Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Grape Ape on August 30, 2015, 03:43:18 PM
-
OK, so still testdriving the Gaillard. I am now quite certain that the unisonoric bass and chord Ab (F in GC speak) is out of tune. It sounds OK when playing only with the other basses, but introduce a well known melody or two on the treble side, and it just sounds "off." I don't think this is a result of transposing the tune to EbBb as that is the tuning I have on my Hohner, and I don't think it is the lack of thirds because I had that option on my now sold Galaad and never noticed anything like this. In addition to sounding out of tune, several of the bass buttons have a twang, kind of like the noise a mouth harp makes, after the note has been played, and even to an extent, after the button is no longer being played. I cannot imagine this is the way it came out of Gaillard's hands, so what is going on here and is it another tuning issue, or something even more wrong?
-
Big bass reeds do make a twangy sound after they have stopped being played. When the air supply is cut off the note stops but the reed will not stop vibrating straight away as they have a large mass (especially the ones with large tip weights) and you can here this noise when you play. But you need to be very close to hear it so it is unlikely anyone listening to you will hear it.
-
OK, so still testdriving the Gaillard. I am now quite certain that the unisonoric bass and chord Ab (F in GC speak) is out of tune. It sounds OK when playing only with the other basses, but introduce a well known melody or two on the treble side, and it just sounds "off."..................
Here's a couple of quick checks:
When you play the Ab bass, I am assuming you are hearing a low bass reed and a high bass reed. They should sound true and dead-on to one another and sound identical on both push and pull. If that's not the case, perhaps the high bass and low bass are out of tune relative to one another. Instead of a solid bass tone, it will have a bit of growl or warble.
If you are getting a solid bass tone on both push and pull, then play them against your Ab treble buttons, push and pull. They should be dead on.
If those are fine, try the basses with the thirds, fifths, etc. on the treble side.
That will help give an indication of what's out and what's in. Also, I would follow Theo's advice to have any corrections addressed by the B'box. They are good for it. (:)
-
Big bass reeds do make a twangy sound after they have stopped being played. When the air supply is cut off the note stops but the reed will not stop vibrating straight away as they have a large mass (especially the ones with large tip weights) and you can here this noise when you play. But you need to be very close to hear it so it is unlikely anyone listening to you will hear it.
I have heard what you describe on other boxes. This seems more pronounced and loud.