Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Adam-T on December 11, 2015, 08:37:10 AM
-
I`m getting a Club Modell II next week as a winter project, I believe a modded one of these is still Theo's Weapon of choice . I don`t know what key , really hoping its Bb/Eb but I`m sure it`ll be C/F as 99.999% of them are ..
I`ve fettled 30s Pokerwork sized 2 rows, (a Double ray & a Presswood), a 1040 and two Student-1 Mk1 accordions from the same era so assume the build is similar regarding mechanics, reeds, valves etc . but are there any pitfalls peculiar to this box, I`ve never had an "Erika" before in any guise. the wood strip riser for the forward bass buttons needs replacing .
-
Hi Adam
I'm sure that Theo will be along soon with technical advice, but in the meantime let me assure you that these are great boxes - I have several (mostly restored by Theo) and use them a great deal. Good choice!
Cheers
Steve
-
Best diatonic box that Hohner ever made in my opinion.
Most things will be familiar if you have worked on a two row Hohner. Main differences are the keyboard construction with removable top plate, the the treble mechanism is more robust, and a bit more complex.
-
Thanks Steve ..
Theo - so it has a removable top plate like a "normal" (read later curvy celluloid) Club-II/III, that`s handy , I guess these are 3rd button start with low notes (the accs having their own mini-row) , Club basses, Gleichton etc
I wanted one of these during the MAD phase a few years ago as the other early 30s boxes I`d had (That Double Ray I "relic`d", C/F Koch , Student 1s etc) had an extra lively edge to them which even the regular (50s onwards) Ericas / coronas / Pokerworks seemed to lack ..... and also that there were 4 accidentas not taking up valuable row real estate :D
-
So it wa you who bought it! The broken riser shouldn't be too much of a problem, you'll simply have to make a new one. Snip off the bent nails (pivot pins) that hold the bass levers and they'll pull up and out - just like a Pokerwork. When I had to replace a couple of broken bass buttons on a Pokerwork, Martin advised me that Hornby track pins were the most easily obtainable replacements for the pivot pins, though I can't swear that it'll be the same on the Modell II.
Rob.
-
The broken riser shouldn't be too much of a problem, you'll simply have to make a new one. Snip off the bent nails (pivot pins) that hold the bass levers and they'll pull up and out
LOL Rob - I`ve re-used Bent hohner bass mech "Pins" before now , always remember to label the rods when taking the lot out , it`s tiresome working out which one goes where even when there are only 8 .. at least all have their buttons on ..
I`m expecting to do a full re-wax and valve on this box (curly cabbage leaves for valves on 30s Hohners) , just hoping it`s not far out of tune and all the reeds have their tongues .. Prob have to do Pallets too but reluctant to use the usual thick felt/leather on the treble end as the last time I did it (on a Presswood) I`m sure it dulled the sound a margin and took the edge off, I want the full blooded Erika sound from this .. also hoping the gussets are intact ..
-
So it wa you who bought it! The broken riser shouldn't be too much of a problem, you'll simply have to make a new one. Snip off the bent nails (pivot pins) that hold the bass levers and they'll pull up and out - just like a Pokerwork. When I had to replace a couple of broken bass buttons on a Pokerwork, Martin advised me that Hornby track pins were the most easily obtainable replacements for the pivot pins, though I can't swear that it'll be the same on the Modell II.
Rob.
Always mark the levers in some way to make sure they go back where they came from. Can take an infuriating amount of trial and error otherwise.
-
Apols for slight topic drift, but is there any big differences between the Club Modell's of this vintage and the Erika's of the 1930's - gleichton aside of course?
-
Good Question, I`d like to know that ....... the Modell-I has only 2 accidentals but otherwise looks the same as the Modell-II . the Model-III is more pre-Corona shaped complete with rounded-top grille but in the same style wood wise as the I and II ..........
the Erika looks like a re-badge of the Modell-II with more sophisticated cosmetics (less home-made looking labelling), I thought the Erika was a club box also but never played one so if not, I guess that`s the "mechanical" difference ... Is this right Theo ?
