Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: forrest on October 25, 2013, 08:08:33 PM
-
Getting set to place an order with CGM for some parts, and was noticing the nice selection of bass str@ps. I would like to make the str@p on my pre-Corona adjustable, but not sure I want to experiment with the hardware (the recessed knurled-nut, volume control variety). I have had that setup on one other box, and it was great, but it was factory installed. Not sure I want to perform the surgery. Up to now, I have been using a plain leather str@p with an automotive seat-belt pad for comfort. The velcro model looks like a great idea. Anyone out there use one of these? Would appreciate any comments pro or con. Best regards, .....Forrest
Edited to eliminate a 'forbidden' word
-
Bought one for my Liliput, but it's not fitted yet - project has been on the back burner for a while. But it looks promising ;D
-
They work very well.
-
I have one on my Hohner Double Ray. The adjustment and comfort are fine, but the strap is appreciably thicker than the simple one, so the standard feet are too short. It really needs new, longer ones. Maybe someday; meanwhile it wobbles a bit when set down.
-
I got one from CGM and it's very smart and effective, but I can see that getting the wrong length could be a problem, mine is only just right.
Suggest you phone and have a chat about the length.
-
I have put them on a couple of old Hohners. They work very well.
Martin
-
I've put them on both a pokerwork and a pressed wood and they work really well. Adjustable and comfortable!
And easy to fit!
-
Make sure you get the Italian style end caps to go with them, makes a neater and stronger job.
-
I've put them on both a pokerwork and a pressed wood and they work really well. Adjustable and comfortable!
And easy to fit!
Do you remember what length you bought?
-
Measure the length of the old strap, get new one the same.
-
I have a thing about which way up these straps should be mounted. I strongly believe the metal loop bit should be on the chin end of the box so that the strap loops downwards. This because the open end of the strap will then point down and be less likely to get caught on stuff and become undone.
Castagnari seem to disagree with me :o
-
I will say a prayer for them tonight ;)
-
I prefer them the other way up because the free end is easier to reach with your right hand when making adjustments.
-
Had one on a Lilly and thought it was great, as Theo says easy to adjust if the right way up. I never caught it on anything and I'm notorious for my cavalier attitude to my boxes. Only problem for the small Hohners is that there isn't a strap narrow enough to fit. Perhaps one day I'll find some suitable leather to make one...
Rob.
-
Only problem for the small Hohners is that there isn't a strap narrow enough to fit. Perhaps one day I'll find some suitable leather to make one...
Rob.
I have one on my Liliput and it's only a little wider than the original where it fastens to the body, the padded bit in the middle is a little wider though but it's not a problem. Like Bill Young my only problem is that the feet are way too short for the thickness of the strap so I have to leave it in an open bag for support.
(http://i279.photobucket.com/albums/kk137/p_m_dunk/Liliput/Liliput2.jpg) (http://s279.photobucket.com/user/p_m_dunk/media/Liliput/Liliput2.jpg.html)
-
Ah, I see the Liliput has an external fastening for the strap. On the Preciosa, it is let in through the case and offset from centre - only 25mm wide. I'll have to either trim the ends of a commercial one or adapt a belt.
Rob.
-
The straps are not difficult to make if you learn how to do leather stitching.
-
The straps are not difficult to make if you learn how to do leather stitching.
@ Theo: I understand there are some courses available where one can also make their own melodeon as well! ;D I certainly will get the end-plates, though. And I will put the strap on right way 'round! (aside): why won't the post work using the word 'strap'? Does this word have a derogatory connotation in the UK?
@ tallship: Thanks for the photo! A bit more descriptive than Charlie's.
@ all: Very grateful for the comments....I am definitely ordering one of these. Best wishes, Forrest