Hartwin Dhoore plays a 3 row 18 bass Van der Aa. When I spoke to him at the Mill Race Festival he told me he also has an 18 bass Handry but prefers to travel with the Van Der Aa because it's lighter. I wonder if the teak is a factor in that?
| Perhaps as much in its structural strength than density. This site (http://workshopcompanion.com/KnowHow/Design/Nature_of_Wood/3_Wood_Strength/3_Wood_Strength.htm) has teak somewhere in between American hard and soft woods in density with a breaking strength is approx twice that of the latter. There are also a 'stiffness' numbers, but (makers please correct me) bending isn't usually a problem in boxes? Frans is a great parer down to minimum, and has been sculpting lighter and lighter boxes since I met him in St Chartier in the 90s. Oakwood's compacts (they used plywood/ veneers!) have been an influence, although he doesn't really acknowledge that ;) I 'think' he makes the wood thinner while keeping important structural bits. Mine is his more usual painted design, using a fine grained hardwood, forgotten what, but also very light (I can hold it on a finger). His drive for compactness also has him shimming reed plate edges - to fit them in closer. As more than half the weight of an accordion is reeds that'll be a factor too. Incidentally, though now in his 60's van der Aa continues to innovate. These pics came up on his FB at the weekend - 15 and 24 bass layouts in a compact! How does he squeeze them in? | (https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xlp1/t31.0-8/905918_10206728583086341_5450249117237871843_o.jpg) |
.... These pics came up on his FB at the weekend - 15 and 24 bass layouts in a compact! How does he squeeze them in?
.... These pics came up on his FB at the weekend - 15 and 24 bass layouts in a compact! How does he squeeze them in?
I could not find his facebook site - any chance of a link. Thanks.
Come to think of it Sandy, having been following your other threads looking for a lightweight mixte system, Vander A might just be your guy! Of course you must have already realized that. Chris R. Is sure to be able to put you in contact with him.
Try his website under "News"....http://www.accordionmaker.com/nieuws4/!boot.php (http://www.accordionmaker.com/nieuws4/!boot.php)