-
Yes Erika is a club model. As far as I can tell the Erika and the wooden bodied club II models are the same. There are variations of graphics on both, and on both there are variants with a recessed panel for the bass buttons.
-
is it an Age thing then ? (Erikas older or newer) or was the Erika the "Ghia" version (Posher cosmetics)
-
Well the Club-II has arrived - pretty much as expected (and hoped) from a box owned most if not all its life by one person ..
never opened before so clean as a whistle inside all the typical 30s Hohner cabbage leaves are there (and crying out for plastic valves), cracked original wax and a couple of stuck tongues . mostly in tune (all in fact bar some trem difference on some notes), the Zinc reedplates are refreshingly clean and tongue rust very minimal !! , the Fondo's leather gasket is intact too and there`s no worm anywhere in the box. ..
The outside as usual not fared as well (which is usual) though the bellows are very nice indeed, the grille is rusty on the inside and the gold paint (they weren`t chromed) rusty in parts, way easier to sort than pitted chrome :) . the pallets are intact and never been messed with, typical half a kilo of muck in there (Hair, dead spiders, fluff etc ) and the remains of the grille cloth hanging loose, the woodwork`s varnish looks largely good except for that it`s at that stage where even a fingernail can leave a white line in it - is there a way to remove this varnish without losing the graphics ? .....
On this one the fingerboard hasn`t a removable top like the early Corsos, Viktorias, Pre-coronas etc and has cracked and lost a bit between 2 buttons - can these fingerboards be sourced ? , the 4 accidental one seems to be the most common at least .
-
On this one the fingerboard hasn`t a removable top
The picture shows it is the usual shape, so I strongly suspect that the top is a later replacement. and it has been glued on. You should be able to remove the top and replace it with the standard black celluloid, or even make a better one and screw it on.
-
The top looks as old as the rest of it Theo and there`s no tell tale signs of ever being replaced , no cracks in the black paint at the edges etc, it still has "original Hohner" and "DRP" underneath (Feint as you`d expect) so the whole lot hasn`t been re-done and the top is in by far the worst condition . I`m convinced that this fingerboard was made like this and replacing the top will be like doing an old presswood etc ..
-
Well you've seen it and I haven't, but what makes me think it's not an original top is the finish. Hohner black painted keyboards have a thick glossy finish. Your top has a thin dull finish, even in the corners where it is protected from wear.
-
I tend to agree with Theo as the finish usually wears through without flaking away like yours appears to have done. It may still be possible to split it off and replace it with an acrylic one or similar, maybe just a thin ply and repaint - get an accurate tracing of the top before anything irreversible has occured! I always fancied a stainless top with a machined, jewel turned finish (poser!). That should balance the weight of the bass reeds.
Rob.
-
The thin dull look was years of grime, after a clean, the glossy finish can be seen ..
BTW what is the best stuff to clean the varnish and graphics, I can re-varnish (or use finishing Oil) over the top .. thanks
-
It really does look like nobody has been inside since it left the factory. There are no discernable marks where the retainers have been moved to release the reedblocks and everything has the same level of patina. As you say, the outside is not so lucky. The PO has pencilled the notes along the keyboard and the fact that the finish revelas the woodgrain and has cracked suggests that it has been damp, so lucky it hasn't been played and let all the damp inside.
I wonder if anyone knows of a company that could strip and replate the grille? I think with a strip, polish and nickel plate it would look fantastic. There were some articles in Practical Boat Owner about plating ay home, basically using a foam wand to brush a coating onto a piece in an electrolyte bath - must try to find it again. Of course, it may be cheaper to get a professional to do it if it can be added to a batch of other work.
Rob.
