Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Rog on November 27, 2013, 10:13:17 AM

Title: Custom made springs
Post by: Rog on November 27, 2013, 10:13:17 AM
I need to make some custom sized springs for an ancient keyboard.
What gauge of spring wire (piano?) is best and where can I get some in the UK?
I've seen the vid from the Pigini factory where they make springs... any tips for making your own?
Title: Re: Custom made springs
Post by: Theo on November 27, 2013, 10:28:50 AM
It's not too difficult to make your own springs, but it is even easier to buy ready made ones that are close to what you need and then bend and trim the legs to what you need.
Spring gauges vary between .4mm up to .8mm. Sometimes different gauges are used for different rows on the same instrument. The first step is to measure the spring wire used in your instrument or a similar one. If you can't do that then you will need to do some experimenting.
Title: Re: Custom made springs
Post by: Rog on November 27, 2013, 10:48:20 AM
Thanks Theo. And I guess the springs come from CGM? or do you source yours from somewhere else?
Title: Re: Custom made springs
Post by: Theo on November 27, 2013, 10:53:09 AM
CGM is your best source
SimplePortal 2.3.5 © 2008-2012, SimplePortal