Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: mart0598 on January 29, 2014, 12:13:42 AM

Title: melodeon parts - Reeds
Post by: mart0598 on January 29, 2014, 12:13:42 AM
Hi,

I'm planning to restore an antique accordion, as my initiation to melodeon repair and restoration.

I would like to find the best place to order/buy reeds.

I'm starting from an old accordion to which the reeds are alltogether in the same block, and I want to replace this with better reeds. Since I'm beginning in this, I'm not looking for the better ones, but for something that worth to use.

Thanks

Martin
http://www.reverbnation.com/lespiocheux
https://www.songstall.com/lespiocheux
Title: Re: melodeon parts - Reeds
Post by: Christopher K. on January 29, 2014, 11:26:04 PM
A restoration uses parts that are original to the accordion or made in their likeness, and retains the original tuning pitch and interval. If you are only trying to make an old accordion playable again, then you can use any reeds you like, as long as you can make them fit on the reed block.

Quote
I'm starting from an old accordion to which the reeds are alltogether in the same block, and I want to replace this with better reeds. Since I'm beginning in this, I'm not looking for the better ones, but for something that worth to use.

Do you mean the set is comprised of reed tongues riveted to a single, long reed plate, and you want to install a new set of reeds that are riveted to individual plates? If so, this requires the construction of a new reed block or modification of an existing one. It might be easier to start with a different accordion. A photo would help!
Title: Re: melodeon parts - Reeds
Post by: Theo on January 30, 2014, 10:02:39 AM
Yes, it is a waste of time and money to fit new individual reed plates to replace the long plate reeds in a typical old German melodeon.  Like putting a modern engine in a 100 year old car.
SimplePortal 2.3.5 © 2008-2012, SimplePortal