Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Theo on February 15, 2009, 11:26:05 AM

Title: Saltarelle resurrection!
Post by: Theo on February 15, 2009, 11:26:05 AM
I've recently started a rebuild of the most beat-up Saltaralle I've ever seen.  I'm documenting the process with photos here (http://www.facebook.com/album.php?aid=61330&id=709188166&l=c2213), and here (http://www.facebook.com/album.php?aid=65416&id=709188166&l=7bbf1)


Here is a taster:
(http://img.photobucket.com/albums/v464/Theo/Saltarelle%20rebuild/004.jpg)
and some gory detail:
(http://img.photobucket.com/albums/v464/Theo/Saltarelle%20rebuild/007.jpg)

edited to link to facebook gallery with a public link, its a bit easier to use, and if you use facebook you can leave questions/comments about individual pictures.
Title: Re: Saltarelle resurrection!
Post by: Pete Dunk on February 15, 2009, 12:22:57 PM
Excellent stuff Theo, all you'll need to do when you get to the end of the restoration is add the documentary text and send it off to the publishers and you'll have created the Melodeon Maintenance Manual ...

Put me down for a copy.  ;D

Pete.
Title: Re: Saltarelle resurrection!
Post by: Quebecois on February 15, 2009, 01:27:29 PM
Wow, quite a challenge, but I am sure she is fine in your capable hands and you will pull out another chef-d'oeuvre of restoration and craftmanship. I look forward to see the subsequent pictures and work!
Title: Re: Saltarelle resurrection!
Post by: Theo on February 16, 2009, 11:08:49 PM
Just added a few more photos showing how I repaired oversized holes for bellows pins.
Title: Re: Saltarelle resurrection!
Post by: finnhorse on February 16, 2009, 11:40:33 PM
There should be more of this in magazines.  Great photos, but yikes - was this thing sitting at the bottom of a canal for ten years? 

I'm curious, did you use a power sander for rounding off the new dovetails, or just a flat file to chew off the edge and sandpaper to smooth into a curve?
Title: Re: Saltarelle resurrection!
Post by: Theo on February 17, 2009, 10:00:39 AM
I did it all with a sanding block.  Very coarse to remove the bulk, then finer grades to finish.  It is all softwood so was quite quick doing it by hand.
Title: Re: Saltarelle resurrection!
Post by: Skipy on February 17, 2009, 12:39:58 PM
This is fascinating...... Well done Theo and thanks for sharing this with us!

Video the next renovation and I reckon you'll have the Discovery Channel knocking on the door  ;D
Title: Re: Saltarelle resurrection!
Post by: pipives on February 17, 2009, 02:27:56 PM
I'm finding this thread VERY interesting. Will be a great box for someone once again when all the hard work is finished.
Title: Re: Saltarelle resurrection!
Post by: Matthew B on February 17, 2009, 07:38:32 PM
Theo, would you or the customer care to share the story of this instrument with us?  How in earth did it get such a beating?  It seems to be the mirror image of an Annie Proulx tale.

Title: Re: Saltarelle resurrection!
Post by: Theo on February 17, 2009, 07:45:44 PM
I don't know how it got into this state, but the current owner is a member here so I'll leave it to him to fill in any more details.
Title: Re: Saltarelle resurrection!
Post by: rees on February 17, 2009, 08:25:06 PM
I know the original owner. He's a very nice chap from the South west of England. Brilliant player with a crazy style, into playing all kinds of rock and roll, etc. as well as folk music on the melodeon.
A few years ago he painted that Saltarelle bright red then after another few years scraped the paint off. He likes tinkering around inside too.

He also owns a bright green Gabbanelli and a shiny new Hohner Corona IIIN Xtreme amongst others.
I know the Saltarelle has had a hard life but that's how he plays - hard and fast. Good man himself.

I was offered the option to buy it, but somehow I'm glad Theo's got the job.  ;)
Title: Re: Saltarelle resurrection!
Post by: Matthew B on February 18, 2009, 03:13:19 PM
Brilliant player with a crazy style, into playing all kinds of rock and roll, etc. as well as folk music on the melodeon.
A few years ago he painted that Saltarelle bright red then after another few years scraped the paint off. He likes tinkering around inside too.

