Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: up-fiddler on December 31, 2015, 12:01:30 PM
-
Hey all.
I am trying to learn - here in the middle of nowhere - to repair/restore melodeons. Toward that end, I have purchased four two-row Hohners and a Hohner Club 2 in various states of disrepair. My question is this - Is there a list/compilation of essential tools and parts I can order to get started? (I couldn't find it using the Search function if it exists.) I plan to purchase from Charlie Marshall in the early going. Folks here have recommended him in the past.
Thanks, in advance, for your thoughts and suggestions. Best wishes for a great 2016.
Dave
PS The 2 rows are all in C/F and the Club is in Bb/Eb.
-
Are you in the "States" ?
-
My workshop (http://homepage.ntlworld.com/goldfrog/workshop/index.html)
-
If you don't like Lester's original link, you could try this one (http://homepage.ntlworld.com/goldfrog/workshop/index.html). 8)
-
If you don't like Lester's original link, you could try this one (http://homepage.ntlworld.com/goldfrog/workshop/index.html). 8)
I had already fixed it ACTUALLY! (:)
-
Not when I clicked on it you hadn't :P :P :P
But worth a browse :-)
-
That is a good list from Lester, though for a straight forward restoration you are not likely to need the power tools.
Two of my favourite tools are:
1)An small old kitchen knife with the blade broken off at right angles. This is an invaluable tool for removing reeds and for scraping wax off reed and reed blocks. It is blunt on all edges so I can scrape quite firmly without damaging wood.
2) a sheet of abrasive paper glued onto a block of 3/4" ply, invaluable for sanding flat surfaces such as pallets.
I also use a small compressor, designed to run an airbrush, for blowing out dust from nooks and crannies. It is amazing how much dust comes out of a reed block after all the old wax has been scraped and brushed away.
-
Thanks so much! I already have a 28x30' woodshop and have built most everything from boats to a violin. The accordion/melodeon specific tools are the ones I am most interested in. Many of them look home built. I like that. Building jigs and tools is half the fun. (:)
I assume I should order reed wax and a couple sets of valves from Charlie to get started. Anything else that comes to mind right off?
Thanks again,
Dave
-
I'd get a large tin of Patience. It does what it says on the tin.
-
I'd get a large tin of Patience. It does what it says on the tin.
Got some but the lid's stuck on, guess I'll get a big hammer and sort it out (:)
-
Maybe just take one or two of the boxes apart and just have a good look at the bits and a bit of a think. Are you going to restore it, or are you OK with the thought it might get trashed?
You might want to remove and reface the pallets. Maybe some facing material. How are you going to refit them?
You're going to want to re-valve the reeds, treble and bass. Do any use helper springs? Check the lengths of existing valves before you buy. (Take some photos, too)
You might leave off tuning for now, or buy some reeds from elsewhere to practice (if you don't want to risk trashing this set). You will need some bellows for a tuning table, if you make one (although that can sometimes be rescued from the tired piano accordion that you bought cheap to practice tuning the reeds ;D )
Check the actions, springs look OK. Buttons? Check the bellows - you will probably want new gasket material (even if you get something locally) Bellows pins OK to re-use? Are you going to re-tape? Gussets look OK, no pin-holes (or moth-holes!)?
What about straps? Bellows straps still usable? Bass strap? Lengths? Are you likely to want to fit nicer ones? Are you going to fit/replace strap brackets for shoulders straps (have you got the straps?)?
Will you want to replace the grille cloths (maybe again locally)?
Just thinking - Charlie's pretty good at sending stuff, but you might want to minimise the number of orders that you have to pay postage on!
-
That is an excellent checklist, Malcolm. And, yes, I want to eliminate as many trips across the pond as possible. Postage on a $2 piece I may have forgotten will quintuple the price, or more. I have copied and pasted those into an increasingly long word document. Thanks again.
I picked up a PA for $15 and hope to practice on those reeds. I am using the bellows for the tuning mechanism. I have an old Concertone and a Supertone to work the bugs out of before jumping at the Hohners. For me, the process is always the most interesting portion of any new hobby. I love learning new things and skills. Time spent isn't really an issue. I am pretty particular with my work. I would rather do it proper than quick.
Thanks again to all.
Dave
-
A selection of piano wire diameters are handy for spring repairs - sourceable 'your side'
You may see 'Silver Steel' referred to in the UK, your equivalent is drill rod - file workable water quenched carbon steel.
-
Thanks for the 'translation' and the local sourcing ideas. ;)
Dave
-
A couple of things I can't do without that come to mind;
Selection of tiny drill bits (1mm range) and a small cordless drill that can handle the small bits.
A hardened steel shim to slide under reeds while tuning /scraping.
A set of small flat tip screw drivers for scraping prying.
Set of small wood chisels for scraping /carving.
A 1/4 thick sheet glass with sand paper glued to it for planing reed blocks and sanding pallets flat.
small.
Get a couple of destroyed PA's and take them apart for the tiny wood screws, these are hard to find in stores.
I sort the parts into bins and drawers for later use.
-
Get a couple of destroyed PA's and take them apart for the tiny wood screws, these are hard to find in stores.
I sort the parts into bins and drawers for later use.
Excellent advice - I've got a box of all sorts of odds and ends as well as a couple of tuning tables from the recycling of two or three unrepairable PAs picked up for peanuts or less. You also, if you're lucky and the instrument started life as a half-decent one, get a pile of reeds on which you can practice your tuning skills and discover the limits of the materials as well as your abilities, and to provide the basis for retuning to odd bisonoric pairs when you need to make a substitution. Tiny screws and springs in particular can be worth their weight in the precious metal of your choice.
Graham
-
if the PA is a Hohner then there`s Melodeon friendly bits such as pallets in there too - also with every PA you get a free set of Tuning table bellows
-
Thanks guys. Additions duly noted. I am taking apart a PA this evening since I have the rare Saturday night off.
Cheers and best wishes for 2016,
Dave