Melodeon.net Forums
Discussions => Instrument Makes and Models => Topic started by: Rog on October 19, 2015, 10:07:54 AM
-
Hi
I have just restored this box but I don't really know what make it is. Can anyone suggest an age and maker?
The veneer and banding is marvellous (and how weird the banding is the same as I have on my Pariselle box).
It is in CF and has a gleichton C/C button and a club bass layout. I had to replace all the bass buttons which were all smashed up and put in a new air button, which had gone awol. The reeds are all screwed into place and have a little oval cutout in one end to accommodate the screw. The low bass reeds are *huge*, I mean they are *big*, hence the wonderful honking sound.
https://youtu.be/PtwScEBI71U
-
It'd be typical of what many German makers would have made and described as an "Italian model" in the 1920's, but those buttons and the bellows make me think of Hohner as a possibility, or maybe their Trossingen rivals Koch.
Are there clues as to what kind of wind key it once had, and what are the reeds like?
-
Looks like you've done a lovely job there Rog.
-
It'd be typical of what many German makers would have made and described as an "Italian model" in the 1920's, but those buttons and the bellows make me think of Hohner as a possibility, or maybe their Trossingen rivals Koch.
Are there clues as to what kind of wind key it once had, and what are the reeds like?
Here is an album of pics so you can see the reeds. Also the bass end. It's all made of timber and wire! I had fun getting the old buttons off - the screws just shattered - and had to make new pistons.
https://goo.gl/photos/1PB8GEzRTJN3mHKNA
Thanks Nick. The hardest part was sorting out an air leak, which turned out to be through the treble fondo - some glue sorted that out once I worked out where the flippin air was going... (:)
-
Very nice job. Where do you get the leather discs that are holding the rods on to the pads/pallets?
John
-
Lovely job Roger, made my fingers itch to be doing something similar. If my German son in law manages to unearth a beaten up one row in Bb for me I'll be picking your brains for sure...
-
Very nice job. Where do you get the leather discs that are holding the rods on to the pads/pallets?
John
Ah.. these are the original ones. i didn't have to do anything to the bass pallets.
-
Here is an album of pics so you can see the reeds.
Dix reeds on seperate plates, it could well be a Hohner 374 "Stradella Model" from the '20s then, though in the catalogue they have a lyre design in the middle of the grille...
-
Yes,, I like to think it's an early Hohner, or at least maybe the reeds are Hohner. But wouldn't there be some identifying lettering somewhere...
-
No, the reeds are stamped with a circle, so they're made by Gebrüder Dix in Gera.
Hohner used them before they made their own steel reeds, though plenty more makers did too.
-
Hi Triskel,
thanks for that. Yes indeed they are stamped with a circle. And you said Dix reeds in a previous post.