Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Harmonicatunes on September 29, 2013, 04:08:01 AM

Title: Case and basic mods for Bb/Eb Erika
Post by: Harmonicatunes on September 29, 2013, 04:08:01 AM
I recently picked up a 1930's Bb/Eb Erika on Melnet

The sound and feel of the instrument is wonderful. Not particularly loud, so perfect for around the house. The tuning is pretty good. I'm not sure if its been worked on, perhaps not. The bellows are reasonably airtight. It has a tobacco smell to it, which is going away the more I play it. I suspect the air being pushed through eliminates the odour over time.

I may get it serviced down the track. In the meantime:

- what soft case should I get. I have one of Theo's excellent 2915 soft cases, but the Erika is too big for it

- I'd like to limit the treble key action. I'm familiar with the strip of wood under the key levers approach, and have done this for other instruments. However, given the extra helper row keys, I'm not confident of sawing that many slots accurately. Apparently felt is another option. Are there any photo guides for key action limiting with felt?
Title: Re: Case and basic mods for Bb/Eb Erika
Post by: penn on September 29, 2013, 10:15:14 AM
I did this recently on my Erika. I just slipped a piece of 4mm felt under the keys. I had to cut it slightly to shape and to avoid some posts that hold the keyboard face up. The erika keyboard comes off very easily (mine was sort of dangling off already as it happened.) I got the felt off ebay, although Theo had suggested using felt from an old piano. It stopped a lot of clacking on the right side to the point where I feel I can put off the pallet re-facing for a bit. Although in my case the tuning is biggest problem, it can't be played in public.
Steve
SimplePortal 2.3.5 © 2008-2012, SimplePortal