-
Originally the grills on these models were made of steel with a silver paint finish. You can still see plenty of the original finish on this one, and the small rust patches show that the material is steel. Some later models with the fir tree grill pattern were nickel plated on brass, and I've even seen one or two that looked like stainless steel.. Nickel plating on steel requires a lot of surface preparation compared with painting. Paint is good at concealing small surface defects, but plating will draw attention to them! My usual method with these is to use paint striper and steel wool to get down to bare metal, remove any rust then prime and paint with a silver car paint.
-
Yeah - the inside is lovely and the reedblock retainers were hard to move (did it very carefully), they now show signs of being removed which as you said Rob, would have been there prior to me doing it ..
the damp hasn't damaged the bellows either and even the tape is in good nick - there`s a small hole in one of the gussets, thankfully on a flat part of the leather (which would be best glue for a patch ??) . after a clean-off the pallets are very nice (no staining, cracks or rot) but some of the rods are rusty as usual and the pallets will need careful removal to save wood damage .
Sorry - Theo posted while I was typing , this one looks like a gold grille (My pre-edit text below )
These grilles weren't plated as far as I know, this one definitely was painted gold like the Double-ray of the same era I had which I painted it black as I`d "relic`d" the box (I ain`t relic`ing this one) , I`ll paint it gold again
Proof of the one-piece fingerboard
-
Have you inspected the reeds for rust, especially on the treed plate enclosed side. Can be a real pain to remove.
-
I`ve yet to see one of these old hohners without any whatsoever , this has very little, just the usual scattering here and there as seen in all the pre-70s Hohners I`ve opened , far from the "more rust than metal" which they can get like ... the reeds will have to be removed for waxing and valving anyway
-
Proof of the one-piece fingerboard
Well that is unusual. If you decided to replace it rather than repair I think the usual built up type would probably fit without too much trouble.
-
Didn't NickCB have some plating done fairly recently?
-
Well that is unusual. If you decided to replace it rather than repair I think the usual built up type would probably fit without too much trouble.
I`m going to have a go at PVA'ing the cracks and then filling the one gap with a piece of wood but if that fails, I`ll need a replacement if you`ve got any ideas of where to get one ..
-
Well that is unusual. If you decided to replace it rather than repair I think the usual built up type would probably fit without too much trouble.
I`m going to have a go at PVA'ing the cracks and then filling the one gap with a piece of wood but if that fails, I`ll need a replacement if you`ve got any ideas of where to get one ..
I would chose some thinnish superglue for the cracks as it has good capillary action to draw the adhesive into the cracks
-
I use your Superglue technique for making sure box ends are sealed (unless there are glaring gaps, then PVA is needed) but the splits here are clean and open so PVA is the only possible rescue - looks like I`ll have a replacement Erika one coming anyway :) but I`ll have a go at salvaging this one as a project anyway
-
If the worst came to the worst, you could always run a planer over the top to give some depth to add a top plate. To be honest, the top of the keyboard isn't actually necessary to the action. We had one guy in the area who played a Corona which had lost nearly all the top face - didn't worry him or the box a bit.
Rob.
-
Yup, it`s amazing what you can get used to - it`d been a while since playing a plastic fingerboard Pokerwork/Erica without the button travel limited when I got my current Erica and it was weird having my fingers disappearing down the holes, I`ve promised myself to do the Theo-mod (wood strip under the action) after the Club-Too is done but by then , I`ll probably be used to it again and not bother ;) ......
I`d rather have a fingerboard with all the holes intact but I`d take a Corona-III with bits missing than none at all :D
-
Hokay the 1st stage is done ...
I always do the structural and cosmetics before the waxing / valves / pallets etc because having a nice looking box in front of me give me incentive to do the less enjoyable tasks and I do it an end at a time ..
the past two 30s Hohners I recovered, I "relic`d" , their finishes were totally trashed but apart from the varnish going chalky (faintest touch leaves a while line) and buckle rash underneath, the box`s cosmetics are savable .. I used Acetone to de-chalkify the varnish rather than trying to sand as I wanted the Hohner `transfers and as much of the stain as possible intact - I then used Finishing oil on top in numerous coats followed by Warwick bass guitar finishing wax , it`s worked, it`s fixed and stable , no chalkiness and only a bit of the red in Hohner was lost , in fact it`s helped the "loved" look of the box , the buckle scratches underneath now look natural and the front end has now got the Not-mint but genuinely nice look ..
