Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Jeremy Burnett on January 17, 2015, 03:35:29 PM

Title: On row bass pallet repair
Post by: Jeremy Burnett on January 17, 2015, 03:35:29 PM
When replacing the spring in a spoon bass pallet is there any special way of getting the spindle out? ( before using force).
Title: Re: On row bass pallet repair
Post by: rees on January 17, 2015, 03:39:08 PM
You will need to grind the head off the pin. I usually replace it with a split-pin of the same diameter to facilitate subsequent removal.
Title: Re: On row bass pallet repair
Post by: Jeremy Burnett on January 17, 2015, 04:02:45 PM
Thanks Rees ,will have a go at that, Jeremy.
SimplePortal 2.3.5 © 2008-2012, SimplePortal