Melodeon.net Forums

Discussions => Instrument Makes and Models => Topic started by: John MacKenzie (Cugiok) on March 03, 2014, 01:12:33 PM

Title: New acquisition.
Post by: John MacKenzie (Cugiok) on March 03, 2014, 01:12:33 PM
Any ideas on age, model, etc, please?


John
Title: Re: New acquisition.
Post by: John MacKenzie (Cugiok) on March 04, 2014, 05:07:07 PM
Thought by now, I'd have had a learned answer or two.


John
Title: Re: New acquisition.
Post by: Theo on March 04, 2014, 05:34:56 PM
Hi John

Pictures are a bit small to see much but it looks like a typical Saxony built two voice single row melodeon.  Cheaply produced in large numbers form the late 19th century to the middle of the 20th century by many factories in the town of Klingenthal.  If all the reeds are undamaged it might be made playable, but even in playing order not worth a lot today.
Title: Re: New acquisition.
Post by: Graham Spencer on March 04, 2014, 06:23:19 PM
I agree: the style and fittings absolutely shout Klingenthal cheapie. I have several of these for purely decorative purposes or as sources of small screws. springs etc (the bellows are often OK for a small tuning rig) because frankly they're not worth the effort of making them playable.  I didn't pay more than £12 for any of them.  I hope you didn't pay a lot for what essentially is a wallhanger.  Sorry to sound so negative, but as Theo says, they were cheaply mass produced and no great shakes when they were new.

Title: Re: New acquisition.
Post by: Christopher K. on March 04, 2014, 09:15:37 PM
I'm not sure that's from Klingenthal. The plates on the corners have the same shape as the ones that Hohner used. It would be helpful to see what it stamped on them. A lot of companies used the same or similar shapes for these corner pieces, but I've only seen that particular shape on accordions with the Hohner name or accordions built by Hohner, like the Cotillion posted by Microbot in the Ironclad (http://forum.melodeon.net/index.php/topic,14198.msg175634.html#msg175634) thread. Hohners from this era were well built but if you refurbish it, it will only play as well as a 100 year old accordion.

Regarding the metal corners: compare the strong rectangular shapes, angles of the in-turning edges toward the tack, and also the smaller brackets at center of bellows.

Edited for clarification: the accordion below is obviously not the same model as the one shown in the OP, it's just as used as an illustration of Hohner parts.

(http://i878.photobucket.com/albums/ab346/gumshoearcana/Hohnergerman1-row1926_zpsd485a08c.jpg)
Title: Re: New acquisition.
Post by: John MacKenzie (Cugiok) on March 04, 2014, 09:58:20 PM
It's a Hohner

John
Title: Re: New acquisition.
Post by: Graham Spencer on March 05, 2014, 05:17:17 AM
Well there's a surprise - sometimes it's good to be wrong!  I hadn't realised Hohner had used those cheap fittings or that particular case style. Over to the Hohner experts............
Title: Re: New acquisition.
Post by: AlexCJones on March 12, 2014, 02:16:39 AM
How about a picture showing the front? By that, I mean the grill.  And also the bass end.  I am not an expert, but without the front shot showing the keys and grill, it seems like to small of a glimpse.
SimplePortal 2.3.5 © 2008-2012, SimplePortal