Melodeon.net Forums

Discussions => General Discussion => Topic started by: Steve Fox on May 08, 2009, 01:37:11 PM

Title: Strap protectors
Post by: Steve Fox on May 08, 2009, 01:37:11 PM
At Witney last November I seem to remember that someone was selling a kind of sheath that you could velcro over your shoulder strap buckles to prevent them damaging your box.  Am I imagining this or does someone recall seeing these ingenious devices?  In which case, does anyone know where/if they are still available?
Title: Re: Strap protectors
Post by: Bill Young on May 08, 2009, 01:57:01 PM
Charlie Marshall (http://cgi.ebay.co.uk/SHOULDER-STRAP-BUCKLE-PROTECTORS-Leather-1-Pair_W0QQitemZ130300544257QQcmdZViewItemQQptZUK_MusicalInstr_Keyboard_RL?hash=item130300544257&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A13%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50) was selling these recently, which may be what you're after. He may have more. His number is 07799 153 216.

Alternatively, I have used insulating tape for this purpose, as a cheap alternative.
Title: Re: Strap protectors
Post by: BruceHenderson on May 08, 2009, 02:20:44 PM
  At Witney last November I seem to remember that someone was selling a kind of sheath that you could velcro over your shoulder strap buckles to prevent them damaging your box.  Am I imagining this or does someone recall seeing these ingenious devices?  In which case, does anyone know where/if they are still available? 

   Four of these (tubular, no velcro, so they slid on the straps before the buckles were done up) came with my Beltuna one-row in A.  They work very well.
Title: Re: Strap protectors
Post by: ladydetemps on May 08, 2009, 02:26:17 PM

   Four of these (tubular, no velcro, so they slid on the straps before the buckles were done up) came with my Beltuna one-row in A.  They work very well.
I got ones like that....but I'm gonna sew my own patchwork quilted ones ;)
Title: Re: Strap protectors
Post by: ganderbox on May 08, 2009, 02:44:13 PM

   Four of these (tubular, no velcro, so they slid on the straps before the buckles were done up) came with my Beltuna one-row in A.  They work very well.

I got two of these with my Loffet....couldn't work out what they were for at first!
I put them over the buckles underneath the box, but I find they keep slipping, so ones with velcro would probably work better. In general they are a good idea, as it takes no time at all for a shiny new box to get scratched by the buckles.
Title: Re: Strap protectors
Post by: Steve_freereeder on May 08, 2009, 03:02:08 PM
At Witney last November I seem to remember that someone was selling a kind of sheath that you could velcro over your shoulder strap buckles to prevent them damaging your box.  Am I imagining this or does someone recall seeing these ingenious devices?  In which case, does anyone know where/if they are still available?
It was me! I had them for sale. I still have a few left.
If you send me a PM with your address, I'll pop some in the post for you. Cost is �3 per set or �5 for 2 sets. Postage and packing �1 for either one or two sets. Each set contains 3 protectors for the three buckles on a single strap. So if you use two straps you will need two sets.
Title: Re: Strap protectors
Post by: Steve Fox on May 08, 2009, 03:25:02 PM
Thanks, Steve.  Will send you a pm.
Title: Re: Strap protectors
Post by: ganderbox on May 27, 2009, 12:38:12 PM

   Four of these (tubular, no velcro, so they slid on the straps before the buckles were done up) came with my Beltuna one-row in A.  They work very well.

I got two of these with my Loffet....couldn't work out what they were for at first!
I put them over the buckles underneath the box, but I find they keep slipping, so ones with velcro would probably work better. In general they are a good idea, as it takes no time at all for a shiny new box to get scratched by the buckles.

I've been meaning to ad a PS to this....
I tried taking them off and putting them back on the other way round.....they work fine now. :-[ ::)
SimplePortal 2.3.5 © 2008-2012, SimplePortal