I painted the grille in black , I dislike silver paint in the extreme (the orig was gold) and made a grille cloth from a tiger print chiffon scarf from a charity shop (as it was yellow / brown) ..
The Fingerboard is made from the crappiest wood , the thick hohner paint was covering up all sorts of issues such as areas around a knot (the knot itself being on the bit they discarded and the rest of the wood pitted and poor .. I PVAd the cracked parts and made a bridge between the broken bits with matchwood and PVA'd in , more PVA used afterwards under and on top of the breaks to finish and the lot was sanded and painted - I left the underneath intact due to the labelling .. I still really would like to buy Robotmay's donor fingerboard as its a two-part Erika one and in better nick but I did this one as a project anyway ..
Last bit was to do Lester's trick of running superglue around the inside of the fondo and edge joins on the reedblock side to remove any potential leaks ..
Pics of the Pre-painted but repaired fingerboard and the whole front end done - Please remember that I`m not a Chippie ;)
-
Very nice! I particularly like the chiffon scarf - was that just happenstance that it turne up or has it been waiting to find an application? I agree the overall look is not concourse, but well loved. The Black grille is great, wonder if paint will stick to the chromed grille on the Pokerwork? Not once I start trying to lever it in and out, amazing how they always make the grille larger than the hole...
Rob.
-
If the grill gets tight just bend the turned edged slightly further back, especially in the vicinity of the fixings where they tend to get distorted.
-
Thanks Rob - I actually went to the charity shop this morning with grille in hand to see what worked - black ladies slips, white net curtains, cream bed throws and other Chiffony things were looked at (much to the amusement of the old lady running the shop) - the scarf was the right colour and I like the brown streaks as they`re more transparent and you can see the pallets through them ..
the underneath buckle scratches are under the finishing oil and look "worn in" rather than messy, it`s a good look IMO especially as I didn`t want to sand back and lose the graphics and stain (which would have ended up patchy), the box looks natural rather than restored or tidied up .
Paint flakes off chrome too easily sadly Rob - you`ll need to either remove it (not hard with rusty Hohner grilles) or find a primer which will stick
-
Yes, I know - but this Chinese one resists all attempts. If I get the best fit at the fasteners, which is pretty much imperative, it gets tight at the corners... and so it goes on. It might work if I gently shave some wood out of the aperture, after all that's what the grille does every time I fit it, and I'd rather not end up with a bent grille.
Rob.
P.S. You can buy aerosols of car odours, e.g. New Rolls Royce, etc. I wonder what they call the one they seem to use in UK charity shops? Now there's a thought that'll take some beer to forget.
-
Here are the two Relic boxes I did .. 1st was a black Doubleray from the same era as the Club Too - it looked as if it had been pulled out of a swamp, I`d never seen a box so mechanically sound so seriously trashed cosmetically....... Like the Club-Too, it was pristine inside and had never been opened, I`ve pics of the box as I got it ..
Second was a HA114-G which was in the same nick , sold to me at a good price by Tommy Gipsylad , it also looked like it had sunk onboard the titanic and likewise was in good tune .. I did both of these over 3 years ago
-
How did you clean up the case but preserve the decals on the Modell II? I am impressed (:)
-
I used Acetone (Nail varnish remover) carefully to clean up and seal the old chalky varnish , I didn't know if it would do it well but it worked..
