Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: up-fiddler on April 03, 2015, 08:05:29 PM

Title: Leather and parts in North America?
Post by: up-fiddler on April 03, 2015, 08:05:29 PM
Yes, I am a newb here and before you slash me to death let me say I have tried the Search function. I don't seem to have the knack of it.

I have three old Hohner boxes (c/g, g/c/f, d/a) that are tired and in need of repair. I would like to give it a go myself and have read several articles. Two questions.

1. Is there a recommended repair book available?
2. Is there a place to get leathers, etc. in North America?

I have built stuff in my shop all my life and have done quite a bit of lutherie. I am handy with tools and patient as hell. I just need the info and materials. (I can most likely make any specialized tools I might need.) If I could get a nudge in the right direction I promise I won't be a pain and keep pestering people.

Thanks in advance,
Dave


PS. I also own and play an a/d/g Weltmeister, two old chemnizters, a Morse, and a Lachenal.
Title: Re: Leather and parts in North America?
Post by: AirTime on April 03, 2015, 08:10:36 PM
The most comprehensive selection of parts can be found here:

http://www.cgmmusical.co.uk/CGM_Musical_Services/Welcome.html

Not in North America, but (speaking from personal experience) a very straightforward matter to have them sent over.
Title: Re: Leather and parts in North America?
Post by: up-fiddler on April 03, 2015, 08:14:00 PM
Thanks very much. Airtime. I wondered about that.

Is there a reference book you would recommend?
Title: Re: Leather and parts in North America?
Post by: Bill Young on April 03, 2015, 08:38:33 PM

Is there a reference book you would recommend?
You might find this accordion repair/restoration website useful. http://www.accordionrevival.com/
Although aimed primarily at piano accordions, a lot of the material is applicable to other squeezeboxes.
Title: Re: Leather and parts in North America?
Post by: up-fiddler on April 03, 2015, 08:48:34 PM
Thanks very much, Bill. I will head there and bookmark it right away. Cheers, Dave
Title: Re: Leather and parts in North America?
Post by: syale on April 03, 2015, 10:11:43 PM
If you want leather to make your own parts I have used Tandy Leather to fabricate straps etc. I have also found a good source of plastic valves and leather valves here in Houston TX.

Stephen
Title: Re: Leather and parts in North America?
Post by: up-fiddler on April 03, 2015, 10:36:01 PM
Thanks for your kindness, Stephen. I have two violins in my shop right now that I need to repair for customers and will start taking apart the Hohners around the 20th of the month. At that time I will know better what I need. Thanks again, Dave
Title: Re: Leather and parts in North America?
Post by: Graham Spencer on April 04, 2015, 01:39:04 PM
Dave, as you used "leathers" in the plural I'm guessing you might be talking about what we call "valves" in the UK, and I think I'm right in saying that what you refer to as "valves" are probably what we call "pallets" - the old "divided by a common language" syndrome. If you do mean valves as opposed to leather as a raw material, then Charlie is your man, as recommended above.

Best of luck - and don't be afraid to ask anything; you won't be a pain and you'll get lots of help and support.

Cheers
Graham
Title: Re: Leather and parts in North America?
Post by: up-fiddler on April 04, 2015, 03:00:05 PM
Thank you, Graham. Yes, our common language has some differences. Your Linden is our Maple if I remember correctly. I have played diatonics, chemnitzers, and concertinas since the late '80s. I love the sound of them. When one would start to get wonky-sounding I would find another used one somewhere and begin playing again.  I the process I have a pile of four that would be great little boxes again if I do the required maintenance. I waited until I retired and now I am finally getting around to the long list of things I wanted to build/repair.

Thanks again for the clarity. That will be helpful. And I am self-conscious about being a pain so I will keep the questions to a minimum. Toward that end, I'd really like to find a good repair manual specific to diatonic accordions.

Cheers,
Dave
Title: Re: Leather and parts in North America?
Post by: Theo on April 04, 2015, 03:53:26 PM
Thank you, Graham. Yes, our common language has some differences. Your Linden is our Maple if I remember correctly.
Dave

No, it's Basswood!
Title: Re: Leather and parts in North America?
Post by: up-fiddler on April 04, 2015, 04:03:35 PM
Okay. That makes more sense. Basswood makes great linings. (And is great stuff to carve.)
Title: Re: Leather and parts in North America?
Post by: malcolmbebb on April 04, 2015, 04:21:46 PM
... And I am self-conscious about being a pain so I will keep the questions to a minimum. Toward that end, I'd really like to find a good repair manual specific to diatonic accordions.

Cheers,
Dave
There is a good Concertina book by Dave Elliot (http://www.concertina-repair.org.uk/page7.html). However, it's unlikely that you could ask a question here that wouldn't interest several other people, and this site has a pretty amazing track record at getting questions answered.
So no need to be self conscious.
Title: Re: Leather and parts in North America?
Post by: Graham Spencer on April 04, 2015, 04:46:27 PM
Thank you, Graham. Yes, our common language has some differences. Your Linden is our Maple if I remember correctly.
Dave

No, it's Basswood!

Yes, it is - but usually called Lime in the UK and Linden in the rest of Europe..... ::)

(Just to confuse the issue, tilia vulgaris and tilia x europea, both native to Europe, are both known as common lime or linden, while basswood is tilia americana, a slightly less dense timber native to the Americas.......)
Title: Re: Leather and parts in North America?
Post by: up-fiddler on April 04, 2015, 08:24:20 PM
Thanks, Malcolm. I will order it today. Thanks for the reassurance also. That said, I will try not to be a pain.  ;)
Title: Re: Leather and parts in North America?
Post by: Ebor_fiddler on April 05, 2015, 11:46:15 PM
You, up-fiddler, sound exactly like the ssort of person we want on this site. Welcome!

Chris B.
Title: Re: Leather and parts in North America?
Post by: melodeon on April 13, 2015, 11:12:04 PM
Maple is sycamore and pine is "deal" ?

Linden is bass or cat piss wood for the delightful smell.
It is the principal wood along with poplar, used in LAZY BOY chair frames. (might fine quality that stuff, great for carving but has zip all for strength.)

Title: Re: Leather and parts in North America?
Post by: Graham Spencer on April 14, 2015, 05:57:22 AM
Maple is sycamore and pine is "deal" ?

Linden is bass or cat piss wood for the delightful smell.
It is the principal wood along with poplar, used in LAZY BOY chair frames. (might fine quality that stuff, great for carving but has zip all for strength.)

Maple and sycamore are closely related (they're both acers) but are distinct, though similar, species. "Deal" in the UK is a now out-dated term used in the joinery industryfor softwood; usually pine. Joiners used to talk about "red deal" and "yellow deal".
SimplePortal 2.3.5 © 2008-2012, SimplePortal