Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: pikey on March 04, 2014, 01:37:34 PM

Title: Italian accordion reed maker at work
Post by: pikey on March 04, 2014, 01:37:34 PM
I don't know if this has been posted before, but it's a great video of a reed being hand made

http://youtu.be/GgYYyn72HLI
Title: Re: Italian accordion reed maker at work
Post by: Rob2Hook on March 04, 2014, 02:15:06 PM
I was amazed how vigorous the process is!  Obviously a skilled pair of hands like that will rarely make a mistake and destroy a reed during manufacture, but it gives hope to those of us who are afraid of flexing a reed too much.  I was particularly impressed by the linishing machine to polish and tune the reeds - but surprised again by how much swarf was lying around.  It reminded me of two optical polishers I visited.  One had an immaculate, clean-room with laminar flow air filtering.  The other worked amongst a terrible mess but both produced magnificent work.  You either filter it out or take care not to disturb it!

Rob.
Title: Re: Italian accordion reed maker at work
Post by: Broadland Boy on March 04, 2014, 11:54:27 PM
From 'our' Diatonix of this parish?

If so you have a super bit of kit for cutting / branding your boxes   http://www.youtube.com/watch?v=5k6Av3-SNZ4

What sort of wattage is the laser using and I was intrigued that you cut & glued up a stack of multiple, thin, reed bed components when the bass end indicated the laser is apparently capable of of cutting the whole thickness at once, as they didn't appear to be assembled cross grained like plywood is there some other reason for this ??

As for the reed making, a deceptively simple looking process by a real craftsman and with the plates being casually chucked about on the bench 'costo a mano' must have been an unfilmed bit  >:E  From the 'how its made' series they appear to rivet the reeds in under a press for ordinary quality boxes. It would have been interesting to see how the reeds are made - blanking press or something else??

I hope the cold blue was a laquer finish as all the chemical cold blueing compounds I've come across have contained nasties I wouldn't want such cavalier contact with....


Thanks for the pointer pikey, another interesting diversion for the evening ;) ;)
Title: Re: Italian accordion reed maker at work
Post by: boscaceol on March 05, 2014, 09:51:22 AM
Great insight into the final stages of reed making, I'm amazed at the apparent 'rough' treatment!  The speed was also impressive! I wonder how many he can make in a day!
Title: Re: Italian accordion reed maker at work
Post by: David J on March 06, 2014, 03:19:57 PM
Jurgens Ciccarelli I think, working in his basement in Castelfidardo. He has quite a few videos and pics of his reeds on his Facebook page
https://www.facebook.com/jurgens.ciccarelli?fref=ts
SimplePortal 2.3.5 © 2008-2012, SimplePortal