Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Ebor_fiddler on January 28, 2009, 08:37:17 PM

Title: Plastic Keybaord
Post by: Ebor_fiddler on January 28, 2009, 08:37:17 PM
 ;D !! My One row Pokerwork has the plastic keyboard which I intend to reuse when I have rebuilt the thing. It has however a hole broken in it which covers two button holes. What I should like to do is to fill in the hole completely and redrill the holes. I was thinking of using either Tetrion filler (or a modern equivalent) or fibreglass. Has anybody done this please? Is it practical?

Thanks,

Chris
Title: Re: Plastic Keybaord
Post by: Martyn on January 29, 2009, 11:18:50 AM
;D !! My One row Pokerwork has the plastic keyboard which I intend to reuse when I have rebuilt the thing. It has however a hole broken in it which covers two button holes. What I should like to do is to fill in the hole completely and redrill the holes. I was thinking of using either Tetrion filler (or a modern equivalent) or fibreglass. Has anybody done this please? Is it practical?

Thanks,

Chris
The only type of filler that might work is a two pack car body type filler.
Personally though I wouldn't bother, I'd have a word with that kind Mr. Gibb to see if he could supply a new one. :)

Martyn
SimplePortal 2.3.5 © 2008-2012, SimplePortal