Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Suzanne Perron on April 06, 2015, 01:44:59 PM
-
Hello,
Here's a picture of the treble reeds of a Hohner Corso, the blocks say G-C but I get B-C on a tuner...is that what the notation on the blocks indicate...that the existing G reeds were r-etuned to B?
I don't play and sometimes distrust the Korg tuner I have, so I just want confirmation. Thanks.
-
Original Hohner BC reed blocks would be marked HC
-
Oh, I know it's not original B/C...but those numbers on the blocks are definitely my husband's writing. The question is..does that notation look like it means that it was retuned to B/C? That WAS his preferred tuning.
-
The notes on the reed blocks read +25, +5 -10 which is the type of notation used to describe the offsets from concert pitch on the three banks of reeds. It doesn't indicate a change from G to C, but doesn't preclude it either.
-
Theo is being careful in his replies Suzanne, but basically yes - the G-C rubber-stampings show that Hohner originally made the "Corso" in those keys, but it seems to have been converted to B-C.
When Hohner actually made a "Corso" in B-C they badged it as a "Double-Ray Black Dot" De Luxe.
-
Thank you both. I just have to be sure of my ebay descriptions and it's a little spotty right now hooking up with people in person to check these things for me...the tuners I am using don't always agree. One seems to get B/C right all the time but not other tunings.
Thanks