Then used Liberon finishing oil afterwards, if you use enough coats and let them dry for half a day or more inbetween, it builds a shine even on non-bare wood.. the Warwick bass guitar surface finisher (like a tin of polish for their oiled basses) got it even and adds a tough surface . I used the warwick wax on the fingerboard also which I`d painted with a Matt "match-pot" (the tube type with the sponge applicator) as it made for a more natural looking surface than brushed gloss paint
-
I really like the look of the one row.....nice job! ;)
-
Thanks Forrest, it was utterly Mullered cosmetically and had a plastic fingerboard on (doesn't work with no grille , wood does) but I also at the time had a C one in "normal" nick with the grille on with a wooden F/board so swapped them over ... the air-spoon had been hacked down and put inside & had a button put on it for actuation, lester found me a suitably rusty spoon to replace it with so I could de-modify that, he did the bellows taping, the Italian ridged tape suits these boxes beautifully and is tougher
-
Fascinating thread Adam thanks!
-
It continues -- the bass plate is varnished like the ends rather than painted black so I`m doing the same with the acetone to fix the old varnish and loads of finishing oil on top and replace the cloth over the holes with more tigerprint chiffon (one hole was pushed through otherwise I`d have left the original cloth there ...
I`ll do the back end then like the front preserving the graphics but I need a wood step riser thing for the buttons if anyone knows where to get one (same as a pokerwork and all the 2815 type boxes) , if I made one it`d look bodgy in the extreme .
then clean up the bellows corners (the bellows are in good nick even cosmetically) , I do need to fix a patch on one of the gussets, I was going to use a piece of thin washleather , any idea what to stick it with ? .....
-
Wash leather isn't airtight. I piece of thin soft lambskin or goatskin would be ideal. The adhesive should be something that remains flexible when set.
-
Thanks Theo - Evostik seems like a valid glue then and buying a gusset from Charlie Marshall and cutting a piece from that, the hole is on the flat part not a crease thankfully
-
I wouldn't use evostick if you want a permanent fix. I use Feibings LeatherCenent which is a type of pva. Bookbinding pva would work too.
-
Excellent , thanks .. I`ll see where I can find some
-
I wonder how many of us have dabbed a little nail varnish remover on the back of an old box in the hope of getting such a nice finish? Do you know the main ingredients of the Liberon finish? I have some Deks Olje in the kitchen.
Rob.
-
I have no idea what`s in it - the stuff was recommended to me by someone on the forum and a tin seems to last forever, it`s really for bare wood and is easier to get a good finish on than varnish, doesn`t chip and looks better ...... Deks Olje ? - that`s gotta be a Swedish anagram surely
-
Do you know the main ingredients of the Liberon finish?
http://www.liberon.co.uk/oils/gallery_files/site/2136/7731/7746/7750/19700.pdf (http://www.liberon.co.uk/oils/gallery_files/site/2136/7731/7746/7750/19700.pdf)
-
Thanks Lester, it unfortunately seems to get around revealing what it is by just saying "oil". I suspect that like quite a few finishes it may be principally tung oil as this is the oil commonly blended into other oils as a drying agent. Anyone who uses a wok will have become aware that boiling an oil makes varnish, trying to clean the stove top proves it! I finally got it clean by soaking it in industrial strength detergent - exceeding recommended times threefold. Omly trouble is it also removed the markings aroung the control knobs.
Deks Olje isn't an anagram, though perhaps we should have a competition along those lines. I comes in two versions, the first a saturator which gives a matt or satin finish depending how many coats are applied and the second is a drying, gloss overcoat. They are great but don't give a durable, permanent finish. Well, not on my boat anyway.
Rob
-
Rear end done .. I like that the bass plate is varnished too on this box , it cleaned up the same as the rest :) ..
I need a bass button Riser - if I attemped to make one, it`d look too damn amateursish so has anyone out there got one to spare ?, it`s the same as all the other Hohners with them (Pokerworks etc) .
-
Actually they aren't that difficult to make. I replaced the one on the pimped Modell II in the pix here:
http://www.jollyrogeraccordions.co.uk/archive_of_boxes/hohner-modell-ii-cf-melodoen-for-sale/
(NB the box is now sold)
I made it from American oak. You just need to get the dimensions right and the holes in the right place. I shaped it with a sander (though at one pointed the band sander got a bit hot, broke and jumped a fair distance... and made me jump a bit too (:) )
It helps if you have the old one to use as a template.
