Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Rob2Hook on January 03, 2016, 04:07:27 PM

Title: Thanks - tuning bellows now working.
Post by: Rob2Hook on January 03, 2016, 04:07:27 PM
Many thanks to Jolly Roger who donated a set of Soprani bellows to make a tuning bellows.  The best tip of all was to use foam sheet from a craft shop to make things airtight and stop them sliding about.  It seems, so far, to stick down OK with PVA and held under pressure whilst drying - that spare car battery came in very useful sat on top of a teatray.  Of course there are some errors as I carefully screwed one end down only to find that one end of the bellows was wider than the other.  A few extra screws soon sorted that and it doesn't have to win a beauty pageant!

Had a thought about maybe incorporating it into a table with a treadle arragement.  One peddle to pull down and another for the other foot to pull them up...  With my construction skills I may attempt to farm that out to my mate who has a really good shed and just about every type of tool.

Rob.

P.S.  Now the bellows are mounted I can jam them open and spray with Febreze!
Title: Re: Thanks - tuning bellows now working.
Post by: Graham Spencer on January 03, 2016, 06:55:37 PM
I may attempt to farm that out to my mate who has a really good shed and just about every type of tool.

Ah, the really good shed is the key; apart from that you just need a couple of hammers and a big chisel........!! ;D

Graham
Title: Re: Thanks - tuning bellows now working.
Post by: Rog on January 03, 2016, 06:57:47 PM
Glad to hear it Rob. (:)  A hot glue gun is also very helpful when making something like this.
SimplePortal 2.3.5 © 2008-2012, SimplePortal