Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Luis Infante on September 24, 2015, 04:02:18 PM

Title: Weltmeister bass sistem tuning
Post by: Luis Infante on September 24, 2015, 04:02:18 PM
Hello guys! hope you are doing well!!! My understanding is that final tuning should be done with the reed blocks installed on the accordion, in the case of the weltmeister basses, how do you do that?? is there a way to isolate the individual reeds? tuning outside the box would be fine? any help will be really appreciated amigos!
Title: Re: Weltmeister bass sistem tuning
Post by: Theo on September 24, 2015, 04:32:44 PM
Tuning outside the box is a good start and depending on how sensitive your ear is, that may be sufficient.  For tuning inside the box you can isolate a reed by stopping the other reeds either with masking tape placed over the reed and valve, or wit a small strip of stiff paper slid into the gap between the reed and the reed frame.
Title: Re: Weltmeister bass sistem tuning
Post by: Luis Infante on September 24, 2015, 05:09:12 PM
Tuning outside the box is a good start and depending on how sensitive your ear is, that may be sufficient.  For tuning inside the box you can isolate a reed by stopping the other reeds either with masking tape placed over the reed and valve, or wit a small strip of stiff paper slid into the gap between the reed and the reed frame.

Theo thanks for your answer! I have a Dallape Supermaestro that I have restored for the outside, i think I did a decent work, I will submit pictures later. however I want to make a good tuning work myself since Im a little bit afraid of sending it to a technician here in Mexico. Fortunately it seems that the accordion has NEVER been touched to the inside and to my surprise it is very clean and only slightly out of tune, I have these particular questions, hope you can give me your recommendations to fix this issues

1. how a buzzing reed can be fixed?
2. a couple of reeds needs a lot of pressure to sound
3. a couple of reeds sound OK once started vibrating, however at the start (attack) there is a little "pop" sound
4. a couple of reeds have a small amount of oxidation near to the rivet, can that be cleaned? what should be right thing to use
5. the accordion has a clarinet reed in the cassotto and the oboe reed outside the cassoto, it is dry tuned although there is "mussette" switch, I would like to get a little wet sound but I don't know if it would work with reeds inside and outside the cassotto, if you think it would work which one would you set to 440Hz and which one would be sharper? I'm thinking in 443Hz to do not have a super wet tone.
6. how reeds are cleaned, visually it seems that everything is clean, but I want to know if it is a good practice to do some kind of cleaning to the reeds and inside the reedblocks.

lots of questions, I will really appreciate your support!
 
Title: Re: Weltmeister bass sistem tuning
Post by: Luis Infante on September 24, 2015, 05:18:24 PM
One more question! the accordion originally had microphone system that I removed since it didn't work, the bass cover doesn't have any hole to let the sound go outside, I don't know if it is normal, or if this was done on purpose since there was a microphone and they wanted to mute the sound a little bit. the basses have a decent volume even without holes, but I was wondering if drilling some holes would help to increase the sound of those powerfull tuba reeds, it sound very deep!

thanks again amigos! (amigo is friend in spanish)
Title: Re: Weltmeister bass sistem tuning
Post by: diatonix on September 24, 2015, 10:20:52 PM
Modern tuning programs such as Dirk's allow you to tune chords and octaves containing up to 3 reeds without having to resort to masking tape (which, admittedly, can still be quite useful at times).
SimplePortal 2.3.5 © 2008-2012, SimplePortal