-
that box looks superb . I`ve only got a bit of the original riser - I`m going to PM Robotmay of this Parish to see if his scrap Erika has one on
-
Pallets now refaced and refitted, one pallet has slightly oversized facing as I was concerned about the coverage of the original (bit close, those corner cut pallets are a pain)
............ The hot glue gun is messy but with a "de-whiskering wand" at hand at least the mess stays outside the melodeon - I`m sure many here produce a nicer finish to the glue than I do (or Hohner does even as the Vallenato I had was a right mess) but it must be an art ;) , no matter it does the job, is easily reversible and the thing has a GRILLE :D .
levelling the action isn`t fun with the rather unique unified fingerboard this box has (the top doesn`t come off) especially as its a wood one and easily damaged so I levelled the buttons with it off and refitted afterwards - I`m looking forward to getting the Erika type one from Rob which will allow me to set the button height perfectly, get a smoother action and have travel limiting felt underneath as this one is like a Pokerwork one but bigger, the buttons disappear and unlike the Corona one , there`s no removable panel underneath :(
-
Not seen those pallets with the corners cut off, very odd.
I would have stripped the bass mech and cleaned the corrosion off myself especially around the pivot area.
-
I don`t like disassembling mechs unless something is wrong so I just scrubbed the pivot part with a fine wire brush and used graphite powder - same with the rods (though used Emery on the rods themselves) , the action is fine :) .
Another thing I`ve noticed which I`ve not seen before I a Hohner is the bellows gasket, I`ve only seen the rope type on these old boxes, this had 4 strips of thin pallet type leather instead , I thought it may have been redone at some stage but when I came to remove it, it looked totally original and left a lovely clean surface.
-
Interesting those missing corners on the pallets. My Club Modell 1 had a problem with just those pallets lifting too high and lifting the arms of the pallets on the other row. Luckily, the fingerboard has a removeable top so I could lay a thin batten and some felt under the levers to restrict the action and still refit the keyboard - but cutting the corners off would have solved the problem, albeit with more work involved.
The trouble with scraping rust off anything ferrous is that it also scrapes off more of the original protective coating. I was thinking along the lines of reducing the built up rust with a fibreglass brush and then maybe using some rust converter to prevent recurrence. Perhaps furniture polish to help repell humidity? All the advice on the forum is to avoid leaving any residue which could hold dust, but I wonder about the guitarists' method of nut lubrication where vaseline is used as a carrier for graphite powder. If the mix were saturated it might do the trick with minimal potential for holding dust. I guess there is a difference between the normal practice of a professional restorer who is working on a box which the owner doesn't maintain himself and what may work for an owner who is willing to routinely do some work for optimum performance?
Rob.
Rob.
-
The trouble with scraping rust off anything ferrous is that it also scrapes off more of the original protective coating. I was thinking along the lines of reducing the built up rust with a fibreglass brush and then maybe using some rust converter to prevent recurrence. Perhaps furniture polish to help repell humidity?
Great ideas Rob but in all fairness, these "Pokerwork" bass mechs are pretty crude and will even work OK when caked with dry rust (they just squeak), and I`d guess that most out there are being played like this happily - LOL ... I doubt there`s much in the way of protective coating on the metal to begin with and it`d have long gone by now (Hence the rust) , all of the ones I`ve encountered have been rusty to some degree, even pretty newish ones . I scrubbed off the worst near the pivots and dusted with graphite (which probably won`t last long but I doubt it`s had anything done before and was working OK even then) ..
I`ve not seen corner cut pallets before either, but then I`ve never opened a Modele II / Erika before .