Even the bare bones of it make a good tale: I'd love to hear the music that made the box look that way!
Title: Re: Saltarelle resurrection!
Post by: Pete Dunk on February 18, 2009, 09:22:34 PM
Video the next renovation and I reckon you'll have the Discovery Channel knocking on the door  ;D

Now there's a thought Theo. I have a video camera and editing software, I could take a holiday Oop North...  ;D
Title: Re: Saltarelle resurrection!
Post by: Allan Smith on February 19, 2009, 08:51:20 AM
Looking at the picture of Theos project reminded me of something that might come in useful. I used to remove dents or bruises in wooden gun stocks by carefully removing any surface finish & carefully soaking the dented area with water. When it's good & damp you apply a hot iron ( I used to use a flat iron, but an electric will work ) on top of brown paper to the area. As it get good & hot it produces steam which inflates the cells in the wood to their original size. If it doesn't work the first time the process can be repeated ad nauseam. As long as there are no fibres broken it's often impossible to see where the dent was, especially when the wood is re-finished.

However APPROACH WITH CAUTION ! Practice on a piece of scrap first & I'm taking no responsibility if your box goes up in flames.

Happy steaming

Smith
Title: Re: Saltarelle resurrection!
Post by: Theo on February 21, 2009, 12:38:50 PM
Thanks for that tip Allan.  Now you mention it I have read or that method in a book on restoring antique furniture.  I'v used the method on some of the dents and they are now much flatter.  More photos to follow soon.
Title: Re: Saltarelle resurrection!
Post by: danleighton on February 21, 2009, 09:52:44 PM
Hi Everyone

Thanks Rees, it's great to hear a little more about the box's life.  Funnily enough, I got the details from the previous owner's advert from your website.  It's lucky I like characterful isn't it!   ;D

I felt very virtuous on the day I received it through the post from the previous owner.  I played it for about 20 minutes or so - including a demonstration to my pupils in my I.T. class at the secondary school where I teach - and then packaged it straight back up and sent it up to Theo with a list about 25 items long of things I imagined needed doing.  He is so tolerant he even read through them.  I think the last item I added was, "take an egg, make two holes and suck don't blow" ;)  The man is truly a God as he resurrects the dead (I fully expect to find a rib inside the box somewhere once I receive it back.)

I must record my thanks to Theo here as well.  I asked him off-hand if he would happen to be able to take a few photos of the restoration and he came up trumps.  It has really made me feel part of the process and appreciate quite how much has gone into the instrument.  Cheers Theo!

Title: Re: Saltarelle resurrection!
Post by: melodeon on February 22, 2009, 01:34:59 AM
Good luck Theo

Looks like a Serenellini built unit  and not a Baffetti
Title: Re: Saltarelle resurrection!
Post by: Theo on February 22, 2009, 01:57:26 PM
More pics added showing Allan's steaming method used to remove the worst of the dents and dings.
Title: Re: Saltarelle resurrection!
Post by: danleighton on February 23, 2009, 03:41:07 PM
I'm interested to know about who made the box.

What kind of differences are there between the Serinellini and Baffeti construction?

Are their qualitative differences?

d.
Title: Re: Saltarelle resurrection!
Post by: Allan Smith on February 24, 2009, 06:31:37 AM
More pics added showing Allan's steaming method used to remove the worst of the dents and dings.
Theo,

Glad it's worked for you, I always found the process almost magical.

Now, if only it would work on the wrinkles on my face........................

Smith
Title: Re: Saltarelle resurrection!
Post by: Theo on February 25, 2009, 11:58:11 PM
more pics added of treble re-assembly
Title: Re: Saltarelle resurrection!
Post by: Theo on March 07, 2009, 09:04:02 AM
Last few pictures added here (http://www.facebook.com/album.php?aid=65416&id=709188166&l=7bbf1)

Title: Re: Saltarelle resurrection!
Post by: danleighton on March 07, 2009, 12:39:34 PM
You know, it's actually quite excruciating waiting for the photos!

I can see the box, I can see the progress...but I can't play it yet  :-[

I don't want to ring up and ask Theo how it's going as the poor man is busy enough as it is!

Only a few more days - and I shall tell you all how I get on with it  :|||:

!
Title: Re: Saltarelle resurrection!
Post by: danleighton on March 07, 2009, 06:03:29 PM
Woo hoo!  It's finished!

Just waiting for Postman Pat to knock on the door and deliver it.

Theo has posted the last few photos now.  It looks great.  Like Sean Connery.  Lived in but vaguely walnut coloured and rather smoother than might be expected.

