Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: rees on March 28, 2015, 11:13:37 AM
-
Some years ago I had some pallet levers made by a little man with a big press in Castelfidardo. I've now found a little man with a big press in Welshpool who can do the same job.
Can anyone identify the kind of steel rod in the picture? This was the stuff that was supplied by the Italian engineer.
I really like the appearance of it, I've tried using copper coated welding rod but it just looks like welding rod!
Diameter is 2.4mm (3/32 inch). The coating is a kind of brassy colour.
I've searched the internet but found nothing so far.
Theo, Lester, anyone?
Pic attached
-
Looks like chrome steel to me.
John
Or possibly
http://www.ebay.co.uk/itm/10PCS-Lathe-Drill-190x2mm-Silver-Tone-Stainless-Steel-Round-Rod-Bars-/191362904257?pt=LH_DefaultDomain_3&hash=item2c8e1e30c1
-
For brass plated you could try people who interior design.
Or ask Manu
Or anodised aluminium rod. Should be stiff enough in that thickness
-
Sorry didn't see the 2.4 bit.
This any good?
http://www.ebay.co.uk/itm/MODEL-MAKER-STAINLESS-STEEL-ROD-BAR-2-4MM-X-333MM-x-3-/180882991305?pt=LH_DefaultDomain_3&hash=item2a1d7768c9
John
-
Could be the colour balance of the pic, but it looks more like nickel-silver than steel.
Graham
-
How's about bronze welding rod??
http://www.amazon.co.uk/Langley-SILICON-BRONZE-BRAZING-2-4kg/dp/B00GAWSPH2 (http://www.amazon.co.uk/Langley-SILICON-BRONZE-BRAZING-2-4kg/dp/B00GAWSPH2)
-
Nope it's mild steel a little harder than a welding rod but still mild steel I think. Stainless is too hard especially when I come to bend it.
It is coated or anodised or something or other.
Trying to save myself a trip back to Italy.
-
Possibly too obvious, but have you shown it to the Welsh man with the big press? He might take one look at it...
-
Possibly too obvious, but have you shown it to the Welsh man with the big press? He might take one look at it...
Yes, he's as clueless as I am.
-
Model engineering suppliers?
-
It shouldn't too big a problem. B&Q sell wire for fencing, gardening etc. Easy to bend and approx 2.4 mm. A good SPLATT with a hammer will flatten out the end bit if required.
Have I missed something? Why the need for a big press?
A blow lamp an anvil and hammer can flatten most things.
-
Model engineering suppliers?
No luck there so far.
I've ordered some aluminium TIG rods and will try those but I do like that steel.
-
It shouldn't too big a problem. B&Q sell wire for fencing, gardening etc. Easy to bend and approx 2.4 mm. A good SPLATT with a hammer will flatten out the end bit if required.
Have I missed something? Why the need for a big press?
A blow lamp an anvil and hammer can flatten most things.
These are exposed pallets on my one-row Clippers. The big hammer job looks crap. So does galvanised fence wire.
The hydrailic press gives a smooth and uniform finish which is what my customers expect.
-
... a smooth and uniform finish which is what my customers expect.
*bites tongue*
-
HA, got it. Didn't realise they were on view. :|bl
-
Shut it, Bebb :P
-
ooooooh! ;D
-
Have you asked Monsieur Pariselle?
-
Nope it's mild steel a little harder than a welding rod but still mild steel I think. Stainless is too hard especially when I come to bend it.
It is coated or anodised or something or other.
Trying to save myself a trip back to Italy.
Does the new batch HAVE to be steel? Could you not use another equally durable metal? Just a thought......
Graham
-
There's feisty now, boyo.
John
-
I've just ordered some aluminium TIG rods. They will certainly reduce the weight but I do like the look of that bronzed steel.
Andy, yes the Frenchman might know of such things.
Now, (imagine I'm holding a stepladder) - "This is my stepladder, I never knew my real ladder"
Boom, tish, I thank you .....................
-
Hi Rees, The colour of the steel is maybe because its been heat treated to harden it then tempered to make it less brittle by heating to light straw colour then quenched in oil which produces the light colour, or it might have been just tempered after the flattening work hardening making steel to brittle. "follow that with your performing seals"
-
Nope, I know what that looks like and it ain't it. I have done much hardening and tempering in my time as an engineer.
This is definitely a coating.
It's very common. Steel chair and table legs often have this finish. Inside electronic stuff. Steel wall anchor bolts. Very common.
-
You can always get your steel rods anodised ;)
John
-
Zinc passivated?
-
Hi Rees, I think what you have is piano wire, available on ebay, if you look at the wire from Albion Alloys it appears to have your coating starting a few mill down the length. Hope this helps. Regards
-
The image on this site looks similar 13 SWG Piano wire: http://www.nogginend.com/product/Piano-Wire (http://www.nogginend.com/product/Piano-Wire)
Stephen
-
Or this stuff from the same web site Syale posted.
Nickel silver http://www.nogginend.com/product/Nickel-Silver-Round-Bar
Slightly yellow color, good cold workability and corrosion resistance in case you drop her overboard (:)
-
http://www.franz-holz.com/Continuous-piano-hinges---bookcase-strips-in-the-UK--United-Kingdom----Ireland_36.aspx
Might be worth an enquiry.
-
http://www.lathco.co.uk/contact.php
Can electro plate just about anything. So you could press your levers then get them plated. A couple of pipe making friends use them for plating keys and ferrules.
-
http://www.lathco.co.uk/contact.php
Can electro plate just about anything. So you could press your levers then get them plated. A couple of pipe making friends use them for plating keys and ferrules.
Seconded, and they are so pleasant to deal with. Nothing is too much trouble
-
Consider using titanium, I have been using it for years in the action of concertinas. As light as Al, as strong as steel.
-
Ha! Tell me about it, I've got a chest full of it. >:E :|glug
-
I've just ordered some aluminium TIG rods. They will certainly reduce the weight but I do like the look of that bronzed steel.
Andy, yes the Frenchman might know of such things.
Now, (imagine I'm holding a stepladder) - "This is my stepladder, I never knew my real ladder"
Boom, tish, I thank you .....................
;D ;D
That particular Frenchman knows everything.
-
The image on this site looks similar 13 SWG Piano wire: http://www.nogginend.com/product/Piano-Wire (http://www.nogginend.com/product/Piano-Wire)
Stephen
You may be onto something there. Thanks.
-
You might try Mc Master Carr I get a lot of specialized metal from them for my steam car http://www.mcmaster.com/#
They sell steel rod that I use for keyboard rods in about every size and alloy available. That gold colored coating may be cadmium.
-
I think I've found the answer.
It's "Zinc & Yellow Passivated" - same as many woodscrews that you can buy at the local builders merchants.
Rawlbolts also have this finish.
So, does anyone know where I can get Zinc Yellow Passivated steel rods?
-
You might try Mc Master Carr I get a lot of specialized metal from them for my steam car http://www.mcmaster.com/#
They sell steel rod that I use for keyboard rods in about every size and alloy available. That gold colored coating may be cadmium.
You can't just say 'my steam car' in passing, we need photos/info/a ride ;D