Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: nigelr on April 07, 2014, 02:27:52 PM

Title: Button repair
Post by: nigelr on April 07, 2014, 02:27:52 PM
The home G button on my Sandpiper "spins" and is starting to become annoying.  It's a stepped keyboard and the button screws into the wooden arm.  It feels like the thread has been stripped - turning it clockwise doesn't screw it in any further and anti-clockwise doesn't undo it at all.  I am reluctant to pull it out for fear of doing more damage, but this is looking like the most likely course of action, followed by gluing it back in.

Can anyone give me some pointers for the best fix?

Many thanks.  N
Title: Re: Button repair
Post by: Lester on April 07, 2014, 02:59:52 PM
I usually put a very small amount of superglue down the hole and screw the button in. They can still be removed if required (v unlikely) but will not rotate of their own free will.
Title: Re: Button repair
Post by: nigelr on April 07, 2014, 03:09:54 PM
Thanks, Lester.  I will try that. Cheers, Nigel  (:)
Title: Re: Button repair
Post by: nigelr on April 07, 2014, 07:39:51 PM
Turns out the screw was fine - it was the button head that had come off the screw head.  It was only being held on by the felt disc that looks like at some point had been glued to the button.  A dab of super-glue and it should be sorted (and I don't have to worry about the screw thread in the wooden arm).  Result! N  (:)
SimplePortal 2.3.5 © 2008-2012, SimplePortal