;-)

d.
Title: Re: Saltarelle resurrection!
Post by: Pete Dunk on March 07, 2009, 08:15:39 PM
Looks like it should be good fun Dan, let us know how you get on. The photographic insight was intriguing to say the least; I wonder if Theo used new galvanized fencing wire or recycled coat hangers for the bass end push rods...

Pete.  :D
Title: Re: Saltarelle resurrection!
Post by: Theo on March 07, 2009, 08:21:42 PM
I wonder if Theo used new galvanized fencing wire or recycled coat hangers for the bass end push rods...

Pete.  :D

Certainly not!  I used genuine Italian wire from my parts supplier in Italy.  Its soft steel with a zinc coating.
Title: Re: Saltarelle resurrection!
Post by: BruceHenderson on March 07, 2009, 09:06:46 PM
 
I wonder if Theo used new galvanized fencing wire or recycled coat hangers for the bass end push rods...  Pete.  :D 

Certainly not!  I used genuine Italian wire from my parts supplier in Italy.  Its soft steel with a zinc coating. 

  That's interesting, Theo.  I was looking at the photos and thinking "how does he find a wire that's maleable enough to make those hooks and bends but is still stiff enough to not flex while it's being played".  Now we know!  I'm guessing that the fairly large diameter of the wire helps with the stiffness.
Title: Re: Saltarelle resurrection!
Post by: Skipy on March 08, 2009, 10:41:10 AM
I wonder if Theo used new galvanized fencing wire or recycled coat hangers for the bass end push rods...

Pete.  :D

Certainly not!  I used genuine Italian wire from my parts supplier in Italy.  Its soft steel with a zinc coating.

Oh Theo, I can just picture the disgruntled look on your face when you read Pete's comment!  ;D

Many Thanks again for sharing this project, it's been fascinating!

Three Cheers for Theo.................. again.

Skipy

 
Title: Re: Saltarelle resurrection!
Post by: Pete Dunk on March 08, 2009, 10:14:56 PM
Oh Theo, I can just picture the disgruntled look on your face when you read Pete's comment!  ;D

Oh dear! My comments weren't meant to be insulting.  ??? To me a piece of galvanized (zinc coated) steel wire is simply that. Do the Italians really produce something totally divorced from other wire products specifically designed for use in accordions?
Title: Re: Saltarelle resurrection!
Post by: Theo on March 09, 2009, 08:46:06 AM
Absolutely no offence taken Pete.  I can improvise repair materials with the best of them.  The wire for the bass mechanism needs to have the right properties and the right diameter.  The Italian made wire is nice and soft, so it can be bent in situ without having to use large forces that might damage other parts.  Fence wire is usually tougher and stiffer because it has to be strong so it can resist heavy animals leaning against it, and humans climbing on it.  Wire coathangers are very useful, but all the ones in our house now seem to be plastic.  I've probably used all the wire ones as welding filler!
Title: Re: Saltarelle resurrection!
Post by: IanD on March 10, 2009, 11:27:28 AM
Absolutely no offence taken Pete.  I can improvise repair materials with the best of them.  The wire for the bass mechanism needs to have the right properties and the right diameter.  The Italian made wire is nice and soft, so it can be bent in situ without having to use large forces that might damage other parts.  Fence wire is usually tougher and stiffer because it has to be strong so it can resist heavy animals leaning against it, and humans climbing on it.  Wire coathangers are very useful, but all the ones in our house now seem to be plastic.  I've probably used all the wire ones as welding filler!


All my wire coathangers got used up over the years for fastening the various dangly bits of a pig (legs etc, not *those* bits) onto a spit when roasting it...

Ian
Title: Re: Saltarelle resurrection!
Post by: Matthew B on March 10, 2009, 03:18:08 PM
All my wire coathangers got used up over the years for fastening the various dangly bits of a pig (legs etc, not *those* bits) onto a spit when roasting it...

In the interests of thread drift . . .

Must've been a very big pig.  How long did it take to cook?
Title: Re: Saltarelle resurrection!
Post by: IanD on March 10, 2009, 04:44:20 PM
All my wire coathangers got used up over the years for fastening the various dangly bits of a pig (legs etc, not *those* bits) onto a spit when roasting it...

In the interests of thread drift . . .

Must've been a very big pig.  How long did it take to cook?

