Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Andy on November 01, 2015, 02:15:14 PM
-
Recently acquired a Hohner Gaelic IV (That is the 2 row BC 23/8 rather than the 3 row BCC#37/96) and a magnificent thing it is. Only problem was that the air button shifted air very slowly, took a look inside and found the air hole had been taped up to leave a very small hole (0.25 sq in). The actual air hole is a massive 2.14 sq in. Tried it with the original full size air hole and found it shifted air so fast that it was almost impossible to play a note while using the air button. Have tried partially blocking it off again (bit of ply and a hot glue gun) with an effective size of 0.70 sq in, this seems about the right balance for me although I may increase it slightly. I can only imagine that at some point someone in Hohner got fed up of complaints about slow air buttons and decided to shut up the complainers once and for all.
This took me by surprise as I had sort of realised that an over fast air hole was possible but had never experienced such a thing. I'm thinking that 2.14 sq in must be about the biggest air hole out there, or is there anything even bigger?
-
I have played 2 row gaelics with presumably the same large airhole and not found any problem whatsoever in sustaining a note whilst pressing the air button. For what its worth I use the air button sparingly on BC and BCC# boxes 'balancing' the bellows where possible by use of 'alternative' buttons. I do however like an air button/hole that will instantly collapse the bellows when required so that the bellows can be instantly brought back almost between notes . I do choose very deliberately where to use the air button and avoid constant 'didling' with it.
Again and for what its worth I like the 2 row gaelic very much and definitely prefer it to the corresponding Paulo Soprani.
george
-
I'm thinking that 2.14 sq in must be about the biggest air hole out there, or is there anything even bigger?
I don't know, but the air button on a Hohner Preciosa operates two air holes simultaneously.
-
My 1920's Hohner BbEb also has two air holes. I don't find it difficult to use - it does allow you to gain or lose air very rapidly if you need to. I can't really comment on your set up, but I suspect it may just require some getting used to.
-
an often neglected point about airbutton operation is the importance of letting go of it swiftly once the required bellows movement has been achieved . I agree with the getting used to it comment as it is an integral part of playing the diatonic box rather than being a sort of 'add on' as on a piano or continental box where it has no part in playing a tune.
george
-
Hohner Clubs have either two, linked pallets on the air button or a very large pallet (probably the equivalent of playing at least four low treble notes). I understand this is because the Club is played predominantly on the pull and the bellows needed to be slammed shut between phrases. Earlier, large boxes have the press in bar typical today on Italian boxes whereas the smaller models have the pull down lever as per the Pokerwork. In both cases, there is no problem just stroking the lever/button to get the flow rate required. In fact I don't even notice anymore when and where I use the air button except the look on other box players' faces when at the end of the tune I open the air valve completely and the box slams shut. I'd even suggest that an "oversized" air valve is good for teaching you to control it.
Rob.
-
Gaillard holes are about that size and gulp air like a surfacing whale. Very useful if you want to do a lot of playing on the pull (eg Bb and F are all pull on my kit) or use air valve as a rhythm element. The latter doesn't work too well on with a small hole. Obviously the valve must fit well and be appropriately made. Anything smaller than the hole - doesn't bear thinking about!
-
another advantage of a large hole is that it can be ,sparingly, feathered as a sort of air brake to smooth bellows direction changes.
george
-
Yes, it can make it much easier to maintain correct rhythm in fast passages as the change of bellows direction is no longer such a difficult concern.
Rob.
-
the Club is played predominantly on the pull
No. The Club is played exactly as any other type of melodeon.
-
My first BC box was a Gaelic IV. I showed it to Billy McComiskey and the very first thing he told me to do was tape up the air hole. His suggestion was to make the air hole the size of a quarter (about 24 mm in diameter for those not using US coins). For the style of playing that I learned, the short sharp breaths would have been too loose with a large air hole. I only ever need "gasps" when the bellows are far out in the key of A and I need to get back fast. Even so, the smaller size air hole was plenty.
I miss mine and wish I had never sold it, but the Nuage I bought with it is also pretty cool! I even installed piano accordion reeds in the bass to make the D and G chords press and draw on the same buttons. I thought I was pretty clever, until I learned that Joe Burke had done the same thing years before. Now, I have a 1950's Paolo, and I like the mechanics better, but the reeds on the Hohner were pretty spectacular.
-
The Hohner IV I recently looked at had a massive A hole, more of a slot really, that was most of the width of the fondo/bulkhead thingy. I didn't notice or feel it was any detriment to playing the instrument (a three voice jobby).
-
Just to say that Pignol waxes lyrical on the importance of good air hole design in this year's DVD "Aire et Geste" and how a poorly set up one affects one's play. Then Milleret demos some clever rhythmic stuff that includes air valve presses, using it as a rhythm element. To be fair he is known in France as a "rhythm melodeonist" often carrying the riff while others do lead breaks.
-
My first BC box was a Gaelic IV. I showed it to Billy McComiskey and the very first thing he told me to do was tape up the air hole. His suggestion was to make the air hole the size of a quarter (about 24 mm in diameter for those not using US coins).
Obviously not everyone in agreement here as to what is ideal, but strange enough Billy McComiskey's suggested air hole size comes out at the same area (0.70 sq in) as I am trying right now. For comparison a Double Ray Deluxe comes out at 0.60 sq in.
Andy
-
I've just been playing my D/G Scarlatina for Morris practice, and after much work it is now a more playable instrument from when I bought it. The main difference is that, as bought, it needed a great deal of energy to pull the bellows open, which I eventually diagnosed as too small an Air Hole. I enlarged the hole as far as I could without having to replace the patten and it goes a real treat now. I believe that air holes have a much greater influence on how a melodeon plays than most of us give them credit for. :||:
-
The original Rochelle concertinas suffered from an undersized air hole. This did require some planning to keep the bellows sensible, and did affect playability. A sharp opening resulted in a loud wheeze.
It was enlarged on the later version.
-
I eventually diagnosed as too small an Air Hole. I enlarged the hole as far as I could without having to replace the patten and it goes a real treat now. I believe that air holes have a much greater influence on how a melodeon plays than most of us give them credit for. :||:
All holes are important for the player earoles, airholes and I wont mention Rsoles!
george