-
Pallets now refaced and refitted, one pallet has slightly oversized facing as I was concerned about the coverage of the original (bit close, those corner cut pallets are a pain)
............ The hot glue gun is messy but with a "de-whiskering wand" at hand at least the mess stays outside the melodeon - I`m sure many here produce a nicer finish to the glue than I do (or Hohner does even as the Vallenato I had was a right mess) but it must be an art ;) , no matter it does the job, is easily reversible and the thing has a GRILLE :D .
levelling the action isn`t fun with the rather unique unified fingerboard this box has (the top doesn`t come off) especially as its a wood one and easily damaged so I levelled the buttons with it off and refitted afterwards - I`m looking forward to getting the Erika type one from Rob which will allow me to set the button height perfectly, get a smoother action and have travel limiting felt underneath as this one is like a Pokerwork one but bigger, the buttons disappear and unlike the Corona one , there`s no removable panel underneath :(
I've just had the same issue - had to find a dewhiskering wand fast in mid job. Having a bit of faff with the key height. The Erika does have a removable keyboard, but the Celluloid part has shrunk, so all buttons are also fouling the sides of the holes in different places either end of the row.
I ended up using fingers to bend rods and things are slightly twisted now - just a patience job I think.
Are wooden retro-fit keyboards likely to be a bigger fit than the old celluloid one?
-
I`ve never seen a Wooden, plastic or any other kind of retro-fit for these models, if it breaks you have to fix it , bodge it or find another from a donor box . the Pokerwork style one on mine is original and seems to pre-date the far more sensible celly-topped variety , thankfully another member is supplying me with an Erika one , setting up the keys with the Pokerwork-design one is a nightmare and your fingers disappear in the holes like the regular 2 row boxes :( . No wonder they designed the celly-topped and later on the removable base ones .
-
Nice clean reedblock - very messy job, the plates are still amazingly "Silvery" for old zinc jobs , Valving and waxing next .. one note, it`s amazing how rough these reedblocks can be, there was split wood into the chamber where a reednail had been fitted badly (now sorted in case it fouled a reed or valve) and more than one nail hole suggesting they`d fitted it badly at first.. these old Hohner blocks are rather well made and far better than some of the early Italian ones which are very poorly made indeed
Note the proper wood wedges for the treble reed voicing (not Wax, putty or chewing gum), and the knobbly bit on the end for an accidental / proper blocked out chamber for the small acc -no early Italian style wax`n`paper botches here .
-
One weak point to check on many Hohner blocks is the glued joint to the sole plate at the end with the projecting toe. The sole can begin to break away at this point. I'm sure you would have noticed if it was badly cracked, but it is always work checking.
-
thanks Theo , thankfully the sole plates are in lovely condition (and flat) and well glued on :) .
Reeds cleaned and valved, one reedblock now waxed, not quite as smart a job as my past work (had a bit of clean up to do) . I`ll use the smaller soldering iron on the others, it`s been a couple of years since I did this ::)
-
Both treble blocks waxed and valved - second one went far smoother and didn`t need any clean up because I used the right soldering iron this time and was back in the swing (amazing what diff a couple of years out of the loop can do) .. BTW the blue marker on one reed denotes the Gleichton (so I know where it is)
I`ve got the bass blocks to wax and valve next week and then its a bit of tweak tuning in the treble (Trem difference is all it really needs) - the bellows gusset repair seems to be fine :D . after that it`ll be hopefully sorting the bits with Rob (Erika Kbd and Riser) and getting the box finished such as finalizing button height, sorting the air button (re-facing using thin stuff) , swivel Italian bellows straps and then unless the tuning needs intervention from a Pro - Enjoying :D .
-
I`ve got the treble end tuning in the ballpark , it only needed some tremolo levelling and it`s pretty much there - the two end Accs are a bit stuffy sounding so need to look into that .
But the Bass / chord blocks are now waxed and valved and in lovely tune so the box is almost finished .. I`ve enjoyed doing this slowly over a few weeks as a Project inbetween work rather than hammer on to get it done in a couple of days ..
-
Box now complete - I used Charlies rotating bellows straps with the nice 3-screw swivel ends and finished the Erika fingerboard like I did the "Relics" leaving some of the black behind ..
Fantastic box in sound and playing, I can see why Theo keeps one, this and the German ADG Corona-III will do me