Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: dino.pafftti on May 12, 2015, 05:07:12 AM
-
project, the valve bass,,, good glue leather / felt ?????
-
Bostik Solvent Free Contact Adhesive.
-
I have used a contact adhesive containing the solvent toluene (with obvious precautions) for around 35 years.
However, the largest glue manufacturer in Oz (a virtual monopoly) has very recently been pressured by the Government to re-formulate its contact adhesive because of toluene abuse, i.e. glue sniffing..
I have found their "new formula" solvent-free contact adhesive is useless for gluing valves to aluminium reedplates.
I am yet to find a suitable replacement product here, and I know people in other trades who are having similar problems.
End result? Looks like I shall be closing my workshop as soon as my current supply of useful glue is exhausted.
A policeman friend tells me that glue-sniffers are now turning to methamphetamine (ice) as an alternative. Fat lot of good government meddling will achieve. Except, of course, for those with a vested interested in the illegal drug industry....
-
However, the largest glue manufacturer in Oz (a virtual monopoly) has very recently been pressured by the Government to re-formulate its contact adhesive because of toluene abuse, i.e. glue sniffing..
I have found their "new formula" solvent-free contact adhesive is useless for gluing valves to aluminium reedplates.
I am yet to find a suitable replacement product here, and I know people in other trades who are having similar problems.
Charlie Marshall sells the 'proper' Hohner valve glue: see here (http://www.cgmmusical.co.uk/CGM_Musical_Services/Reed_Valves.html#20).
He's based in Scotland but will ship abroad. Excellent service and highly recommended.
-
project, the valve bass,,, good glue leather / felt ?????
This question is not clear!
Are you asking about reed valves? They can be leather or plastic.
Or are you asking about pallet(aka valve) facing material which is felt+leather?
-
Not Reeds valve ... (picture)
Being heard that the contact adhesive
through the leather,,
I ordered the English Bostik Solvent Free Contact Adhesive,, maybe good for my needs :-\ (:)
-
leather glue the felt
-
To glue leather to felt I use pva, just the cheap stuff designed for gluing paper. No great strength is needed. Apply it to the leather only then press together immediately. For larger pieces (eg a whole skin) it can be easier to use a spray on contact adhesive because it is difficult to spread a thin layer of glue over a large piece of thin and soft leather. Don't apply the adhesive to the felt because it will soak in an make some of the felt go hard.
-
Ok.. Thank you (:)
-
I thought you meant reed valves, hence the Bostik.
PVA is fine for the flapper valve pallets.
-
Further to Theo's comments for large areas. We use PVA mixed with a little paste (to give it longer drying time eg more fiddling about time) and then apply it with a paint roller and tray. It works very well.
-
Bonding was successful.. I do not know whether the essential
glue the first blanket tree or leather
maybe,,,, way or that way ..
-
Yer breaking up Major Tom , what about the blanket tree?
I use hide glue to stick the pads to the pallets.
"Titebond Liquid Hide Glue" is available in Australia. Kinda hard to get high on the stuff though.
-
Yer breaking up Major Tom , what about the blanket tree?
I use hide glue to stick the pads to the pallets.
"Titebond Liquid Hide Glue" is available in Australia. Kinda hard to get high on the stuff though.
Titebond is excellent for pallets I agree. My earlier post was written when I was under the mistaken impression that the OP was talking about gluing flap valves to reed plates. I've found it not so good for that job. But thanks Kimric for the heads up anyway. (:)
-
Does anyone use shellac to attach valves? I know this is used when attaching pads to wind instruments. Also, shellac gasket sealer is recommended in ... I think the Reuther book but I'm sure I've read about it somewhere else. I use the Bostik Solvent Free glue...it's white when it comes outta the tube. For a quick stick I use contact adhesive, but it's tricky to control and something of a nuisance to use on a large scale (so I don't). Also it's not very nice to clean off.