Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: hubert on January 04, 2016, 11:15:28 AM
-
Hello Mellnet ,I have a compardre box, which I think is very good value for money, my only complant is noisy bass buttons, can this problem be solved?....alan(hubert)
-
In my estimation the bulk of the noise from Erica/Corona/Compadre type bass ends comes from the buttons slapping in the holes. It can be rectified by reaming out the holes and fitting bushing felt (must be proper bushing felt, ordinary felt will not work). It is a trelativly simple job if you have confident woodworking skills.
-
thanks Lester,I think I had better leave this job to the experts.....alan(hubert)
-
Can I ask, in light of an ebay purchase yet to arrive, if it is the buttons slapping on the case, how does bushing help? I can see how that would cushion the travel of the rod, and help it from clacking against the sides, but do you leave the bushing felt proud of the case to support the button?
-
Yes to the last question.
Though with an Erica the buttons don't have a mushroom shape so doesn't apply there.
There is often another big source of noise - the slap as the pallet closes. It's easy to tell which you are hearing by observing whether the noise happens at the moment the button is released (pallet slap) or at other times when it is the button. Of course both noises are often present.
-
Ahh. Getting my Ericas and Erikas mixed up.