Usually 5-6 hours, depending on the weather, how hot the fire is and how on-the-ball (i.e. sober) the cooks are...

Ian

P.S. Yes that *is* Nick Walden's bottom...
Title: Re: Saltarelle resurrection!
Post by: Stiamh on March 24, 2009, 05:52:48 PM
Hey Theo,

When I follow the Facebook links now I get the following message (Content not found):
Quote from: Facebook
This content is currently unavailable

This public photo link has expired. To see these photos, please ask the owner to generate a new public link.

Would you mind? I wanted to send the links to my repairman who expressed an interest.
Title: Re: Saltarelle resurrection!
Post by: Theo on March 24, 2009, 05:56:33 PM
Here are the links again.  I wasn't aware that they were time limited.   I shall have to look for another home for them I think.  I probably need to add a photo gallery to my website.

Part 1 (http://www.facebook.com/album.php?aid=61330&id=709188166&l=c221326df9)
Part 2 (http://www.facebook.com/album.php?aid=65416&id=709188166&l=7bbf1787fe)
Title: Re: Saltarelle resurrection!
Post by: Stiamh on March 24, 2009, 07:36:05 PM
Thank you!
Title: Re: Saltarelle resurrection!
Post by: Owen Woods on March 24, 2009, 11:45:44 PM
A very interesting set of pictures Theo, I hadn't seen them before. Now I just have to resist the temptation to take my melodeon completely to pieces or to buy a cheapo off ebay to experiment with...
Title: Re: Saltarelle resurrection!
Post by: Owen Woods on March 25, 2009, 12:47:52 AM
Oh, and is it a 3 row or is the inner row just accidentals? I don't think I've seen that layout before.
Title: Re: Saltarelle resurrection!
Post by: baz parkes on April 01, 2009, 11:43:26 AM
All my wire coathangers got used up over the years for fastening the various dangly bits of a pig (legs etc, not *those* bits) onto a spit when roasting it...

In the interests of thread drift . . .

Must've been a very big pig.  How long did it take to cook?

Usually 5-6 hours, depending on the weather, how hot the fire is and how on-the-ball (i.e. sober) the cooks are...

Ian

P.S. Yes that *is* Nick Walden's bottom...

Well,you did have an excellent teacher...

Baz

Having fond memories of Ironmen visits to Wakefield....
Title: Re: Saltarelle resurrection!
Post by: LeFonque on April 01, 2009, 01:29:08 PM
Very nice pictures. Great work Theo
Title: Re: Saltarelle resurrection!
Post by: IanD on April 01, 2009, 10:47:39 PM
All my wire coathangers got used up over the years for fastening the various dangly bits of a pig (legs etc, not *those* bits) onto a spit when roasting it...

In the interests of thread drift . . .

Must've been a very big pig.  How long did it take to cook?

Usually 5-6 hours, depending on the weather, how hot the fire is and how on-the-ball (i.e. sober) the cooks are...

Ian

P.S. Yes that *is* Nick Walden's bottom...

Well,you did have an excellent teacher...

Baz

Having fond memories of Ironmen visits to Wakefield....

Indeed -- but do you mean in pig roasting or beer drinking?

Ian
Title: Re: Saltarelle resurrection!
Post by: Malcolm Austen on July 12, 2009, 07:18:35 AM
"Its also very helpful for the melnet admins because it keeps all the serious thread drift in one place." 

You wana bet
Title: Re: Saltarelle resurrection!
Post by: Keithypete. on July 13, 2009, 01:12:06 PM
What a superb set of pictures, and indeed splendid guided tour of the inside of a box - and how to fix it! By comparison the inside of the East German 3 row someone lent  me looks like my six-year old boy made it at school. No wonder it is barely playable. Thanks Theo - what a jolly good site this is, this thread particularly. Cheers.
Title: Re: Saltarelle resurrection!
Post by: HallelujahAl on July 13, 2009, 01:55:07 PM
Quote
Here are the links again.  I wasn't aware that they were time limited.   I shall have to look for another home for them I think.  I probably need to add a photo gallery to my website.

 >:E
Why don't we have a photo gallery on this site like a number of other forums do?
And we could also attach a blog page as well?
 >:E

Quote
"Its also very helpful for the melnet admins because it keeps all the serious thread drift in one place." 
SimplePortal 2.3.5 © 2008-2012, SimplePortal