Melodeon.net Forums
Discussions => Teaching and Learning => Topic started by: Peter G on May 25, 2009, 09:56:07 PM
-
Help please!
I have a squeaky bass button on my Pokerwork :o
I'm pretty sure there are no vermin around - no self respecting rodent would want to listen to my efforts 2 or 3 times a day. I also presume the oil can is out
Will it get better, doctors or am I going to have to check the user serviceable parts inside?
Thanking you in anticipation
PeterG
(:)
-
Yes, PG - I'm afraid you are! How to go after that depends upon what you discover in the bowels of your machine. There's probably something catching, which means that the something needs freeing in what ever way seems suitable at the time! It's not rocket science (though in fact rocket science is very simple, it's the technology that's difficult). If you don't fix it, come back here. Good Luck!
;)
-
Ooh.. out wi't screwdriver then!
Anything to be particularly careful of?
:-\
-
Ooh.. out wi't screwdriver then!
Anything to be particularly careful of?
:-\
Yes, the screwdriver!
Don't stick it in your eye.
Seriously, there's nothing too delicate in that part of the melodeon as the reeds are located elsewhere.
Try not to bend the lever mechanism.
The problem probably lies in the lever mechanism, metal to metal squeak - cure with light sewing machine oil,
or where the button rubs on the casing - plastic to wood squeak - cure with Danish oil or similar.
-
No big deal, I had a few squeaky bass buttons on my Corona and a few drops of light oil where the rods go through their holding part solved it.
-
Thanks gentlemen!
What is Danish oil?
(:)
-
Thanks gentlemen!
What is Danish oil?
(:)
There are all sorts of oil for treating wood: Danish oil, Teak oil, etc. Available from your local DIY emporium.