http://www.melodeon.freeserve.co.uk/) he often has old hohner parts.
Title: Re: Timber Keybaord
Post by: Theo on January 28, 2009, 12:20:57 PM
I can supply you with a plastic fingerboard, not a wood one I'm sorry to say.  They are quite fragile, and tend to split between the button holes.  It is often possible to graft in a new piece of wood and re-cut the holes.  They are worth saving because they are a bit less noisy than the plastic ones.
Title: Re: Timber Keybaord
Post by: Lester on January 28, 2009, 12:30:20 PM
This looks interesting and appears to cover the key travel problem as well.

About halfway down on the right (http://www.irishdancemaster.com/reedtuning.html)
Title: Re: Timber Keybaord
Post by: TomB-R on January 28, 2009, 01:59:27 PM
Build from scratch? I did one not long ago for a Double-Ray I bought on Ebay. The "keyboard" was missing and the keys and buttons were sticking up like a row of daisies!

Even with very basic tools no big issue to fabricate from light timber and ply.  A forstner bit would be nice for cutting the "button-holes."
Title: Re: Timber Keybaord
Post by: Malcolm Austen on January 28, 2009, 03:15:44 PM
Build from scratch? I did one not long ago for a Double-Ray I bought on Ebay. The "keyboard" was missing and the keys and buttons were sticking up like a row of daisies!

Even with very basic tools no big issue to fabricate from light timber and ply.  A forstner bit would be nice for cutting the "button-holes."

any chance of a photo it would be interesting to see the end result
Title: Re: Timber Keybaord
Post by: finnhorse on January 28, 2009, 04:14:05 PM
This looks interesting and appears to cover the key travel problem as well.

About halfway down on the right (http://www.irishdancemaster.com/reedtuning.html)

I saw that on his site a while back but I couldn't figure why it said 'professional installation recommended'  ???
Title: Re: Timber Keybaord
Post by: EeeJay on January 28, 2009, 04:35:26 PM
This looks interesting and appears to cover the key travel problem as well.

About halfway down on the right (http://www.irishdancemaster.com/reedtuning.html)

I saw that on his site a while back but I couldn't figure why it said 'professional installation recommended'  ???

From what I gather - and after e-mailing Michael Usui about these - it's down to the sound projection. Once you begin to minimise the key travel, it reduces the lift of the palettes, and can muffle the sound a fair bit. There are ways to alleviate this, by enlarging/reshaping/reprofiling the holes in the soundboard. And this is what you get as part of the professional installation.

However, Michael's happy enough to supply the keyboards seperately. So long as you understand that one solution can cause another problem...

Ed J
SimplePortal 2.3.5 © 2008-2012, SimplePortal