Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Sue on October 17, 2015, 03:07:21 PM
-
I seem to have some glue on a couple of melodeon buttons, I thought I could peel it off but it's not coming off easily. Not sure what it is, might be UHU or something like that. otherwise the buttons look quite good and I don't want to damage them. Any suggestions, buttons are the sort found on most modern Italian boxes.
Thanks
Sue
-
Persistemce may win through yet. I'd be tempted to try softening it with a little solvent, just a dab of IPA which isn't too aggresive. If they're screw on pearl buttons on an open action, you can always get replacements quite cheaply from Charlie Marshall.
Rob
-
Persistemce may win through yet. I'd be tempted to try softening it with a little solvent, just a dab of IPA which isn't too aggresive. If they're screw on pearl buttons on an open action, you can always get replacements quite cheaply from Charlie Marshall.
Rob
IPA = India Pale Ale round here!
-
Sorry, Iso Propyl Alcohol. It goes by another name nowadays, buy I can't get the hang of the new terminology.
Rob
-
Thanks Rob, This might be an obvious question but where can I get this and what name would it be marketed under.
-
You can find suppliers using Google, or even Ebay. But you could also try surgical spirit from a chemist, another form of alcohol.
-
Your local Lloyds Pharmacy should stock it
http://www.lloydspharmacy.com/en/isopropyl-alcohol-70-liquid-106215
-
Persistemce may win through yet. I'd be tempted to try softening it with a little solvent, just a dab of IPA which isn't too aggresive. If they're screw on pearl buttons on an open action, you can always get replacements quite cheaply from Charlie Marshall.
Rob
IPA = India Pale Ale round here!
Same here! good stuff too!
product also known as Rubbing alcohol in my neck of the woods.
https://en.m.wikipedia.org/wiki/Rubbing_alcohol
has a lot of different uses, it's what your buying most iof the time when you get Dry Gas products.
-
Brasso might work, applied with a Q-tip...
-
Worked for me Stephen,and brightened up the buttons too...
-
May be a pointless question by now but what sort of glue was it Sue ?
-
I think it might be UHU, or something that looks like that. I've got some surgical spirit and will have a gentle go with that when I get a few moments.
Sue
-
Its as good a start as any Sue, failing that softening it you may find a bit of wet & dry paper glued on something like a lolly stick - nail file style will gently abrade it off - is it the Preciosa ? They have the same concertina like buttons that Liliputs have - a bit of card with a pencil hole or two poked through would protect the keyboard lacquer from unintended sanding - happy fettling ;)
-
Thanks everyone for all the advice. No it's not the Preciosa, these are large melodeon buttons, as you get on most Italian boxes.
Sue