Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: itsabagel on September 17, 2014, 01:21:00 PM
-
Hi,
I've an old Hohner I trying to restore to playing again but I've a question about the strap bracket.
The accordion has rivets for a thumb strap (and there's no bevel in the keyboard for your thumb). There was a bracket (the one in the photo) on the top for a strap, but the other side of the strap was just crudely screwed in with a huge screw at the bottom of the accordion, so I'm trying to work out the best thing to do with it.
Am I right in presuming that these boxes were made to be played without straps originally, so the bracket that was on it has been added much later? Is there any site where I could get strap brackets for the top and bottom that wouldn't look totally out of place?
If it was a melodeon, I'd have no problem just playing it with the thumbstrap, but since it's a three-row I wouldn't manage without straps!
-
With most things melodeon or accordion related, Charlie Marshal is probably the first place to look. http://www.cgmmusical.co.uk (http://www.cgmmusical.co.uk)
Martin
-
I've come across that design of bracket on several old Hohners of various sizes and denominations, but always in the conventional place on top & bottom. I've no idea whether they're still available, or even if they're a Hohner original factory part, but CGM would certainly be the place to start. I thought I might have a couple,in my odds & sods box, but unfortunately I haven't.
Graham
-
I found another post with a very similar box. My box has rounded corners without the hohner emblem, though, not square ones with it.
http://forum.melodeon.net/index.php/topic,15274.0.html
Looks like that one has the same bracket on the top, but a kind of a swivel bracket or carabiner thing on the bottom that only takes a single screw.
At least now I know the kind of thing I'm looking out for.
(http://forum.melodeon.net/index.php?action=dlattach;topic=15274.0;attach=14478;image)
(http://forum.melodeon.net/index.php?action=dlattach;topic=15274.0;attach=14480;image)
-
You could duplicate that by using a stainless steel split pin, of the appropriate size, and a washer. Then open it out inside the box, and use a stainless steel split ring to attach the strap.
John
-
Perfect. Will do that. Thanks again.
-
Hey! That's my box. The top has the same bracket as yours. What was rigged up for the bottom was a cotter pin going through a washer and into a hole, and the cotter pin legs spread to hold it in. A made up strap had a split key-ring glued in the end and attached to the cotter pin. I've bought some modern strap brackets and will use them. I may have seen that old bracket style online somewhere............
-
Can I suggest you also fit a washer inside the box so the split pin doesn't become a 'split box' pin ;)
-
Will do! Ordered a cotter pin a few washers there.