Melodeon.net Forums
Discussions => News and Events => Topic started by: Katie Howson on February 26, 2014, 11:27:23 AM
-
Hi folks,
Just to let you know there are still a few spaces available on Sunday 23rd March - Melodeon Maintenance Day - in Mendlesham, Suffolk.
Learn what to do and what NOT to do! Led by Rees Wesson and Martyn White. Bring along an old box if you have one, to work on.
Cost £35 for the day. Full details on the East Anglian Traditional Music Trust's website at www.eatmt.org.uk
PS Also space in some workshops on the Saturday "Melodeons and More" workshops.
-
If you're thinking about this, there are still a couple of spaces available.
Email info@eatmt.fsnet.co.uk or ring 01449 771090 to enquire or book.
-
Martyn, Steve and I will extoll the virtues of thin metal thingies both reed and tool, there will be discussions on the movement of air through imperceptible gaps in the universe, gaskets, pallets, limited action, grindling, fondos and much praise of glue.
What's not to like?
I'm hoping that Katie (well, John actually) will provide a huge barrel of ale so that we can all get progressively twatted as the workshop progresses.
:|glug
Come on down!
-
Rees,
amongst the suggested collection of toys tools to bring to the workshop, there is mention of a 'soft' wire brush.
Soft is not an adjective I would normally associate with wire brushes!!!
Is there an alternative, more helpful description to aid recognition?
Thanks
-
amongst the suggested collection of toys tools to bring to the workshop, there is mention of a 'soft' wire brush.
Soft is not an adjective I would normally associate with wire brushes!!!
Is there an alternative, more helpful description to aid recognition?
I would suggest a brush with brass wire 'bristles'. You used to be able to get them for suede leather cleaning/nap raising. Try a shoe mender's.
Alternatively you can get glass fibre brushes e.g. here:
https://www.cousinsuk.com/catalog/tools/fibreglass-scratch-brushes
(I note this seller also stocks brass 'scratch' brushes too).
Glass fibre brushes are useful for cleaning rust off reeds, but they generate irritating glass dust, so wear a mask and gloves.
-
Dooooooh! Forgot all about suede brushes......used have one a decade or two ago.
Thanks (:)
-
What grade sandpaper was it? Will 60 grit do?
-
What grade sandpaper was it? Will 60 grit do?
Don't know what you are using it for but the answer is almost certainly NO!
For most melodeon stuff I use 240/280/320/360, for things like tuning reeds (bits stuck to lolly sticks) cleaning up woodwork etc.
-
Handy if you run out of toi...
The list just says sandpaper. I would have thought wet & dry, maybe, but without knowing the intended use... I guess a set of screwdrivers won't be an issue, small pliers, craft knife, scraper of some sort... Apart from, clearing out my garage so most of it is packed away. Easiest part is finding a box!
-
So who else is going - or at least prepared to admit it? And do we know how many altogether?
-
I intend to be there.
-
And me - with some 60 grit >:E
-
Mustn't forget my Dremel.
-
Yep, me too - got me an old grunty Hohner with ... potential! I think I might need to acquire the skill of waxing, because I'm not sure polyfilla is quite cutting it.
-
I've been consigned to this particular spares bin too.
I'm not in possession of a wire brush though. Is it particularly important?
-
Really informative day yesterday thanks to the enthusiasm of Rees, Martyn White and Steve Dumpleton of this parish. It also made me value the expertise of the professionals even more!
I'm sure I'm not the only one with a mental shopping list of stuff to buy from CGM, Maplin, etc
A few questions occurred to me during my long drive home -
- PC-based tuning software - does its accuracy and precision depend upon the quality of the mike and PC? Or isn't it significant?
- What tape to use to blank off reed banks when tuning? Masking tape?
- Views on using dirks accordion tuner s/w which analyses multiple reeds sounding at same time?
Cheers, Andy
-
- PC-based tuning software - does its accuracy and precision depend upon the quality of the mike and PC? Or isn't it significant?
According to Dirk it makes no difference and from my, probably less than scientific testing, I agree with him.
- What tape to use to blank off reed banks when tuning? Masking tape?
I don't, if I want to stop one of a pair sounding I use my finger. But to answer your question if I did I would use low tack painters masking tape.
- Views on using dirks accordion tuner s/w which analyses multiple reeds sounding at same time?
I find it useful but must admit to using iStrobosoft on my phone for most all single reed tuning. Where dirk's is good is checking bass/chords once they are in the box
-
- What tape to use to blank off reed banks when tuning? Masking tape?
Rees showed a useful technique for blanking off reeds when tuning a 1040 which you have to tune in the box, simply slipping a little sliver of card under the reed to stop it speaking, while the other one is tuned.
Very useful day - thanks Rees, Martyn, Steve and Katie...
-
Thoroughly enjoyable and interesting day, my thanks to Katie and the team. (:)
One little question - Rees (I think) had some tools made from spring steel pallet strapping. (No, not that sort of pallet.)
I remember the material - I don't remember what the tool was! Anyone jog my memory? ???
Just scrounged a length. Looks like it will take an edge >:E
-
It was a great day, thank you all for your rapid fire questions, it kept me on my toes. ;)
The steel pallet strapping is used for making general purpose flat thingies, used for pinging reeds, supporting reeds when filing, scraping wax and many other fettlings.
If scraping old wax off, either clean the scraper well with wire wool or use a different tool when working on the reed tongues.
-
The steel pallet strapping is used for making general purpose flat thingies, used for pinging reeds, supporting reeds when filing, scraping wax and many other fettlings.
The GP flat thingies can also be made from empty baked beans etc., cans. Ensure your can is steel, not aluminium which is a bit too soft. If in doubt, test with a magnet!
Cut both ends off the can with a tin opener. Using tin-snips or even hefty kitchen scissors, cut the resulting cylinder vertically and flatten out into a sheet. Then, from the non-corrugated portions of the can, cut strips about 4 inches long by 1/2 inch wide. File off any sharp burrs along the strip edges. Flatten the strip as much as possible using a rolling pin. Finally, file down the 1/2 inch or so on each end face, thinning it to a shallow wedge and a fairly sharp edge on the tip.
You can cut several GP thingies from a single can, and make them different sizes and shapes (parallel-sided, tapered, etc.)
-
- What tape to use to blank off reed banks when tuning? Masking tape?
If you want to blank off a whole bank of reeds on a reed plate, a strip of plain paper covering up the air vents will do. It's held in place by the pressure of the reed block clamps. It doesn't need to be sticky.
On the other hand, it can sometimes be a bit fiddly keeping the paper strip in place while you replace the reed block. I often use "Post-It Tape on a roll" (http://www.amazon.co.uk/Post--Note-Correction-Tape-Roll/dp/B000O3SGJA/ref=sr_1_8?ie=UTF8&qid=1395816537). It's just like the sticky edge of ordinary post-it notes but a whole roll of it (25m) and sticky across the whole width. It sticks like a post-it note and comes away easily and cleanly with no sticky residue.
With scissors, I cut a strip in half lengthways and it is just right for blanking off one half of a reed plate. When I'm finished with it, I peel it off and stick it up on the wall of my workshop ready for use another time. It can be used several times over.
Small slivers of the same tape can be used for blanking off individual tongues and slots - useful when tuning basses and chords especially. It avoids repeatedly removing the reed block.
Very useful stuff!
-
It was a most enjoyable day thanks to all those that attended, hope to see you again soon. And a special thanks to Katie for organising it all.
Martyn