Melodeon.net Forums
Discussions => General Discussion => Topic started by: Broadland Boy on April 03, 2015, 11:17:11 PM
-
Not a spoof but I may be barking up the wrong tree here.......
During & following the gales I have been reducing fallen trees and limbs to manageable proportions around the village including a fairly substantial limb from a Holly in the churchyard.
I have resisted reduction of this to firewood lengths having heard somewhere that this was generally used for Morris staffs / batons and was not always easy to come by in the sorts of diameters that could be cleaved to shave or turn down to finished size - unless I have been the victim of a hoax.
So if anyone out there in wood clashing land needs some chunks of Holly from around 6-7" diameter down, let me know by PM and I will continue to defend it from woodburner owning villagers looking to add to 2017's winter heating stache.
Located near Wroxham Norfolk, can probably find a local Pagan to deconsecrate it ;)
-
Sounds plausible, they make walking sticks out of it in Ireland and it's considered very good for that.
-
Sounds plausible, they make walking sticks out of it in Ireland and it's considered very good for that.
Yes it was used hereabouts with an Ash shaft / handle and an eelskin hinge for the business end of the old threshing flail as its as hard as He££ when seasoned Steven, likewise for domestic and dairy turnery as its a very bland white tight grained timber which doesn't taint food (and turns like cheese when wet). Its usually the white, singed or coloured element of inlay, just not often found in larger lumps hence my reluctance to consign to the fireplace.
I have a huge (getting on for 21 dia at the base) Holly in the bank beside my workshop and live in fear of a strong Easterly relocating this to athwart or inside my workshop some day.........
-
a useful european hardwood, as you will know from cutting it. (and carrying it!)
phil bleazey (uk) makes decent flutes from holly, so i'm guessing it's not always like cheese when wet, although he will use well seasoned blanks.
nice with a natural stain in it.
-
It's also used for Border pipes by some makers.
Roger
-
I use it in wood turning, and can vouch for how hard it is, when fully seasoned.
John
-
Have you got the equipment to quarter-saw it?
The usual way you season the stuff is to quarter-saw it and paint the ends with gloss paint - that makes for more even drying with no splits.
-
Can also make a nice light colored addition to a mixed decorative inlay
-
It's also used for making white chessmen/chess pieces...
PtoK4 anybody?
-
I've had some stop-knobs made from holly - very nice.
-
It's a beautiful wood with a fine grain. Cursed be they who try to burn it.
Painting the ends is vital as Jack said either with tar or gloss paint, then wait a few years!
-
If it is that hard, the vibration you will get when clashing will hurt.
-
If it is that hard, the vibration you will get when clashing will hurt.
Well Black Sheep Border Morris dancers (http://Black Sheep Border Morris dancers) say "the sticks we use are usually holly wood" - so maybe best ask them... :M
-
If it is that hard, the vibration you will get when clashing will hurt.
Well Black Sheep Border Morris dancers (http://Black Sheep Border Morris dancers) say "the sticks we use are usually holly wood" - so maybe best ask them... :M
A buddy of mine of the borderist persuasion has been using the same holly stick for several years. He says it is the best.
-
If it is that hard, the vibration you will get when clashing will hurt.
Well Black Sheep Border Morris dancers (http://Black Sheep Border Morris dancers) say "the sticks we use are usually holly wood" - so maybe best ask them... :M
Hooray for Holly Wood...........
-
Tend only to look in once an evening so wow :o
Took down the last bit today and it is nearer 9" dia, as it was on the edge of a near vertical slope I have had to rope and cut into manageable lumps (can't get near with the tractor) so currently 1 at about 3' and 2 at about 18-20" around 8" dia which are nearly straight and clear of significant knots plus the 6" stuff which is knotty.
I generally half or quarter then PVA end grain to control seasoning and shaking - Home converted Oak, Ash, Yew, Laburnum, Box, Birch, Sycamore, Alder, Cherry, Plum, Apple, Robinia (and something as yet unidentified which smelled of Citronella Oil when felled) currently in salt for future turning, chair or clog making projects (along with some coppice Ash for Rakemaking) but unfortunately I can get to neither lathe nor bandsaw at present due the the amount of c£*p stored in front of them >:( As a result of this the Holly (plus an equivalent sized chunk of Laburnum which I nobly volunteered to remove for a neighbour when a blow before Christmas made its 45 degree lean of some years terminal :( ) will probably end up being quartered by froe and beetle (which ironically was made by Dad from a really gnarly knotty lump of holly trunk over 40 years back, pre chainsaw days I was on the other end of the cross cut saw.
So lots of useful information on uses but still not clear if :M dancers use branchwood or something more substantial rendered down to rolling pins and nobody apparently in dire need - but I'll not do anything irreversible with it for a week or so just in case,
Re Nick's comment, Score this week, 1 ea Sycamore, Hoss Chestnut, Leylandii all gone for firewood, when it's good turning or other craft wood I hate seeing a good tree butchered to log lengths too short to save or season, if its good, don't let 'em carve it less than a yard and six foot is better !
-
Holly was traditionally used for flails, before threshing machines came in (" ...a brand new two cylinder threshing machine .. tumty tum." ) Just another bit of useless information! :neigh: :|glug
-
As an aside - don't try to burn laburnum. It's apparently very poisonous...
