Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Trish S on December 21, 2015, 11:57:38 AM
-
One of my G basses in my Saltarelle B/C Irish Bouebe has recently gone way off key, and I'm looking for someone who can do a re-tune for me (probably would be good to get ALL the reeds checked as they've never been done since I had it, over 10 years now!) I know some of you guys do your own, but not sure it's something I want to tackle myself! Any recommendations appreciated.
-
All the fettlers on this forum will do a good job for you. And they are all used to sending melodeons safely around the UK (and beyond).
Just email any of them and they'll give you an estimate of both cost and time.
-
Just had Theo (who is a founder of this site) tweak a few basses in my Serafini - and the strange thing is how good the right hand now sounds.
He's not too far south of you (Gateshead way) if you didn't want to post it.
Having seen how fiddly it was, I'm glad I didn't attempt it myself.
-
I'd be happy to help Trish, just get in touch by email if you would like to go ahead.
Btw from your description it sounds as if one of the reeds is cracked and will need to be replaced.
-
One of my G basses in my Saltarelle B/C Irish Bouebe has recently gone way off key, and I'm looking for someone who can do a re-tune for me (probably would be good to get ALL the reeds checked as they've never been done since I had it, over 10 years now!) I know some of you guys do your own, but not sure it's something I want to tackle myself! Any recommendations appreciated.
Hi Trish.
I can recommend Theo, he has done work for me, and as has been said, it's not that far away from youl.
John
-
Another vote for Theo, particularly as he's closest to you.
I fear he's probably right that the offending reed is probably cracked and will need to be replaced. I've had satisfactory tuning done just by sending Theo the reed blocks, although they will sound a slightly different pitch inside and outside the box he can set the retuned reeds to match the others on the block so they will be correct when refitted, but if you really want the best results it's worth sending the whole box, let him do an assessment and then discuss exactly what you want done. Call or email him and he'll advise you on how to proceed. It's a lovely trip down across the moors in good weather, but not so much fun this time of year as you'd end up travelling in the dark both ways! Damn this Christmas post - evrything takes so much longer.
Rob.
-
Thanks for all the advice guys! The really galling thing is that I was at the Button Boxes and Moothies weekend in Aberdeen in November, and Theo was there - but I didn't have this problem at the time!! :( Have been given a couple of names a bit nearer to home, but if that doesn't work out, I'll be in touch with Theo. Was playing today and just kept off that dodgy G!
-
As atemporary fix you can open up the box and put a bit of sticky tape over the offering reed.
-
I just tried a temporary fix on my car door. I asked our local mechanic why they had the star shaped allen key bolts on them, and he said it was to keep people like me from attempting temporary fixes.
-
Torx wrenches is what you want
http://www.screwfix.com/p/long-arm-hex-torx-key-set-9pcs/49554
John
-
If they used Torx fasteners on melodeons, there'd be precious few in working condition - or we'd all have a set of wrenches.
Rob.
-
If they used Torx fasteners on melodeons, there'd be precious few in working condition - or we'd all have a set of wrenches.
Rob.
I've had a box in the workshop which had torx fasteners, seem to think it was a Serafini but I could be wrong
-
I'll take some of John's suggestions with a pinch of rehydration salts! ;)
Being a B/C player, you'll guess I don't use the left hand as much as some D/G players, so I can probably survive without taping it over until I get it fixed properly, but thanks for the suggestion. Slightly distracted by the festive season, :|glug but weighing up all the options and ideal timing!
-
If they used Torx fasteners on melodeons, there'd be precious few in working condition - or we'd all have a set of wrenches.
Rob.
IMHO far superior to those awful cross head screws Rob - easier for the relative novice too as there is little or no 'cam out' involved and the cost of drivers has come way down now - although as with screwdrivers cheap ain't always good value ;)
Besides, which melodeon fettler doesn't keep a lump hammer and cold chisel handy......................................................................
-
I needed some Torx security screws undoing on one of my vacuum cleaners in Egypt a while ago, and was fortunate enough to find these in a tool shop just a few metres away from our building. They were packaged as "Star Shaped Allen Keys" and cost the princely sum of £2.
(http://)
-
Oh hell, you've caught VCAD as well as MAD ? £2 ?? thats almost half the cost of a concert condition melodeon, Edward, you need to seek professional help before its too late.