-
Thanks for the warning Nick, as with much on the internet and otherwhere there is conflicting information regarding this matter and having checked as I had some branchwood with no other destination, an absolute minimum of 2 years seasoning and on an enclosed or chip gasification stove it should present no problem.
For our sins we live under reed (the opposite end of the spectrum to free reeds :()and at present do not have a fire, the economics of installing one are becoming increasingly attractive.
-
A thatched cottage with no fire Richard? How do you keep the Fenland chill at bay? I can't believe you practice enough to keep warm.. ;)
-
I wouldn't worry too much about burning Laburnum. Its alkaloid is about as poisonous as nicotine and anyway would be destroyed in a decent blaze. Eating it, or sweating it in a clay pipe, inhaling the smoke might be a different matter … even as undergraduates we didn't try that ;)
http://www.thepoisongarden.co.uk/atoz/laburnum_anagyroides.htm
-
But if you do any woodwork, especially processes that generate fine dust, you must take precautions to avoid inhaling the dust and any contact with eyes and skin.
-
A thatched cottage with no fire Richard? How do you keep the Fenland chill at bay? I can't believe you practice enough to keep warm.. ;)
Having helped a couple of folks who's houses and contents were totally destroyed by the intensity of the fire and vast quantities of water used we discontinued the use of the fire and have a gas bed in a woodburner type body, I have made some efficiency improving modifications which are effective but it is not as cheap as wood.
Keeping warm, I find cutting up wood for other bu%%ers to benefit from and a healthy fear of the afterlife are quite effective Brian ;)
The kids were discussing what they would want from Kim / my library after we no longer had need of it the other day (You might want to look away for a bit Mr C-B as it is not book friendly) and were pretty aggrieved when I told them we had decided on having our last 'warming' as part of the new Bibliomation scheme, where environmentally responsible folks could use their library to provide fuel for their funeral.
(OK you can look back Nick, ah, someone give him a prod) It dawned on me that there is a hole in the market and some enterprising squeezer (probably one of the younger ones) could offer collectors of the free reed a Melodeomation or Concertinomation service, as an added benefit it might improve the prices of some of the dreadful old Saxonian boxes that keep oozing out of ebay :D
Chris - I suspect the smell (of Laburnum), which is pretty foul, is enough to keep it out of the fuel chain, trouble is most people do not dry firewood for long enough these days, especially branchwood.
Theo - best turned or sawn wet IMHO, sanding most of the foreign hardwoods and some of the British 'exotics' can be very unpleasant, the taste alone tells you if your mask is fitting properly (there is an upside and a downside to my 'fungal growth', good filtration properties where the mask seats but needs an airline blow-out along with the recirculating filter) When I can get to the woodlathe or bandsaw I tend to wheel them outside if working on seasoned.
Anyone using a bag filtered extraction that vents into the room it is used in may be horrified at what passes through.
-
N CB didn't look away...........AAAAAAAAAARGH! >:(
-
Theo - best turned or sawn wet IMHO, sanding most of the foreign hardwoods and some of the British 'exotics' can be very unpleasant, the taste alone tells you if your mask is fitting properly (there is an upside and a downside to my 'fungal growth', good filtration properties where the mask seats but needs an airline blow-out along with the recirculating filter) When I can get to the woodlathe or bandsaw I tend to wheel them outside if working on seasoned.
Anyone using a bag filtered extraction that vents into the room it is used in may be horrified at what passes through.
Just to emphasise the safety point to anyone doing significant woodwork, occupational cancer of nose/sinuses (which you don't want!) was traditionally very prevalent in woodworkers; 23% of cases in the 1960s! So damp it down, use the extractor fan, and wear a mask.
-
Holly was often used as contrasting accent stripes in narrow widths on yacht cabin soles(floors). I think it would make beautiful decorative inlay on wooden melodeons
-
Psuggmog
Its resilience may also have its attractions but pure looks would be enough reason for using it in the floor
Had a look at some of your interesting instruments, not sure if adding that spring resonator to your free reed makes it something else but certainly a lot more voice than an ordinary saw although I can't see you wrestling 2 octaves worth into a case any time soon :D
-
I made a couple of Clippers in zebrano (zebra wood). It looks gorgeous but smells like dog poo when sawn.
-
Don't sniff it FFS! ::). See also the parallel "glue" thread. I give up! :Ph
-
I have full extraction facilities and a mask but the smell pervades for some time.
-
We once were dancing at the English Heritage weekend and when free were talking and learning about other crafts and past ways of life on display.
Someone was sawing unseasoned Oak before seasoning in useful sizes to be used later for some traditional uses. I couldn't believe it - water could be seen dripping as the teeth cut into the hefty branch. Felt like you needed to wring it out......
Q
-
I have full extraction facilities and a mask but the smell pervades for some time.
Doesn't it just.......I used some a few years back for turnery; I still have some I can't face cutting into!
-
I have full extraction facilities and a mask but the smell pervades for some time.
Doesn't it just.......I used some a few years back for turnery; I still have some I can't face cutting into!
Me too. Yuk!
I'm currently using pitch pine floorboards, laid 150 years ago in a Victorian Hotel in Llandudno.
Smells delicious and makes beautiful melodeons.
-
.
What pitch do they come in? ::)
-
.
What pitch do they come in? ::)
Old pitch.
-
I suspose the old nail 'oles mean its not quite perfect pitch Rees ??? but presumably the boxes made therefrom already know how to play for stepdances ?
-
Judging from what I heard at the Miners Arms, they sound great!