Trish, see what happens to the innocent - don't visit, send your box to the fettler, if you visit all is lost, the sparkly little things look so innocent and cute on their shelf, another one cannot possibly harm, then before you know it you need an old factory warehouse to store them all in ;D
-
I agree, torx are better than pozidrive, but I would still prefer allen head - though they're difficult to come by in countersunk or shallow head forms. It's funny how difficult it can be to revise your opinions to keep up to date over the years. I well remember when the automotive trade started using torx, purely to stop amateurs from having access to certain parts of their cars. Only specialist tool suppliers had the wrenches in those days and they were stupidly expensive for what they are. One had to buy them for the employer's workshop and then borrow them!
Rob.
-
VCAD Richard? (Virtual Crap Acquisition Disorder, possibly?)
-
...you need an old factory warehouse to store them all in ;D
I sometimes think I should start making glass fronted display case with shelves deep enough to accomodate a collection of boxes - possibly cupboard beneath to store the cases? Probably too much of a niche market, but I've never come across any furniture that would serve the purpose.
Rob.
-
...you need an old factory warehouse to store them all in ;D
I sometimes think I should start making glass fronted display case with shelves deep enough to accomodate a collection of boxes - possibly cupboard beneath to store the cases? Probably too much of a niche market, but I've never come across any furniture that would serve the purpose.
Rob.
Ollie King has posted some lovely pictures of just such a thing on his FB page...apparently something called Kallax from IKEA is what you need...take a map, compass and Kendal Mint Cake...
-
Ollie King has posted some lovely pictures of just such a thing on his FB page...apparently something called Kallax from IKEA is what you need...take a map, compass and Kendal Mint Cake...
(http://www.ikea.com/gb/en/images/products/kallax-shelving-unit__0243961_PE383235_S4.JPG)
-
VCAD Richard? (Virtual Crap Acquisition Disorder, possibly?)
Nah, Vacuum Cleaners ;) much more compact than a pal who collects twin tub washing machines, last I heard he was just over the hundred plus a few doubles for spares, now, regardless of the acronym, that is truly MAD ::)
-
No, no! I need the two vacuums in Egypt. You've no idea of the amount of dust we get there. One's for the tiles and the other is for the carpets, entirely different. (I have a lovely one here in England, though. It even drives itself!)
Note to the moderator: This is melodeon related, as I need to vacuum out my old melodeons from time to time, as they slowly disintegrate.
-
No need to be in (or near) De Nile here old chap, you are among friends who recognise the inner turmoil which leads to the odd freudean slip of an unintended multiple being dropped, innocently, into conversation.
-
OK, OK, don't rub it in! I admit it. I was also once known (in an earlier life) as "Edward Two Sheds". It's becoming apparent that I just cannot help myself! Pehaps if kind, well-meaning people sent me their old melodeons, it might have some sort of therapeutic effect?
What do you think? Anyone?
-
Doesn't seem to work quite like that Edward, I tried it (elsewhere) with no longer required pipes to add to my arsenal, but all they did was try to sell 'em to me - and I've just missed a couple of nice Danish ones on Ebay which were sniped at the last millisecond >:(
Clumps off to bed grumbling like a well practiced old git ;)
-
Funnily enough I once had one of those IKEA things - bought at the house clearance as one of our Japanese engineers got repatriated. Sadly it was a present for a lad who wanted to display all his toys in tableaux and not for me.
Rob.
-
If they used Torx fasteners on melodeons, there'd be precious few in working condition - or we'd all have a set of wrenches.
Rob.
I've had a box in the workshop which had torx fasteners, seem to think it was a Serafini but I could be wrong
You would be right ... Mine has them.
Roger
-
You've no idea of the amount of dust we get there. One's for the tiles and the other is for the carpets, entirely different. (I have a lovely one here in England, though. It even drives itself!)
Note to the moderator: This is melodeon related, as I need to vacuum out my old melodeons from time to time, as they slowly disintegrate.
Oh, yes I have! (Pause for panto-season response.......). It's just the same here in Cyprus; you get through vacuum cleaners like nobody's business. I have to vac my boxes out frequently too (no, that's NOT a euphemism!)
Graham
-
Well, after that wee run about Star Wars or whatever it was, delighted to report that I finally got my box fixed.................by Theo, last week, so thanks again for the recommendations. It had to wait until after the "serious Burns season" with various gigs, during which I had to remember not to touch the offending button. Theo replaced the G/C bass reed combination, so all now sounding fine again. :|||:
-
Glad to hear Theo replaced your combinations Trish.
Sir John
-
For future ref I've used Robert Rolston http://www.manfriniaccordions.co.uk/about-us.html near Alloa in the past
Paul